#0 0x00007fed9b53a2bd in nanosleep () at ../sysdeps/unix/syscall-template.S:82 No locals. #1 0x00007fed9b5649d4 in usleep (useconds=, useconds@entry=20000) at ../sysdeps/unix/sysv/linux/usleep.c:33 ts = {tv_sec = 0, tv_nsec = 20000000} #2 0x000000000046431a in dobackup (oldver=) at src/config.c:1218 argv = {0xac783b "/bin/tar", 0xac7814 "cjf", 0x7fffd993aad0 "/home/hts/.hts/tvheadend/backup/3.9.2380~ged513c0.tar.bz2", 0xac7818 "--exclude", 0xac7862 "backup", 0xac7818 "--exclude", 0xac7822 "epggrab/*.sock", 0xad5182 ".", 0x0} root = 0x304ed00 "/home/hts/.hts/tvheadend" outfile = "/home/hts/.hts/tvheadend/backup/3.9.2380~ged513c0.tar.bz2", '\000' "\240, \000\000\000\000\000\000\000\001\000\000\000\000\000\000\000\250^\201\233\355\177\000\000\000\000\000\000\000\000\000\000\220", '\000' , "\n\000\000\000\300", '\000' , "\n", '\000' "\220, \000\000\000\000\000\000\000@^\201\233\355\177\000\000\220\000\000\000\000\000\000\000\340\265\223\331\377\177\000\000\000\267\223\331\377\177\000\000\345^\000\000\000\000\000\000\240\230P\233\355\177\000\000\000\000\000\000\000\000\000\000\220\000\000\000\000\000\000\000 ȓ\331\377\177\000\000pǓ\331\377\177\000\000\340\265\223\331\377\177\000\000ٿX\233\355\177\000\000\000"... cwd = "/tmp", '\000' "\260, \000\000\000\000\000\000\214\251\000\000\000\000\000\000\214\251", '\000' , "\005\000\000\000\000\000\000\000\000\240 \000\000\000\000\000\000\300 \000\000\000\000\000`\261 \000\000\000\000\000\210\265 \000\000\000\000\000\000\240\000\000\000\000\000\000\003\000\000\000\355\177\000\000\260\004\000\000\000\000\000\000\230^\201\233\355\177\000\000\060\000\000\000\000\000\000\000\230^\201\233\355\177\000\000\250^\201\233\355\177\000\000\000\000\000\000B\000\000\000(", '\000' , "\003\000\000\000P\000\000\000\000\000\000\000\260\353\002\003\003\000\000\000\060\324\001\000\000\000\000\000\260\353\002\003\000\000\000\000@^\201\233\355\177\000\000(", '\000' , "H\360\002\003", '\000' "\240, \230P\233\355\177\000\000\340\346\002\003\000\000\000\000\260"... errtxt = '\000' arg = code = -11 #3 config_migrate (backup=1) at src/config.c:1289 v = 16 s = #4 config_init (path=, backup=1) at src/config.c:1419 st = {st_dev = 2049, st_ino = 23209282, st_nlink = 14, st_mode = 16832, st_uid = 106, st_gid = 107, __pad0 = 0, st_rdev = 0, st_size = 4096, st_blksize = 4096, st_blocks = 8, st_atim = {tv_sec = 1421527515, tv_nsec = 18811568}, st_mtim = {tv_sec = 1421532706, tv_nsec = 62663881}, st_ctim = {tv_sec = 1421532706, tv_nsec = 62663881}, __unused = {0, 0, 0}} buf = "/home/hts/.hts/tvheadend", '\000' homedir = new = #5 0x000000000042ca3e in main (argc=50515280, argv=0x7fffd993d688) at src/main.c:807 i = set = {__val = {18446744067267100671, 18446744073709551615 }} adapter_mask = 4294967295 log_level = log_options = log_debug = log_trace = buf = "D\031\030\000\000\000\000\000\360ӓ\331\377\177\000\000`ԓ\331\377\177\000\000\310\371<\235\355\177\000\000\002\000\000\000\000\000\000\000\b\273\270\234\355\177\000\000\200Γ\331\377\177\000\000\022\342\033\235\355\177\000\000\000\000\000\000\000\000\000\000\326\353\033\235\355\177\000\000\030 =\235\355\177\000\000\030ԓ\331\377\177\000\000 ԓ\331\377\177\000\000/ԓ\331\377\177\000\000\340\341\033\235\355\177\000\000`\177\265\234\355\177\000\000`ԓ\331\377\177\000\000\305\323\033\235\355\177\000\000\000@<\235\355\177", '\000' "\300, \250'\263\377\377\310\371<\235\355\177\000\000\002\000\000\000\000\000\000\000\b\273\270\234\355\177\000\000\200Γ\331\377\177\000\000\000\000\240\232'\263\377\377\000\000v\327\067:\333\377\020\000\000\000\000\000\000\000h\000\000\000\000\000\000\000\b\000\000\000\000\000\000\000P\345td\004\000\000\000Lt\025\000\000\000\000\000Lt\025\000\000\000\000\000Lt\025\000\000\000\000\000,h\000\000\000\000\000\000,"... pidfile = opt_help = 0 opt_version = 0 opt_fork = 1 opt_firstrun = 0 opt_stderr = 0 opt_syslog = 0 opt_uidebug = 0 opt_abort = 0 opt_noacl = 0 opt_fileline = 0 opt_threadid = 0 opt_ipv6 = 0 opt_tsfile_tuner = 0 opt_dump = 1 opt_xspf = 0 opt_dbus = 0 opt_dbus_session = 0 opt_nobackup = 0 opt_nobat = 0 opt_config = 0x0 opt_user = 0x7fffd993e885 "hts" opt_group = 0x7fffd993e88c "video" opt_logpath = 0x0 opt_log_debug = 0x0 opt_log_trace = 0x0 opt_pidpath = 0xac0ce4 "/var/run/tvheadend.pid" opt_dvb_adapters = 0x0 opt_bindaddr = 0x0 opt_subscribe = 0x0 opt_user_agent = 0x0 opt_satip_xml = {max = 10, num = 0, str = 0x302b010} opt_tsfile = {max = 10, num = 0, str = 0x302b070} cmdline_opts = {{sopt = 0 '\000', lopt = 0x0, desc = 0xac0cfb "Generic Options", type = OPT_BOOL, param = 0x0}, {sopt = 104 'h', lopt = 0xac0d0b "help", desc = 0xac0d10 "Show this page", type = OPT_BOOL, param = 0x7fffd993cba4}, {sopt = 118 'v', lopt = 0xaf35e6 "version", desc = 0xac0d1f "Show version infomation", type = OPT_BOOL, param = 0x7fffd993cba8}, {sopt = 0 '\000', lopt = 0x0, desc = 0xac0d37 "Service Configuration", type = OPT_BOOL, param = 0x0}, {sopt = 99 'c', lopt = 0xad46e8 "config", desc = 0xac0d4d "Alternate config path", type = OPT_STR, param = 0x7fffd993cbf0}, {sopt = 66 'B', lopt = 0xac0d63 "nobackup", desc = 0xac08e8 "Do not backup config tree at upgrade", type = OPT_BOOL, param = 0x7fffd993cbe8}, {sopt = 102 'f', lopt = 0xac0d6c "fork", desc = 0xac0d71 "Fork and run as daemon", type = OPT_BOOL, param = 0x7fffd993cbac}, {sopt = 117 'u', lopt = 0xac0d8f "user", desc = 0xac0d88 "Run as user", type = OPT_STR, param = 0x7fffd993cbf8}, {sopt = 103 'g', lopt = 0xac0d9b "group", desc = 0xac0d94 "Run as group", type = OPT_STR, param = 0x7fffd993cc00}, {sopt = 112 'p', lopt = 0xac0cf7 "pid", desc = 0xac0da1 "Alternate pid path", type = OPT_STR, param = 0x7fffd993cc20}, {sopt = 67 'C', lopt = 0xac0db4 "firstrun", desc = 0xac0910 "If no user account exists then create one with\nno username and no password. Use with care as\nit will allow world-wide administrative access\nto your Tvheadend installation until you edit\nthe access-con"..., type = OPT_BOOL, param = 0x7fffd993cbb0}, {sopt = 85 'U', lopt = 0xac0dbd "dbus", desc = 0xac0dc2 "Enable DBus", type = OPT_BOOL, param = 0x7fffd993cbe0}, {sopt = 101 'e', lopt = 0xac0dce "dbus_session", desc = 0xac0a00 "DBus - use the session message bus instead system one", type = OPT_BOOL, param = 0x7fffd993cbe4}, {sopt = 97 'a', lopt = 0xac12e2 "adapters", desc = 0xac0a38 "Only use specified DVB adapters (comma separated)", type = OPT_STR, param = 0x7fffd993cc28}, {sopt = 0 '\000', lopt = 0xac0ddb "satip_xml", desc = 0xac0a70 "URL with the SAT>IP server XML location", type = OPT_STR_LIST, param = 0x7fffd993cc50}, {sopt = 0 '\000', lopt = 0x0, desc = 0xac0de5 "Server Connectivity", type = OPT_BOOL, param = 0x0}, {sopt = 54 '6', lopt = 0xac0df9 "ipv6", desc = 0xac0dfe "Listen on IPv6", type = OPT_BOOL, param = 0x7fffd993cbd0}, {sopt = 98 'b', lopt = 0xac0e0d "bindaddr", desc = 0xac0e16 "Specify bind address", type = OPT_STR, param = 0x7fffd993cc30}, {sopt = 0 '\000', lopt = 0xac0e2b "http_port", desc = 0xac0e35 "Specify alternative http port", type = OPT_INT, param = 0xfb5d5c}, {sopt = 0 '\000', lopt = 0xac0e53 "http_root", desc = 0xac0a98 "Specify alternative http webroot", type = OPT_STR, param = 0xfb5cf0}, { sopt = 0 '\000', lopt = 0xac0e5d "htsp_port", desc = 0xac0e67 "Specify alternative htsp port", type = OPT_INT, param = 0xfb5d08}, {sopt = 0 '\000', lopt = 0xac0e85 "htsp_port2", desc = 0xac0e90 "Specify extra htsp port", type = OPT_INT, param = 0xfb5c20}, {sopt = 0 '\000', lopt = 0xac0ea8 "useragent", desc = 0xac0ac0 "Specify User-Agent header for the http client", type = OPT_STR, param = 0x7fffd993cc40}, {sopt = 0 '\000', lopt = 0xac0eb2 "xspf", desc = 0xac0eb7 "Use xspf playlist instead M3U", type = OPT_BOOL, param = 0x7fffd993cbdc}, {sopt = 0 '\000', lopt = 0x0, desc = 0xac0ed5 "Debug Options", type = OPT_BOOL, param = 0x0}, { sopt = 100 'd', lopt = 0xac0ef3 "stderr", desc = 0xac0ee3 "Enable debug on stderr", type = OPT_BOOL, param = 0x7fffd993cbb4}, {sopt = 115 's', lopt = 0xac0f0a "syslog", desc = 0xac0efa "Enable debug to syslog", type = OPT_BOOL, param = 0x7fffd993cbb8}, {sopt = 108 'l', lopt = 0xb0a014 "logfile", desc = 0xac0f11 "Enable debug to file", type = OPT_STR, param = 0x7fffd993cc08}, {sopt = 0 '\000', lopt = 0xac0f7d "debug", desc = 0xac0f26 "Enable debug subsystems", type = OPT_STR, param = 0x7fffd993cc10}, {sopt = 0 '\000', lopt = 0xad5649 "trace", desc = 0xac0f3e "Enable trace subsystems", type = OPT_STR, param = 0x7fffd993cc18}, { sopt = 0 '\000', lopt = 0xac0f56 "fileline", desc = 0xac0af0 "Add file and line numbers to debug", type = OPT_BOOL, param = 0x7fffd993cbc8}, {sopt = 0 '\000', lopt = 0xac0f5f "threadid", desc = 0xac0f68 "Add the thread ID to debug", type = OPT_BOOL, param = 0x7fffd993cbcc}, {sopt = 0 '\000', lopt = 0xac0f83 "uidebug", desc = 0xac0b18 "Enable webUI debug (non-minified JS)", type = OPT_BOOL, param = 0x7fffd993cbbc}, {sopt = 65 'A', lopt = 0xac0f97 "abort", desc = 0xac0f8b "Immediately abort", type = OPT_BOOL, param = 0x7fffd993cbc0}, {sopt = 68 'D', lopt = 0xafdbb0 "dump", desc = 0xac0f9d "Enable coredumps for daemon", type = OPT_BOOL, param = 0x7fffd993cbd8}, {sopt = 0 '\000', lopt = 0xac0fb9 "noacl", desc = 0xac0b40 "Disable all access control checks", type = OPT_BOOL, param = 0x7fffd993cbc4}, {sopt = 0 '\000', lopt = 0xac0fbf "nobat", desc = 0xac0fc5 "Disable DVB bouquets", type = OPT_BOOL, param = 0x7fffd993cbec}, {sopt = 106 'j', lopt = 0xac0fda "join", desc = 0xac0b68 "Subscribe to a service permanently", type = OPT_STR, param = 0x7fffd993cc38}, {sopt = 0 '\000', lopt = 0x0, desc = 0xac0fdf "TODO: testing", type = OPT_BOOL, param = 0x0}, {sopt = 0 '\000', lopt = 0xac0fed "tsfile_tuners", desc = 0xac0ffb "Number of tsfile tuners", type = OPT_INT, param = 0x7fffd993cbd4}, {sopt = 0 '\000', lopt = 0xac1013 "tsfile", desc = 0xac101a "tsfile input (mux file)", type = OPT_STR_LIST, param = 0x7fffd993cc60}} A debugging session is active. Inferior 1 [process 24294] will be detached. Quit anyway? (y or n) Detaching from program: /usr/bin/tvheadend, process 24294