Sat Nov 4 14:47:31 UTC 2017 | Orange Pi R1 | 5.34 | armhf | armv7l | 3.4.113-sun8i ### [resize2fs] 8GB media so leaving 2 percent spare area. Start resizing partition /dev/mmcblk0p1 now: major minor #blocks name 179 0 7822336 mmcblk0 179 1 1417216 mmcblk0p1 Executing fdisk, fsck and partprobe: Welcome to fdisk (util-linux 2.27.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): Selected partition 1 Partition 1 has been deleted. Command (m for help): Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): Partition number (1-4, default 1): First sector (2048-15644671, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (8192-15644671, default 15644671): Created a new partition 1 of type 'Linux' and of size 7.3 GiB. Command (m for help): Re-reading the partition table failed.: Device or resource busy The partition table has been altered. Calling ioctl() to re-read partition table. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8). Error: Error informing the kernel about modifications to partition /dev/mmcblk0p1 -- Invalid argument. This means Linux won't know about any changes you made to /dev/mmcblk0p1 until you reboot -- so you shouldn't mount it or use it in any way before rebooting. Error: Partition(s) 1 on /dev/mmcblk0 have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use. As a result, the old partition(s) will remain in use. You should reboot now before making further changes. New partition table: major minor #blocks name 179 0 7822336 mmcblk0 179 1 1417216 mmcblk0p1 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits: resize2fs 1.42.13 (17-May-2015) The filesystem is already 354304 (4k) blocks long. Nothing to do! ### [resize2fs] Automated reboot needed to finish the resize procedure Sat Nov 4 14:47:33 UTC 2017 | Orange Pi R1 | 5.34 | armhf | armv7l | 3.4.113-sun8i ### dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #13 SMP PREEMPT Sat Nov 4 07:45:43 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun8i [ 0.000000] cma: dma_declare_contiguous(266): ION reserve size should be 4m align! adjust size to 128MBytes [ 0.000000] cma: CMA: reserved 128 MiB at 48000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c098f5c0, node_mem_map c0ac8000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64960 pages, LIFO batch:15 [ 0.000000] script_init enter! [ 0.000000] script_init exit! [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d19000 s11968 r8192 d12608 u32768 [ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: root=UUID=20108e7f-a72e-47f3-9191-2bbb8b1c1eaa rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=5c5eed3d-01 ubootsource=mmc usb-storage.quirks= sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 111248k/111248k available, 150896k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d08ac (8995 kB) [ 0.000000] .init : 0xc08d1000 - 0xc0923ec0 ( 332 kB) [ 0.000000] .data : 0xc0924000 - 0xc0993e30 ( 448 kB) [ 0.000000] .bss : 0xc09945e4 - 0xc0ac7a00 (1230 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000495] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.000545] pid_max: default: 32768 minimum: 301 [ 0.000862] Security Framework initialized [ 0.000912] AppArmor: AppArmor disabled by boot time parameter [ 0.001289] Mount-cache hash table entries: 512 [ 0.003271] Initializing cgroup subsys cpuacct [ 0.003304] Initializing cgroup subsys memory [ 0.003395] Initializing cgroup subsys devices [ 0.003421] Initializing cgroup subsys freezer [ 0.003444] Initializing cgroup subsys blkio [ 0.003495] Initializing cgroup subsys perf_event [ 0.003655] CPU: Testing write buffer coherency: ok [ 0.003750] ftrace: allocating 24834 entries in 73 pages [ 0.060563] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060597] [sunxi_smp_prepare_cpus] enter [ 0.060670] Setting up static identity map for 0x4061edd8 - 0x4061ee30 [ 0.062544] CPU1: Booted secondary processor [ 0.062544] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.070640] CPU2: Booted secondary processor [ 0.070640] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.070942] CPU3: Booted secondary processor [ 0.070942] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.080355] Brought up 4 CPUs [ 0.080389] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.081805] devtmpfs: initialized [ 0.096399] wakeup src cnt is : 2. [ 0.096424] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.096447] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0 [ 0.096469] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.096493] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.096515] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8 [ 0.096537] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.096560] sunxi pm init [ 0.096846] pinctrl core: initialized pinctrl subsystem [ 0.107302] NET: Registered protocol family 16 [ 0.109313] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.109313] script_sysfs_init success [ 0.109313] sunxi_dump_init success [ 0.109313] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.109313] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.109553] plat: add bmp085 device [ 0.109575] plat: add pcf8591 device [ 0.109657] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.109683] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110215] script config pll_video to 297 Mhz [ 0.110251] script config pll_de to 864 Mhz [ 0.110312] script config pll_ve to 402 Mhz [ 0.110341] sunxi_default_clk_init [ 0.110356] try to set pll6ahb1 to 200000000 [ 0.110395] try to set ahb clk source to pll6ahb1 [ 0.110412] set ahb clk source to pll6ahb1 [ 0.110431] try to set ahb1 to 200000000 [ 0.110453] try to set apb1 to 100000000 [ 0.130464] bio: create slab at 0 [ 0.130640] [ARISC] :sunxi-arisc driver v1.04 [ 0.147822] [ARISC] :arisc version: [v0.1.58] [ 0.256741] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.260909] SCSI subsystem initialized [ 0.261316] usbcore: registered new interface driver usbfs [ 0.261467] usbcore: registered new interface driver hub [ 0.261519] usbcore: registered new device driver usb [ 0.261519] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.261519] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.261519] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.261839] Linux video capture interface: v2.00 [ 0.262331] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.263863] cfg80211: Calling CRDA to update world regulatory domain [ 0.270075] NetLabel: Initializing [ 0.270075] NetLabel: domain hash size = 128 [ 0.270077] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.270182] NetLabel: unlabeled traffic allowed by default [ 0.271229] Switching to clocksource arch_sys_counter [ 0.297202] FS-Cache: Loaded [ 0.297763] CacheFiles: Loaded [ 0.321406] NET: Registered protocol family 2 [ 0.344883] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.345968] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.346250] TCP bind hash table entries: 8192 (order: 4, 98304 bytes) [ 0.346549] TCP: Hash tables configured (established 8192 bind 8192) [ 0.346571] TCP: reno registered [ 0.346595] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.346655] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.347328] NET: Registered protocol family 1 [ 0.348148] RPC: Registered named UNIX socket transport module. [ 0.348172] RPC: Registered udp transport module. [ 0.348190] RPC: Registered tcp transport module. [ 0.348207] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.348601] Trying to unpack rootfs image as initramfs... [ 1.037922] Freeing initrd memory: 5048K [ 1.039204] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 1.039445] sunxi_reg_init enter [ 1.041310] audit: initializing netlink socket (disabled) [ 1.041411] type=2000 audit(1.040:1): initialized [ 1.044171] VFS: Disk quotas dquot_6.5.2 [ 1.044559] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.045695] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.046066] misc fatfs initialized [ 1.046515] NFS: Registering the id_resolver key type [ 1.047284] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.047313] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.048821] NTFS driver 2.1.30 [Flags: R/W]. [ 1.049433] fuse init (API version 7.18) [ 1.050576] msgmni has been set to 483 [ 1.053518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.053553] io scheduler noop registered [ 1.053571] io scheduler deadline registered [ 1.053700] io scheduler cfq registered (default) [ 1.054522] [DISP]disp_module_init [ 1.055129] cmdline,init_disp= [ 1.055195] cmdline,disp= [ 1.063847] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! [ 1.079982] Console: switching to colour frame buffer device 90x36 [ 1.098311] [DISP]disp_module_init finish [ 1.098767] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 1.098801] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. [ 1.098830] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. [ 1.099760] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 1.099787] sw_uart_pm()890 - uart0 clk is already enable [ 1.099824] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 1.100158] console [ttyS0] enabled [ 1.100843] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 1.101392] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 1.102479] sunxi_cmatest_init enter [ 1.102568] sunxi_cmatest_init success [ 1.111176] brd: module loaded [ 1.119473] loop: module loaded [ 1.120002] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 1.120080] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 1.121416] spi spi0: master is unqueued, this is deprecated [ 1.122652] spi spi1: master is unqueued, this is deprecated [ 1.124641] PPP generic driver version 2.4.2 [ 1.125041] PPP BSD Compression module registered [ 1.125063] PPP Deflate Compression module registered [ 1.129991] PPP MPPE Compression module registered [ 1.130092] NET: Registered protocol family 24 [ 1.130238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.150435] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.150505] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 1.151468] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 1.170073] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 1.171318] hub 1-0:1.0: USB hub found [ 1.171362] hub 1-0:1.0: 1 port detected [ 1.192135] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.192195] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 1.192964] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 1.210065] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 1.211153] hub 2-0:1.0: USB hub found [ 1.211206] hub 2-0:1.0: 1 port detected [ 1.231979] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.232036] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 1.232788] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 1.250070] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 1.251159] hub 3-0:1.0: USB hub found [ 1.251208] hub 3-0:1.0: 1 port detected [ 1.271968] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272028] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 1.272822] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 1.290066] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 1.291174] hub 4-0:1.0: USB hub found [ 1.291223] hub 4-0:1.0: 1 port detected [ 1.292012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.312156] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.312219] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 1.312285] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 1.375171] hub 5-0:1.0: USB hub found [ 1.375211] hub 5-0:1.0: 1 port detected [ 1.395978] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.396038] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 1.396101] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 1.455180] hub 6-0:1.0: USB hub found [ 1.455223] hub 6-0:1.0: 1 port detected [ 1.476126] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.476185] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 1.476250] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 1.535074] hub 7-0:1.0: USB hub found [ 1.535115] hub 7-0:1.0: 1 port detected [ 1.555825] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.555883] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 1.555946] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 1.615067] hub 8-0:1.0: USB hub found [ 1.615103] hub 8-0:1.0: 1 port detected [ 1.615805] Initializing USB Mass Storage driver... [ 1.616272] usbcore: registered new interface driver usb-storage [ 1.616294] USB Mass Storage support registered. [ 1.616406] usbcore: registered new interface driver ums-alauda [ 1.616533] usbcore: registered new interface driver ums-cypress [ 1.616651] usbcore: registered new interface driver ums-datafab [ 1.616747] usbcore: registered new interface driver ums_eneub6250 [ 1.616846] usbcore: registered new interface driver ums-freecom [ 1.616946] usbcore: registered new interface driver ums-isd200 [ 1.617041] usbcore: registered new interface driver ums-jumpshot [ 1.617144] usbcore: registered new interface driver ums-karma [ 1.617241] usbcore: registered new interface driver ums-onetouch [ 1.617369] usbcore: registered new interface driver ums-realtek [ 1.617476] usbcore: registered new interface driver ums-sddr09 [ 1.617578] usbcore: registered new interface driver ums-sddr55 [ 1.617682] usbcore: registered new interface driver ums-usbat [ 1.618124] uinput result 0 , vmouse_init [ 1.619396] mousedev: PS/2 mouse device common for all mice [ 1.619883] sunxikbd_init failed. [ 1.619906] sunxikbd_init failed. [ 1.619929] ls_fetch_sysconfig_para: type err device_used = 0. [ 1.619947] =========script_get_err============ [ 1.619964] ltr_init: ls_fetch_sysconfig_para err. [ 1.620640] [RTC] WARNING: Rtc time will be wrong!! [ 1.620660] [RTC] WARNING: use *internal OSC* as clock source [ 1.621178] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 1.621278] i2c /dev entries driver [ 1.622105] sunxi cedar version 0.1 [ 1.622194] [cedar]: install start!!! [ 1.622572] [cedar]: install end!!! [ 1.622937] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.623154] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.623360] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.623563] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.623766] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.623968] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.624170] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.624395] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.624615] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.624861] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.625098] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.625336] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.625574] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.625811] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.626047] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.626283] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.626519] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.626755] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.626787] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 1.627131] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 1.627428] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 1.627455] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 1.627477] timeout_to_interv, line 167 [ 1.627495] interv_to_timeout, line 189 [ 1.627515] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 1.628373] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.628784] calibrat: max_cpufreq 1008Mhz Type 1! [ 1.628811] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 1.629444] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 4 2017 at 07:44:08 [ 1.629511] [mmc]: get mmc0's sdc_power is null! [ 1.629568] [mmc]: get mmc1's sdc_power is null! [ 1.629588] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.629607] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.629640] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 [ 1.634264] [mmc]: sdc0 power_supply is null [ 1.637021] no blue_led, ignore it! [ 1.637496] Registered led device: red_led [ 1.637729] Registered led device: green_led [ 1.637762] no led_0, ignore it! [ 1.637778] no led_1, ignore it! [ 1.637793] no led_2, ignore it! [ 1.637808] no led_3, ignore it! [ 1.637823] no led_4, ignore it! [ 1.637837] no led_5, ignore it! [ 1.637852] no led_6, ignore it! [ 1.637867] no led_7, ignore it! [ 1.639527] usbcore: registered new interface driver usbhid [ 1.639549] usbhid: USB HID core driver [ 1.648110] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.650473] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.650862] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.650896] [DAUDIO0] driver not init,just return. [ 1.657947] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 1.660733] oprofile: using arm/armv7-ca7 [ 1.661107] u32 classifier [ 1.661126] Performance counters on [ 1.661140] input device check on [ 1.661154] Actions configured [ 1.661798] TCP: bic registered [ 1.661819] TCP: cubic registered [ 1.661836] TCP: westwood registered [ 1.661852] TCP: highspeed registered [ 1.661868] TCP: hybla registered [ 1.661883] TCP: htcp registered [ 1.661899] TCP: vegas registered [ 1.661915] TCP: veno registered [ 1.661930] TCP: scalable registered [ 1.661947] TCP: lp registered [ 1.661962] TCP: yeah registered [ 1.661978] TCP: illinois registered [ 1.661993] Initializing XFRM netlink socket [ 1.662417] NET: Registered protocol family 10 [ 1.664561] NET: Registered protocol family 17 [ 1.664621] NET: Registered protocol family 15 [ 1.664728] Registering the dns_resolver key type [ 1.665911] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 1.665957] ThumbEE CPU extension supported. [ 1.665999] Registering SWP/SWPB emulation handler [ 1.667188] registered taskstats version 1 [ 1.668733] cmdline,disp= [ 1.669106] [DISP] disp_init_tv,line:539:screen 0 do not support TV TYPE! [ 1.669145] [DISP] bsp_disp_tv_register,line:998:'ptv is null [ 1.669167] tv registered!! [ 1.669244] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=11 [ 1.670606] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.673308] CPU Budget:corekeeper enabled [ 1.673854] CPU Budget:Register notifier [ 1.673880] CPU Budget:register Success [ 1.673906] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 1.680709] [rf_pm]: Did not config module_power1 in sys_config [ 1.680738] [rf_pm]: Did not config module_power2 in sys_config [ 1.680760] [rf_pm]: Did not config module_power3 in sys_config [ 1.680781] [rf_pm]: mod has no chip_en gpio [ 1.680799] [rf_pm]: regulator on. [ 1.680829] [rf_pm]: set losc_out 32k out[wifi_pm]: set wl_reg_on 1 ! [ 1.695864] ehci_irq: highspeed device connect [ 1.713717] mmc0: new high speed SDHC card at address b368 [ 1.714669] mmcblk0: mmc0:b368 USD 7.45 GiB [ 1.716758] mmcblk0: p1 [ 1.717883] mmcblk mmc0:b368: Card claimed for testing. [ 1.717913] mmc0:b368: USD 7.45 GiB [ 1.781441] hci: ERR: sunxi_ehci is already enable, can not enable again [ 1.781471] hci: ERR: sunxi_ohci is already enable, can not enable again [ 1.782994] [mmc]: sdc1 power_supply is null [ 1.840985] mmc1: new high speed SDIO card at address 0001 [ 1.881525] [wifi_pm]: wifi gpio init is OK !! [ 1.881636] [rfkill]: init no bt used in configuration [ 1.881656] ALSA device list: [ 1.881672] #0: audiocodec [ 1.881686] #1: sndhdmi [ 1.883455] Freeing init memory: 328K [ 1.970172] usb 2-1: new high-speed USB device number 2 using sunxi-ehci [ 2.639634] vmouse_input_dev_open [ 2.690435] vmouse_input_dev_close [ 3.142802] Btrfs loaded [ 3.595965] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 4.162532] systemd[1]: System time before build time, advancing clock. [ 4.750437] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.751075] systemd[1]: Detected architecture arm. [ 4.781102] systemd[1]: Set hostname to . [ 5.325797] systemd[1]: Listening on udev Control Socket. [ 5.350628] systemd[1]: Listening on udev Kernel Socket. [ 5.370381] systemd[1]: Reached target Swap. [ 5.390297] systemd[1]: Reached target Remote File Systems (Pre). [ 5.410611] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.430340] systemd[1]: Reached target Remote File Systems. [ 5.450342] systemd[1]: Reached target Encrypted Volumes. [ 5.471191] systemd[1]: Created slice User and Session Slice. [ 5.490741] systemd[1]: Listening on Journal Socket. [ 5.511018] systemd[1]: Created slice System Slice. [ 5.631235] systemd[1]: Starting Load Kernel Modules... [ 5.748005] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6498f40, ep1in-bulk) [ 5.748052] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6498f40, ep1in-bulk) [ 5.748080] ep_matches, wrn: endpoint already claimed, ep(0xc09791f8, 0xc6498f40, ep1out-bulk) [ 5.748104] gadget_is_softwinner_otg is not -int [ 5.748121] gadget_is_softwinner_otg is not -int [ 5.748159] g_serial gadget: Gadget Serial v2.4 [ 5.748193] g_serial gadget: g_serial ready [ 5.790858] systemd[1]: Starting Nameserver information manager... [ 5.810615] systemd[1]: Reached target Slices. [ 5.891112] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.911261] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.930895] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 5.951514] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.962558] [wifi_pm]: set wl_reg_on 1 ! [ 5.970483] bFWReady == _FALSE call reset 8051... [ 6.050676] systemd[1]: Mounting POSIX Message Queue File System... [ 6.071938] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.093428] systemd[1]: Listening on Journal Audit Socket. [ 6.221326] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.361192] systemd[1]: Starting Set console keymap... [ 6.450802] systemd[1]: Mounting Debug File System... [ 6.471007] systemd[1]: Listening on Syslog Socket. [ 6.490891] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.561268] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.651710] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.681228] systemd[1]: Starting Restore / save the current clock... [ 6.700973] systemd[1]: Reached target Paths. [ 6.720944] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.826626] systemd[1]: Mounted POSIX Message Queue File System. [ 6.850596] systemd[1]: Mounted Debug File System. [ 6.871236] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 6.980224] systemd[1]: Failed to start Load Kernel Modules. [ 7.020282] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 7.021596] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 7.500364] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.630260] systemd[1]: Started Set console keymap. [ 7.770339] systemd[1]: Started Remount Root and Kernel File Systems. [ 7.940249] systemd[1]: Started Restore / save the current clock. [ 8.191221] systemd[1]: Started Nameserver information manager. [ 8.288198] systemd[1]: Time has been changed [ 8.521059] systemd[1]: Reached target Network (Pre). [ 8.581425] systemd[1]: Starting udev Coldplug all Devices... [ 8.711289] systemd[1]: Starting Load/Save Random Seed... [ 8.791311] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.890731] systemd[1]: Mounting FUSE Control File System... [ 9.001192] systemd[1]: Starting Apply Kernel Variables... [ 9.039668] systemd[1]: Mounted FUSE Control File System. [ 9.650438] systemd[1]: Started Load/Save Random Seed. [ 9.830333] systemd[1]: Started Create Static Device Nodes in /dev. [ 9.980273] systemd[1]: Started Apply Kernel Variables. [ 10.160240] systemd[1]: Started udev Coldplug all Devices. [ 10.250855] systemd[1]: Reached target Local File Systems (Pre). [ 10.350553] systemd[1]: Mounting /tmp... [ 10.531359] systemd[1]: Starting udev Kernel Device Manager... [ 10.633438] systemd[1]: Mounted /tmp. [ 10.751498] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.771497] systemd[1]: Reached target Local File Systems. [ 10.891262] systemd[1]: Starting Raise network interfaces... [ 11.042041] systemd[1]: Starting Armbian enhanced Log2Ram... [ 11.231698] systemd[1]: Starting Set console font and keymap... [ 11.271817] cdc_ether 2-1:2.0: eth1: register 'cdc_ether' at usb-sunxi-ehci-1, CDC Ethernet Device, c0:74:2b:ff:e8:ff [ 11.272246] usbcore: registered new interface driver cdc_ether [ 11.301535] systemd[1]: Started udev Kernel Device Manager. [ 11.587787] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 11.587862] bmp085: probe of 0-0077 failed with error -70 [ 11.600719] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 11.601001] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 11.760640] systemd[1]: Started Armbian enhanced Log2Ram. [ 11.864489] vmouse_input_dev_open [ 11.910718] vmouse_input_dev_close [ 12.008442] systemd[1]: Found device /dev/ttyS0. [ 12.266602] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.371498] systemd[1]: Started ifup for eth0. [ 12.391746] systemd[1]: Reached target Sound Card. [ 12.551677] systemd[1]: Starting Journal Service... [ 12.721837] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.804511] systemd[1]: Started Journal Service. [ 13.082638] gmac0: probed [ 13.083134] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) [ 13.281409] systemd-journald[416]: Received request to flush runtime journal from PID 1 ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi-r1 BOARD_NAME="Orange Pi R1" VERSION=5.34 LINUXFAMILY=sun8i BRANCH=default ARCH=arm IMAGE_TYPE=user-built BOARD_TYPE=wip INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage ### boot environment: verbosity=1 console=both overlay_prefix=sun8i-h3 overlays=usbhost2 usbhost3 rootdev=UUID=20108e7f-a72e-47f3-9191-2bbb8b1c1eaa rootfstype=ext4 ### lsusb: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0bda:8152 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 CPU max MHz: 1008.0000 CPU min MHz: 240.0000 Hypervisor vendor: (null) Virtualization type: full ### cpuinfo: Processor : ARMv7 Processor rev 5 (v7l) processor : 0 BogoMIPS : 4800.00 processor : 1 BogoMIPS : 4800.00 processor : 2 BogoMIPS : 4800.00 processor : 3 BogoMIPS : 4800.00 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : sun8i Revision : 0000 Serial : 240078674610041a040e ### meminfo: MemTotal: 247696 kB MemFree: 158996 kB Buffers: 6764 kB Cached: 36980 kB SwapCached: 0 kB Active: 25136 kB Inactive: 33536 kB Active(anon): 15092 kB Inactive(anon): 1604 kB Active(file): 10044 kB Inactive(file): 31932 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 247696 kB LowFree: 158996 kB SwapTotal: 123840 kB SwapFree: 123840 kB Dirty: 12 kB Writeback: 0 kB AnonPages: 14808 kB Mapped: 10624 kB Shmem: 1776 kB Slab: 14404 kB SReclaimable: 5016 kB SUnreclaim: 9388 kB KernelStack: 936 kB PageTables: 516 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 247688 kB Committed_AS: 74732 kB VmallocTotal: 761856 kB VmallocUsed: 17528 kB VmallocChunk: 509004 kB ### ifconfig: eth0 Link encap:Ethernet HWaddr e2:fc:56:2f:d5:dc inet6 addr: fe80::e0fc:56ff:fe2f:d5dc/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:580 (580.0 B) Interrupt:114 lo Link encap:Local Loopback inet addr:XXX.XXX.0.1 Mask:XXX.XXX.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ### partitions: major minor #blocks name 179 0 7822336 mmcblk0 179 1 1417216 mmcblk0p1 ### df: Filesystem Size Used Avail Use% Mounted on udev 55M 0 55M 0% /dev tmpfs 25M 972K 24M 4% /run /dev/mmcblk0p1 1.4G 941M 394M 71% / tmpfs 121M 0 121M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 121M 0 121M 0% /sys/fs/cgroup tmpfs 121M 32K 121M 1% /tmp log2ram 50M 772K 50M 2% /var/log ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 ### /boot/script.bin --> bin/orangepi-r1.bin ### mmc0:b368 info: cid: 744a45555344202010d650026600d3ad csd: 400e00325b5900003bad7f800a4000c5 scr: 0235800000000000 date: 03/2013 name: USD type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x4a45 manfid: 0x000074 serial: 0xd6500266 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block erase_size: 512 ### quick iozone test: 4 837 844 8410 5256 5073 941 ### [firstrun] Recreated SSH keys (entropy: 1150 3391) ### [firstrun] Skipped swapfile creation since zram is available ### interrupts: CPU0 CPU1 CPU2 CPU3 29: 4101 3808 3695 3854 GIC arch_timer 30: 0 0 0 0 GIC arch_timer 32: 514 0 0 0 GIC uart0 38: 24 0 0 0 GIC twi0 39: 18 0 0 0 GIC twi1 43: 0 0 0 0 GIC PA 49: 0 0 0 0 GIC PG 50: 0 0 0 0 GIC sunxi_timer0 63: 0 0 0 0 GIC Thermal 72: 0 0 0 0 GIC sunxi-rtc alarm 77: 0 0 0 0 GIC PL 81: 0 0 0 0 GIC arisc_hwmsgbox_irq 82: 0 0 0 0 GIC sunxi_dmac 90: 0 0 0 0 GIC cedar_dev 92: 3129 84248 0 0 GIC sunxi-mmc 93: 1227 10063 0 0 GIC sunxi-mmc 97: 0 0 0 0 GIC spi0 98: 0 0 0 0 GIC spi1 104: 0 0 0 0 GIC ehci_hcd:usb1 105: 0 0 0 0 GIC ohci_hcd:usb5 106: 23 0 1186 0 GIC ehci_hcd:usb2 107: 0 0 0 0 GIC ohci_hcd:usb6 108: 0 0 0 0 GIC ehci_hcd:usb3 109: 0 0 0 0 GIC ohci_hcd:usb7 110: 0 0 0 0 GIC ehci_hcd:usb4 111: 0 0 0 0 GIC ohci_hcd:usb8 114: 4 0 0 0 GIC gmac0 119: 2458 0 0 0 GIC dispaly IPI0: 0 0 0 0 CPU wakeup interrupts IPI1: 0 0 0 0 Timer broadcast interrupts IPI2: 11286 6749 14461 12519 Rescheduling interrupts IPI3: 151 152 36 159 Function call interrupts IPI4: 3 5 3 2 Single function call interrupts IPI5: 0 0 0 0 CPU stop interrupts IPI6: 0 0 0 0 CPU backtrace IPI7: 0 0 0 0 completion interrupts Err: 0 ### shutdown: Linux 3.4.113-sun8i (orangepi) 11/04/2017 _armv7l_ (4 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 5.37 0.00 3.23 0.89 0.00 90.51 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn zram0 0.00 0.00 0.00 0 0 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 130640 9608 77560 0 0 88 9 262 400 5 3 91 1 0 total used free shared buff/cache available Mem: 241M 29M 127M 2.3M 85M 193M Swap: 120M 0B 120M [ 5.471191] systemd[1]: Created slice User and Session Slice. [ 5.490741] systemd[1]: Listening on Journal Socket. [ 5.511018] systemd[1]: Created slice System Slice. [ 5.631235] systemd[1]: Starting Load Kernel Modules... [ 5.748005] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6498f40, ep1in-bulk) [ 5.748052] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6498f40, ep1in-bulk) [ 5.748080] ep_matches, wrn: endpoint already claimed, ep(0xc09791f8, 0xc6498f40, ep1out-bulk) [ 5.748104] gadget_is_softwinner_otg is not -int [ 5.748121] gadget_is_softwinner_otg is not -int [ 5.748159] g_serial gadget: Gadget Serial v2.4 [ 5.748193] g_serial gadget: g_serial ready [ 5.790858] systemd[1]: Starting Nameserver information manager... [ 5.810615] systemd[1]: Reached target Slices. [ 5.891112] systemd[1]: Created slice system-serial-getty.slice. [ 5.911261] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.930895] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 5.951514] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.962558] [wifi_pm]: set wl_reg_on 1 ! [ 5.970483] bFWReady == _FALSE call reset 8051... [ 6.050676] systemd[1]: Mounting POSIX Message Queue File System... [ 6.071938] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.093428] systemd[1]: Listening on Journal Audit Socket. [ 6.221326] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.361192] systemd[1]: Starting Set console keymap... [ 6.450802] systemd[1]: Mounting Debug File System... [ 6.471007] systemd[1]: Listening on Syslog Socket. [ 6.490891] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.561268] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.651710] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.681228] systemd[1]: Starting Restore / save the current clock... [ 6.700973] systemd[1]: Reached target Paths. [ 6.720944] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.826626] systemd[1]: Mounted POSIX Message Queue File System. [ 6.850596] systemd[1]: Mounted Debug File System. [ 6.871236] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 6.980224] systemd[1]: Failed to start Load Kernel Modules. [ 7.020282] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 7.021596] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 7.500364] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.630260] systemd[1]: Started Set console keymap. [ 7.770339] systemd[1]: Started Remount Root and Kernel File Systems. [ 7.940249] systemd[1]: Started Restore / save the current clock. [ 8.191221] systemd[1]: Started Nameserver information manager. [ 8.288198] systemd[1]: Time has been changed [ 8.521059] systemd[1]: Reached target Network (Pre). [ 8.581425] systemd[1]: Starting udev Coldplug all Devices... [ 8.711289] systemd[1]: Starting Load/Save Random Seed... [ 8.791311] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.890731] systemd[1]: Mounting FUSE Control File System... [ 9.001192] systemd[1]: Starting Apply Kernel Variables... [ 9.039668] systemd[1]: Mounted FUSE Control File System. [ 9.650438] systemd[1]: Started Load/Save Random Seed. [ 9.830333] systemd[1]: Started Create Static Device Nodes in /dev. [ 9.980273] systemd[1]: Started Apply Kernel Variables. [ 10.160240] systemd[1]: Started udev Coldplug all Devices. [ 10.250855] systemd[1]: Reached target Local File Systems (Pre). [ 10.350553] systemd[1]: Mounting /tmp... [ 10.531359] systemd[1]: Starting udev Kernel Device Manager... [ 10.633438] systemd[1]: Mounted /tmp. [ 10.751498] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.771497] systemd[1]: Reached target Local File Systems. [ 10.891262] systemd[1]: Starting Raise network interfaces... [ 11.042041] systemd[1]: Starting Armbian enhanced Log2Ram... [ 11.231698] systemd[1]: Starting Set console font and keymap... [ 11.271817] cdc_ether 2-1:2.0: eth1: register 'cdc_ether' at usb-sunxi-ehci-1, CDC Ethernet Device, c0:74:2b:ff:e8:ff [ 11.272246] usbcore: registered new interface driver cdc_ether [ 11.301535] systemd[1]: Started udev Kernel Device Manager. [ 11.587787] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 11.587862] bmp085: probe of 0-0077 failed with error -70 [ 11.600719] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 11.601001] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 11.760640] systemd[1]: Started Armbian enhanced Log2Ram. [ 11.864489] vmouse_input_dev_open [ 11.910718] vmouse_input_dev_close [ 12.008442] systemd[1]: Found device /dev/ttyS0. [ 12.266602] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.371498] systemd[1]: Started ifup for eth0. [ 12.391746] systemd[1]: Reached target Sound Card. [ 12.551677] systemd[1]: Starting Journal Service... [ 12.721837] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.804511] systemd[1]: Started Journal Service. [ 13.082638] gmac0: probed [ 13.083134] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) [ 13.281409] systemd-journald[416]: Received request to flush runtime journal from PID 1 [ 18.133071] mmc1: card 0001 removed [ 18.133568] [mmc]: sdc1 power_supply is null [ 18.264491] [wifi_pm]: set wl_reg_on 0 ! [ 18.365916] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 18.378581] zram: Creating 4 devices ... [ 18.391929] [mmc]: sdc1 power_supply is null [ 18.458462] mmc1: new high speed SDIO card at address 0001 [ 18.616568] [wifi_pm]: set wl_reg_on 1 ! [ 18.639890] bFWReady == _FALSE call reset 8051... [ 18.768708] Adding 30960k swap on /dev/zram0. Priority:5 extents:1 across:30960k SS [ 18.876224] Adding 30960k swap on /dev/zram1. Priority:5 extents:1 across:30960k SS [ 19.025130] Adding 30960k swap on /dev/zram2. Priority:5 extents:1 across:30960k SS [ 19.134816] Adding 30960k swap on /dev/zram3. Priority:5 extents:1 across:30960k SS [ 23.310319] ==> rtl8188e_iol_efuse_patch [ 23.547115] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.970063] eth0: no IPv6 routers present Sat Nov 4 15:23:22 UTC 2017 | Orange Pi R1 | 5.34 | armhf | armv7l | 3.4.113-sun8i ### [resize2fs] 8GB media so leaving 2 percent spare area. Start resizing partition /dev/mmcblk0p1 now: major minor #blocks name 179 0 7822336 mmcblk0 179 1 7661792 mmcblk0p1 Executing fdisk, fsck and partprobe: Welcome to fdisk (util-linux 2.27.1). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. Command (m for help): Selected partition 1 Partition 1 has been deleted. Command (m for help): Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): Partition number (1-4, default 1): First sector (2048-15644671, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (8192-15644671, default 15644671): Created a new partition 1 of type 'Linux' and of size 7.3 GiB. Command (m for help): Re-reading the partition table failed.: Device or resource busy The partition table has been altered. Calling ioctl() to re-read partition table. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8). New partition table: major minor #blocks name 179 0 7822336 mmcblk0 179 1 7661792 mmcblk0p1 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits: resize2fs 1.42.13 (17-May-2015) Filesystem at /dev/mmcblk0p1 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 1 The filesystem on /dev/mmcblk0p1 is now 1915448 (4k) blocks long. ### [resize2fs] Start resizing ext4 partition /dev/mmcblk0p1 now resize2fs 1.42.13 (17-May-2015) The filesystem is already 1915448 (4k) blocks long. Nothing to do! Sat Nov 4 15:23:35 UTC 2017 | Orange Pi R1 | 5.34 | armhf | armv7l | 3.4.113-sun8i ### dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #13 SMP PREEMPT Sat Nov 4 07:45:43 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun8i [ 0.000000] cma: dma_declare_contiguous(266): ION reserve size should be 4m align! adjust size to 128MBytes [ 0.000000] cma: CMA: reserved 128 MiB at 48000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c098f5c0, node_mem_map c0ac8000 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64960 pages, LIFO batch:15 [ 0.000000] script_init enter! [ 0.000000] script_init exit! [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d19000 s11968 r8192 d12608 u32768 [ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: root=UUID=20108e7f-a72e-47f3-9191-2bbb8b1c1eaa rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=5c5eed3d-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 111248k/111248k available, 150896k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d08ac (8995 kB) [ 0.000000] .init : 0xc08d1000 - 0xc0923ec0 ( 332 kB) [ 0.000000] .data : 0xc0924000 - 0xc0993e30 ( 448 kB) [ 0.000000] .bss : 0xc09945e4 - 0xc0ac7a00 (1230 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000494] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.000542] pid_max: default: 32768 minimum: 301 [ 0.000858] Security Framework initialized [ 0.000906] AppArmor: AppArmor disabled by boot time parameter [ 0.001280] Mount-cache hash table entries: 512 [ 0.003268] Initializing cgroup subsys cpuacct [ 0.003299] Initializing cgroup subsys memory [ 0.003391] Initializing cgroup subsys devices [ 0.003418] Initializing cgroup subsys freezer [ 0.003442] Initializing cgroup subsys blkio [ 0.003489] Initializing cgroup subsys perf_event [ 0.003654] CPU: Testing write buffer coherency: ok [ 0.003749] ftrace: allocating 24834 entries in 73 pages [ 0.060562] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060594] [sunxi_smp_prepare_cpus] enter [ 0.060668] Setting up static identity map for 0x4061edd8 - 0x4061ee30 [ 0.062555] CPU1: Booted secondary processor [ 0.062555] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.070730] CPU2: Booted secondary processor [ 0.070730] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.070944] CPU3: Booted secondary processor [ 0.070944] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.080355] Brought up 4 CPUs [ 0.080389] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.081800] devtmpfs: initialized [ 0.096716] wakeup src cnt is : 2. [ 0.096740] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.096763] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0 [ 0.096786] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.096809] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 [ 0.096831] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8 [ 0.096853] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 [ 0.096876] sunxi pm init [ 0.097162] pinctrl core: initialized pinctrl subsystem [ 0.107600] NET: Registered protocol family 16 [ 0.109629] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.109629] script_sysfs_init success [ 0.109629] sunxi_dump_init success [ 0.109629] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.109629] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.109629] plat: add bmp085 device [ 0.109629] plat: add pcf8591 device [ 0.110078] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.110105] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110493] script config pll_video to 297 Mhz [ 0.110526] script config pll_de to 864 Mhz [ 0.110588] script config pll_ve to 402 Mhz [ 0.110617] sunxi_default_clk_init [ 0.110632] try to set pll6ahb1 to 200000000 [ 0.110671] try to set ahb clk source to pll6ahb1 [ 0.110688] set ahb clk source to pll6ahb1 [ 0.110707] try to set ahb1 to 200000000 [ 0.110729] try to set apb1 to 100000000 [ 0.130462] bio: create slab at 0 [ 0.130640] [ARISC] :sunxi-arisc driver v1.04 [ 0.148014] [ARISC] :arisc version: [v0.1.58] [ 0.256930] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.260902] SCSI subsystem initialized [ 0.261304] usbcore: registered new interface driver usbfs [ 0.261458] usbcore: registered new interface driver hub [ 0.261512] usbcore: registered new device driver usb [ 0.261512] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.261512] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.261512] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.261873] Linux video capture interface: v2.00 [ 0.262358] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.263877] cfg80211: Calling CRDA to update world regulatory domain [ 0.270071] NetLabel: Initializing [ 0.270071] NetLabel: domain hash size = 128 [ 0.270077] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.270181] NetLabel: unlabeled traffic allowed by default [ 0.271228] Switching to clocksource arch_sys_counter [ 0.297218] FS-Cache: Loaded [ 0.297782] CacheFiles: Loaded [ 0.321456] NET: Registered protocol family 2 [ 0.344932] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.346009] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.346291] TCP bind hash table entries: 8192 (order: 4, 98304 bytes) [ 0.346591] TCP: Hash tables configured (established 8192 bind 8192) [ 0.346613] TCP: reno registered [ 0.346636] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.346696] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.347370] NET: Registered protocol family 1 [ 0.348198] RPC: Registered named UNIX socket transport module. [ 0.348224] RPC: Registered udp transport module. [ 0.348241] RPC: Registered tcp transport module. [ 0.348258] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.348658] Trying to unpack rootfs image as initramfs... [ 1.037640] Freeing initrd memory: 5048K [ 1.038925] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 1.039168] sunxi_reg_init enter [ 1.041091] audit: initializing netlink socket (disabled) [ 1.041193] type=2000 audit(1.040:1): initialized [ 1.043956] VFS: Disk quotas dquot_6.5.2 [ 1.044348] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.045481] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.045856] misc fatfs initialized [ 1.046301] NFS: Registering the id_resolver key type [ 1.047093] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.047121] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.048628] NTFS driver 2.1.30 [Flags: R/W]. [ 1.049233] fuse init (API version 7.18) [ 1.050150] msgmni has been set to 483 [ 1.053120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.053160] io scheduler noop registered [ 1.053179] io scheduler deadline registered [ 1.053305] io scheduler cfq registered (default) [ 1.054129] [DISP]disp_module_init [ 1.054745] cmdline,init_disp= [ 1.054808] cmdline,disp= [ 1.063462] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! [ 1.079531] Console: switching to colour frame buffer device 90x36 [ 1.098068] [DISP]disp_module_init finish [ 1.098523] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 1.098557] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. [ 1.098586] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. [ 1.099529] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 1.099556] sw_uart_pm()890 - uart0 clk is already enable [ 1.099594] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 1.099880] console [ttyS0] enabled [ 1.100613] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 1.101153] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 1.102226] sunxi_cmatest_init enter [ 1.102312] sunxi_cmatest_init success [ 1.110865] brd: module loaded [ 1.119093] loop: module loaded [ 1.119632] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 1.119662] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 1.121055] spi spi0: master is unqueued, this is deprecated [ 1.122275] spi spi1: master is unqueued, this is deprecated [ 1.124261] PPP generic driver version 2.4.2 [ 1.124634] PPP BSD Compression module registered [ 1.124656] PPP Deflate Compression module registered [ 1.129591] PPP MPPE Compression module registered [ 1.129628] NET: Registered protocol family 24 [ 1.129772] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.149972] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.150074] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 1.151029] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 1.170082] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 1.171338] hub 1-0:1.0: USB hub found [ 1.171384] hub 1-0:1.0: 1 port detected [ 1.192150] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.192209] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 1.192982] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 1.210067] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 1.211143] hub 2-0:1.0: USB hub found [ 1.211198] hub 2-0:1.0: 1 port detected [ 1.231963] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.232025] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 1.232777] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 1.250065] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 1.251147] hub 3-0:1.0: USB hub found [ 1.251197] hub 3-0:1.0: 1 port detected [ 1.271958] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272016] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 1.272803] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 1.290087] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 1.291194] hub 4-0:1.0: USB hub found [ 1.291242] hub 4-0:1.0: 1 port detected [ 1.292042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.312178] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.312237] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 1.312302] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 1.375155] hub 5-0:1.0: USB hub found [ 1.375194] hub 5-0:1.0: 1 port detected [ 1.395963] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.396023] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 1.396084] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 1.455177] hub 6-0:1.0: USB hub found [ 1.455223] hub 6-0:1.0: 1 port detected [ 1.476125] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.476183] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 1.476246] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 1.535065] hub 7-0:1.0: USB hub found [ 1.535105] hub 7-0:1.0: 1 port detected [ 1.555815] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.555873] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 1.555937] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 1.615043] hub 8-0:1.0: USB hub found [ 1.615081] hub 8-0:1.0: 1 port detected [ 1.615773] Initializing USB Mass Storage driver... [ 1.616240] usbcore: registered new interface driver usb-storage [ 1.616261] USB Mass Storage support registered. [ 1.616372] usbcore: registered new interface driver ums-alauda [ 1.616498] usbcore: registered new interface driver ums-cypress [ 1.616618] usbcore: registered new interface driver ums-datafab [ 1.616714] usbcore: registered new interface driver ums_eneub6250 [ 1.616813] usbcore: registered new interface driver ums-freecom [ 1.616916] usbcore: registered new interface driver ums-isd200 [ 1.617012] usbcore: registered new interface driver ums-jumpshot [ 1.617110] usbcore: registered new interface driver ums-karma [ 1.617207] usbcore: registered new interface driver ums-onetouch [ 1.617334] usbcore: registered new interface driver ums-realtek [ 1.617441] usbcore: registered new interface driver ums-sddr09 [ 1.617549] usbcore: registered new interface driver ums-sddr55 [ 1.617648] usbcore: registered new interface driver ums-usbat [ 1.618095] uinput result 0 , vmouse_init [ 1.619359] mousedev: PS/2 mouse device common for all mice [ 1.619839] sunxikbd_init failed. [ 1.619863] sunxikbd_init failed. [ 1.619886] ls_fetch_sysconfig_para: type err device_used = 0. [ 1.619904] =========script_get_err============ [ 1.619921] ltr_init: ls_fetch_sysconfig_para err. [ 1.620592] [RTC] WARNING: Rtc time will be wrong!! [ 1.620613] [RTC] WARNING: use *internal OSC* as clock source [ 1.621130] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 1.621231] i2c /dev entries driver [ 1.622055] sunxi cedar version 0.1 [ 1.622144] [cedar]: install start!!! [ 1.622522] [cedar]: install end!!! [ 1.622890] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.623107] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.623312] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.623515] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.623717] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.623921] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.624122] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.624349] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.624568] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.624816] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.625053] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.625290] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.625526] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.625763] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.626000] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.626235] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.626472] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.626708] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.626740] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 1.627085] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 1.627388] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 1.627415] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 1.627437] timeout_to_interv, line 167 [ 1.627454] interv_to_timeout, line 189 [ 1.627474] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 1.628342] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.628744] calibrat: max_cpufreq 1008Mhz Type 1! [ 1.628771] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 1.629400] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 4 2017 at 07:44:08 [ 1.629469] [mmc]: get mmc0's sdc_power is null! [ 1.629526] [mmc]: get mmc1's sdc_power is null! [ 1.629545] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.629565] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.629598] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 [ 1.634202] [mmc]: sdc0 power_supply is null [ 1.636950] no blue_led, ignore it! [ 1.637418] Registered led device: red_led [ 1.637649] Registered led device: green_led [ 1.637682] no led_0, ignore it! [ 1.637699] no led_1, ignore it! [ 1.637714] no led_2, ignore it! [ 1.637729] no led_3, ignore it! [ 1.637743] no led_4, ignore it! [ 1.637758] no led_5, ignore it! [ 1.637773] no led_6, ignore it! [ 1.637788] no led_7, ignore it! [ 1.639448] usbcore: registered new interface driver usbhid [ 1.639471] usbhid: USB HID core driver [ 1.648052] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.650392] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.650775] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.650804] [DAUDIO0] driver not init,just return. [ 1.657863] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 1.660630] oprofile: using arm/armv7-ca7 [ 1.661000] u32 classifier [ 1.661019] Performance counters on [ 1.661035] input device check on [ 1.661050] Actions configured [ 1.661694] TCP: bic registered [ 1.661715] TCP: cubic registered [ 1.661731] TCP: westwood registered [ 1.661748] TCP: highspeed registered [ 1.661764] TCP: hybla registered [ 1.661780] TCP: htcp registered [ 1.661795] TCP: vegas registered [ 1.661811] TCP: veno registered [ 1.661827] TCP: scalable registered [ 1.661843] TCP: lp registered [ 1.661858] TCP: yeah registered [ 1.661874] TCP: illinois registered [ 1.661890] Initializing XFRM netlink socket [ 1.662310] NET: Registered protocol family 10 [ 1.664436] NET: Registered protocol family 17 [ 1.664497] NET: Registered protocol family 15 [ 1.664603] Registering the dns_resolver key type [ 1.665773] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 1.665818] ThumbEE CPU extension supported. [ 1.665859] Registering SWP/SWPB emulation handler [ 1.667048] registered taskstats version 1 [ 1.668600] cmdline,disp= [ 1.668974] [DISP] disp_init_tv,line:539:screen 0 do not support TV TYPE! [ 1.669012] [DISP] bsp_disp_tv_register,line:998:'ptv is null [ 1.669035] tv registered!! [ 1.669109] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=11 [ 1.670607] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.673320] CPU Budget:corekeeper enabled [ 1.673875] CPU Budget:Register notifier [ 1.673900] CPU Budget:register Success [ 1.673926] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 1.680731] [rf_pm]: Did not config module_power1 in sys_config [ 1.680761] [rf_pm]: Did not config module_power2 in sys_config [ 1.680783] [rf_pm]: Did not config module_power3 in sys_config [ 1.680804] [rf_pm]: mod has no chip_en gpio [ 1.680822] [rf_pm]: regulator on. [ 1.680851] [rf_pm]: set losc_out 32k out[wifi_pm]: set wl_reg_on 1 ! [ 1.696580] ehci_irq: highspeed device connect [ 1.713708] mmc0: new high speed SDHC card at address b368 [ 1.714672] mmcblk0: mmc0:b368 USD 7.45 GiB [ 1.716904] mmcblk0: p1 [ 1.718036] mmcblk mmc0:b368: Card claimed for testing. [ 1.718066] mmc0:b368: USD 7.45 GiB [ 1.781446] hci: ERR: sunxi_ehci is already enable, can not enable again [ 1.781474] hci: ERR: sunxi_ohci is already enable, can not enable again [ 1.783011] [mmc]: sdc1 power_supply is null [ 1.840076] mmc1: new high speed SDIO card at address 0001 [ 1.881575] [wifi_pm]: wifi gpio init is OK !! [ 1.881686] [rfkill]: init no bt used in configuration [ 1.881710] ALSA device list: [ 1.881725] #0: audiocodec [ 1.881740] #1: sndhdmi [ 1.883507] Freeing init memory: 328K [ 1.970187] usb 2-1: new high-speed USB device number 2 using sunxi-ehci [ 2.635418] vmouse_input_dev_open [ 2.690284] vmouse_input_dev_close [ 3.002593] Btrfs loaded [ 3.438764] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 4.042464] systemd[1]: System time before build time, advancing clock. [ 4.580566] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.581207] systemd[1]: Detected architecture arm. [ 4.611398] systemd[1]: Set hostname to . [ 5.170985] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.190429] systemd[1]: Reached target Encrypted Volumes. [ 5.210328] systemd[1]: Reached target Remote File Systems (Pre). [ 5.230736] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.250615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.271259] systemd[1]: Created slice System Slice. [ 5.291109] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.310356] systemd[1]: Reached target Swap. [ 5.330714] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 5.351576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.370633] systemd[1]: Listening on udev Kernel Socket. [ 5.390760] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.410955] systemd[1]: Listening on Journal Audit Socket. [ 5.430373] systemd[1]: Reached target Remote File Systems. [ 5.450979] systemd[1]: Created slice User and Session Slice. [ 5.470364] systemd[1]: Reached target Slices. [ 5.490325] systemd[1]: Reached target Paths. [ 5.510538] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.530475] systemd[1]: Listening on Syslog Socket. [ 5.550599] systemd[1]: Listening on udev Control Socket. [ 5.570668] systemd[1]: Listening on Journal Socket. [ 5.671241] systemd[1]: Starting Load Kernel Modules... [ 5.788430] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6b033c0, ep1in-bulk) [ 5.788474] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6b033c0, ep1in-bulk) [ 5.788504] ep_matches, wrn: endpoint already claimed, ep(0xc09791f8, 0xc6b033c0, ep1out-bulk) [ 5.788527] gadget_is_softwinner_otg is not -int [ 5.788543] gadget_is_softwinner_otg is not -int [ 5.788580] g_serial gadget: Gadget Serial v2.4 [ 5.788612] g_serial gadget: g_serial ready [ 5.830697] systemd[1]: Mounting Debug File System... [ 5.991332] systemd[1]: Starting Set console keymap... [ 6.002593] [wifi_pm]: set wl_reg_on 1 ! [ 6.010901] bFWReady == _FALSE call reset 8051... [ 6.111484] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.230753] systemd[1]: Starting Nameserver information manager... [ 6.351371] systemd[1]: Starting Restore / save the current clock... [ 6.490649] systemd[1]: Mounting POSIX Message Queue File System... [ 6.621225] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.715110] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.736600] systemd[1]: Mounted POSIX Message Queue File System. [ 6.760623] systemd[1]: Mounted Debug File System. [ 6.781274] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 6.950205] systemd[1]: Failed to start Load Kernel Modules. [ 6.990275] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 6.991570] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 7.130261] systemd[1]: Started Set console keymap. [ 7.300255] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.730358] systemd[1]: Started Restore / save the current clock. [ 7.900283] systemd[1]: Started Remount Root and Kernel File Systems. [ 8.121085] systemd[1]: Started Nameserver information manager. [ 8.218117] systemd[1]: Time has been changed [ 8.449663] systemd[1]: Reached target Network (Pre). [ 8.551151] systemd[1]: Starting Load/Save Random Seed... [ 8.691206] systemd[1]: Starting udev Coldplug all Devices... [ 8.881336] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.980813] systemd[1]: Mounting FUSE Control File System... [ 9.081127] systemd[1]: Starting Apply Kernel Variables... [ 9.119763] systemd[1]: Mounted FUSE Control File System. [ 9.390285] systemd[1]: Started Load/Save Random Seed. [ 9.930469] systemd[1]: Started Create Static Device Nodes in /dev. [ 10.100302] systemd[1]: Started Apply Kernel Variables. [ 10.230249] systemd[1]: Started udev Coldplug all Devices. [ 10.391402] systemd[1]: Starting udev Kernel Device Manager... [ 10.410374] systemd[1]: Reached target Local File Systems (Pre). [ 10.560676] systemd[1]: Mounting /tmp... [ 10.649272] systemd[1]: Started udev Kernel Device Manager. [ 10.669179] systemd[1]: Mounted /tmp. [ 10.751500] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.771744] systemd[1]: Reached target Local File Systems. [ 10.880960] systemd[1]: Starting Raise network interfaces... [ 11.011960] systemd[1]: Starting Armbian enhanced Log2Ram... [ 11.162764] systemd[1]: Starting Set console font and keymap... [ 11.214506] cdc_ether 2-1:2.0: eth1: register 'cdc_ether' at usb-sunxi-ehci-1, CDC Ethernet Device, c0:74:2b:ff:e8:ff [ 11.214894] usbcore: registered new interface driver cdc_ether [ 11.527640] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 11.527722] bmp085: probe of 0-0077 failed with error -70 [ 11.546214] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 11.550322] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 11.650947] systemd[1]: Started Armbian enhanced Log2Ram. [ 11.782812] systemd[1]: Found device /dev/ttyS0. [ 11.839159] vmouse_input_dev_open [ 11.875334] vmouse_input_dev_close [ 11.875399] systemd[1]: Reached target Sound Card. [ 11.971703] systemd[1]: Starting Journal Service... [ 12.076421] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.221656] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.331092] systemd[1]: Started Journal Service. [ 12.939204] systemd-journald[360]: Received request to flush runtime journal from PID 1 [ 24.556913] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 24.558470] zram: Creating 4 devices ... [ 24.676263] Adding 30960k swap on /dev/zram0. Priority:5 extents:1 across:30960k SS [ 24.723301] Adding 30960k swap on /dev/zram1. Priority:5 extents:1 across:30960k SS [ 24.765547] Adding 30960k swap on /dev/zram2. Priority:5 extents:1 across:30960k SS [ 24.807610] Adding 30960k swap on /dev/zram3. Priority:5 extents:1 across:30960k SS [ 25.936397] gmac0: probed [ 25.936874] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi-r1 BOARD_NAME="Orange Pi R1" VERSION=5.34 LINUXFAMILY=sun8i BRANCH=default ARCH=arm IMAGE_TYPE=user-built BOARD_TYPE=wip INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage ### boot environment: verbosity=1 console=both overlay_prefix=sun8i-h3 overlays=usbhost2 usbhost3 rootdev=UUID=20108e7f-a72e-47f3-9191-2bbb8b1c1eaa rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0bda:8152 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 CPU max MHz: 1008.0000 CPU min MHz: 240.0000 Hypervisor vendor: (null) Virtualization type: full ### cpuinfo: Processor : ARMv7 Processor rev 5 (v7l) processor : 0 BogoMIPS : 10080.00 processor : 1 BogoMIPS : 10080.00 processor : 2 BogoMIPS : 10080.00 processor : 3 BogoMIPS : 10080.00 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : sun8i Revision : 0000 Serial : 240078674610041a040e ### meminfo: MemTotal: 247696 kB MemFree: 128824 kB Buffers: 8300 kB Cached: 59864 kB SwapCached: 0 kB Active: 35460 kB Inactive: 52748 kB Active(anon): 20644 kB Inactive(anon): 1840 kB Active(file): 14816 kB Inactive(file): 50908 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 247696 kB LowFree: 128824 kB SwapTotal: 123840 kB SwapFree: 123840 kB Dirty: 12 kB Writeback: 0 kB AnonPages: 20164 kB Mapped: 13968 kB Shmem: 2236 kB Slab: 15076 kB SReclaimable: 5612 kB SUnreclaim: 9464 kB KernelStack: 840 kB PageTables: 552 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 247688 kB Committed_AS: 131444 kB VmallocTotal: 761856 kB VmallocUsed: 17528 kB VmallocChunk: 509004 kB ### ifconfig: enxc0742bffe8ff Link encap:Ethernet HWaddr c0:74:2b:ff:e8:ff UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3107 (3.1 KB) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e2:fc:56:2f:d5:dc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:238 (238.0 B) Interrupt:114 lo Link encap:Local Loopback inet addr:XXX.XXX.0.1 Mask:XXX.XXX.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 08:ea:40:7c:02:ad UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ### partitions: major minor #blocks name 179 0 7822336 mmcblk0 179 1 7661792 mmcblk0p1 ### df: Filesystem Size Used Avail Use% Mounted on udev 55M 0 55M 0% /dev tmpfs 25M 976K 24M 4% /run /dev/mmcblk0p1 7.2G 943M 6.2G 13% / tmpfs 121M 0 121M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 121M 0 121M 0% /sys/fs/cgroup tmpfs 121M 32K 121M 1% /tmp log2ram 50M 1.3M 49M 3% /var/log ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,nodiratime,errors=remount-ro,commit=600 0 0 ### /boot/script.bin --> bin/orangepi-r1.bin ### mmc0:b368 info: cid: 744a45555344202010d650026600d3ad csd: 400e00325b5900003bad7f800a4000c5 scr: 0235800000000000 date: 03/2013 name: USD type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x4a45 manfid: 0x000074 serial: 0xd6500266 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block erase_size: 512 ### interrupts: CPU0 CPU1 CPU2 CPU3 29: 3979 3674 3512 3946 GIC arch_timer 30: 0 0 0 0 GIC arch_timer 32: 591 0 0 0 GIC uart0 38: 24 0 0 0 GIC twi0 39: 18 0 0 0 GIC twi1 43: 0 0 0 0 GIC PA 49: 0 0 0 0 GIC PG 50: 0 0 0 0 GIC sunxi_timer0 63: 0 0 0 0 GIC Thermal 72: 0 0 0 0 GIC sunxi-rtc alarm 77: 0 0 0 0 GIC PL 81: 0 0 0 0 GIC arisc_hwmsgbox_irq 82: 0 0 0 0 GIC sunxi_dmac 90: 0 0 0 0 GIC cedar_dev 92: 5218 29321 0 0 GIC sunxi-mmc 93: 2037 10455 0 0 GIC sunxi-mmc 97: 0 0 0 0 GIC spi0 98: 0 0 0 0 GIC spi1 104: 0 0 0 0 GIC ehci_hcd:usb1 105: 0 0 0 0 GIC ohci_hcd:usb5 106: 23 0 1262 0 GIC ehci_hcd:usb2 107: 0 0 0 0 GIC ohci_hcd:usb6 108: 0 0 0 0 GIC ehci_hcd:usb3 109: 0 0 0 0 GIC ohci_hcd:usb7 110: 0 0 0 0 GIC ehci_hcd:usb4 111: 0 0 0 0 GIC ohci_hcd:usb8 114: 3 0 0 0 GIC gmac0 119: 2962 0 0 0 GIC dispaly IPI0: 0 0 0 0 CPU wakeup interrupts IPI1: 0 0 0 0 Timer broadcast interrupts IPI2: 5316 6019 5749 4613 Rescheduling interrupts IPI3: 164 156 62 162 Function call interrupts IPI4: 21 9 15 8 Single function call interrupts IPI5: 0 0 0 0 CPU stop interrupts IPI6: 0 0 0 0 CPU backtrace IPI7: 0 0 0 0 completion interrupts Err: 0 ### lsusb: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0bda:8152 Realtek Semiconductor Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M |__ Port 1: Dev 2, If 0, Class=Communications, Driver=cdc_ether, 480M |__ Port 1: Dev 2, If 1, Class=CDC Data, Driver=cdc_ether, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M ### Installed packages: ii armbian-firmware 5.34 all Linux firmware ii armbian-tools-xenial 5.34 armhf Armbian tools, temper, Cubie bt utils ii hostapd 2:2.6-4~armbian5.34.171017+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii linux-base 4.0ubuntu1 all Linux image base package ii linux-firmware 1.157.13 all Firmware for Linux kernel drivers ii linux-image-sun8i 5.34 armhf Linux kernel, version 3.4.113-sun8i ii linux-libc-dev:armhf 4.4.0-98.121 armhf Linux Kernel Headers for development ii linux-u-boot-orangepi-r1-default 5.34 armhf Uboot loader 2017.09 ii linux-xenial-root-orangepi-r1 5.34 armhf Armbian tweaks for xenial on orangepi-r1 (default branch) ii sunxi-tools 1.4.2-1~armbian5.34.171017+1 armhf tools for working with Allwinner (sunxi) ARM processors ### fex settings: lrwxrwxrwx 1 root root 19 Nov 4 14:48 /boot/script.bin -> bin/orangepi-r1.bin [product] version = "100" machine = "Xunlong Orange Pi R1" [platform] debug_mode = 1 eraseflag = 1 next_work = 3 secure_without_OS = 1 [target] boot_clock = 1008 storage_type = -1 burn_key = 1 [key_detect_en] keyen_flag = 0 [fel_key] fel_key_max = 7 fel_key_min = 2 [card_boot] logical_start = 40960 sprite_work_delay = 500 sprite_err_delay = 200 sprite_gpio0 = port:PA17<1> next_work = 3 [box_start_os] used = 1 start_type = 1 irkey_used = 1 pmukey_used = 0 pmukey_num = 0 led_power = 0 led_state = 0 [boot_init_gpio] used = 1 gpio0 = port:PL10<1><1> gpio1 = port:PA17<1><0> [recovery_para] used = 1 mode = 2 recovery_key = port:PL04<0> [pm_para] standby_mode = 1 [card0_boot_para] card_ctrl = 0 card_high_speed = 1 card_line = 4 sdc_d1 = port:PF00<2><1><2> sdc_d0 = port:PF01<2><1><2> sdc_clk = port:PF02<2><1><2> sdc_cmd = port:PF03<2><1><2> sdc_d3 = port:PF04<2><1><2> sdc_d2 = port:PF05<2><1><2> [card2_boot_para] card_ctrl = 2 card_high_speed = 1 card_line = 8 sdc_cmd = port:PC06<3><1><2> sdc_clk = port:PC05<3><1><2> sdc_d0 = port:PC08<3><1><2> sdc_d1 = port:PC09<3><1><2> sdc_d2 = port:PC10<3><1><2> sdc_d3 = port:PC11<3><1><2> sdc_d4 = port:PC12<3><1><2> sdc_d5 = port:PC13<3><1><2> sdc_d6 = port:PC14<3><1><2> sdc_d7 = port:PC15<3><1><2> sdc_2xmode = 1 sdc_ddrmode = 1 [twi_para] twi_port = 0 twi_scl = port:PA11<2> twi_sda = port:PA12<2> [uart_para] uart_debug_port = 0 uart_debug_tx = port:PA04<2><1> uart_debug_rx = port:PA05<2><1> [force_uart_para] force_uart_port = 0 force_uart_tx = force_uart_rx = [jtag_para] jtag_enable = 0 jtag_ms = port:PA00<3> jtag_ck = port:PA01<3> jtag_do = port:PA02<3> jtag_di = port:PA03<3> [clock] pll_video = 297 pll_ve = 402 pll_periph0 = 600 pll_gpu = 576 pll_periph1 = 600 pll_de = 864 [dram_para] dram_clk = 408 dram_type = 3 dram_zq = 0x3b3bfb dram_odt_en = 1 dram_para1 = 283377664 dram_para2 = 0 dram_mr0 = 6208 dram_mr1 = 64 dram_mr2 = 24 dram_mr3 = 2 dram_tpr0 = 0x48a192 dram_tpr1 = 0x1c2418d dram_tpr2 = 0x76051 dram_tpr3 = 0x0 dram_tpr4 = 0x0 dram_tpr5 = 0x0 dram_tpr6 = 0x64 dram_tpr7 = 0x13890240 dram_tpr8 = 0x0 dram_tpr9 = 0x0 dram_tpr10 = 0x0 dram_tpr11 = 0x6aaa0000 dram_tpr12 = 0x7979 dram_tpr13 = 0x1802800 [wakeup_src_para] cpu_en = 0 cpu_freq = 48 pll_ratio = 273 dram_selfresh_en = 1 dram_freq = 36 wakeup_src0 = wakeup_src_wl = port:PG10<4><0> wakeup_src_bt = port:PL03<6><0> [twi0] twi_used = 1 twi_scl = port:PA11<2> twi_sda = port:PA12<2> [twi1] twi_used = 1 twi_scl = port:PA18<3> twi_sda = port:PA19<3> [twi2] twi_used = 0 twi_scl = port:PE12<3> twi_sda = port:PE13<3> [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PA04<2><1> uart_rx = port:PA05<2><1> [uart1] uart_used = 1 uart_port = 1 uart_type = 2 uart_tx = port:PG06<2><1> uart_rx = port:PG07<2><1> [uart2] uart_used = 1 uart_port = 2 uart_type = 2 uart_tx = port:PA00<2><1> uart_rx = port:PA01<2><1> [uart3] uart_used = 0 uart_port = 3 uart_type = 2 uart_tx = port:PA13<3><1> uart_rx = port:PA14<3><1> [spi0] spi_used = 1 spi_cs_bitmap = 1 spi_mosi = port:PC00<3> spi_miso = port:PC01<3> spi_sclk = port:PC02<3> spi_cs0 = port:PC03<3><1> [spi1] spi_used = 1 spi_cs_bitmap = 1 spi_cs0 = port:PA13<2><1> spi_sclk = port:PA14<2> spi_mosi = port:PA15<2> spi_miso = port:PA16<2> [spi_devices] spi_dev_num = 2 [spi_board0] modalias = "spidev" max_speed_hz = 33000000 bus_num = 0 chip_select = 0 mode = 0 full_duplex = 1 manual_cs = 0 [spi_board1] modalias = "spidev" max_speed_hz = 33000000 bus_num = 1 chip_select = 0 mode = 0 full_duplex = 1 manual_cs = 0 [gpio_para] gpio_used = 0 gpio_num = 0 [leds_para] leds_used = 1 green_led = port:PL10<1><1> green_led_active_low = 0 red_led = port:PA17<1><0> red_led_active_low = 0 [ths_para] ths_used = 1 ths_trip1_count = 8 ths_trip1_0 = 65 ths_trip1_1 = 70 ths_trip1_2 = 75 ths_trip1_3 = 80 ths_trip1_4 = 85 ths_trip1_5 = 90 ths_trip1_6 = 95 ths_trip1_7 = 100 ths_trip1_0_min = 0 ths_trip1_0_max = 1 ths_trip1_1_min = 1 ths_trip1_1_max = 2 ths_trip1_2_min = 2 ths_trip1_2_max = 3 ths_trip1_3_min = 3 ths_trip1_3_max = 4 ths_trip1_4_min = 4 ths_trip1_4_max = 5 ths_trip1_5_min = 5 ths_trip1_5_max = 6 ths_trip1_6_min = 6 ths_trip1_6_max = 7 ths_trip2_count = 1 ths_trip2_0 = 105 [cooler_table] cooler_count = 8 cooler0 = "1200000 4 4294967295 0" cooler1 = "912000 4 4294967295 0" cooler2 = "768000 4 4294967295 0" cooler3 = "648000 4 4294967295 0" cooler4 = "480000 4 4294967295 0" cooler5 = "480000 3 4294967295 0" cooler6 = "240000 2 4294967295 0" cooler7 = "240000 1 4294967295 0" [nand0_para] nand_support_2ch = 0 nand0_used = 0 nand0_we = port:PC00<2><0><1> nand0_ale = port:PC01<2><0><1> nand0_cle = port:PC02<2><0><1> nand0_ce1 = port:PC03<2><1><1> nand0_ce0 = port:PC04<2><1><1> nand0_nre = port:PC05<2><0><1> nand0_rb0 = port:PC06<2><1><1> nand0_rb1 = port:PC07<2><1><1> nand0_d0 = port:PC08<2><0><1> nand0_d1 = port:PC09<2><0><1> nand0_d2 = port:PC10<2><0><1> nand0_d3 = port:PC11<2><0><1> nand0_d4 = port:PC12<2><0><1> nand0_d5 = port:PC13<2><0><1> nand0_d6 = port:PC14<2><0><1> nand0_d7 = port:PC15<2><0><1> nand0_ndqs = port:PC16<2><0><1> [boot_disp] advert_disp = 1 auto_hpd = 1 output_type = 2 hdmi_channel = 0 hdmi_mode = 4 cvbs_channel = 1 cvbs_mode = 11 output_full = 1 hdmi_mode_check = 1 [disp_init] disp_init_enable = 1 disp_mode = 1 screen0_output_type = 2 screen0_output_mode = 11 screen1_output_type = 2 screen1_output_mode = 11 fb0_format = 0 fb0_width = 0 fb0_height = 0 fb1_format = 0 fb1_width = 0 fb1_height = 0 [hdmi_para] hdmi_used = 0 hdmi_power = "vcc-hdmi-18" [tv_para] tv_used = 1 tv_dac_used = 1 tv_dac_src0 = 0 [pwm0_para] pwm_used = 0 pwm_positive = port:PA05<3><0> [pwm1_para] pwm_used = 0 pwm_positive = port:PA06<3><0> [gmac0] gmac_used = 2 gmac_power1 = [csi0] vip_used = 0 vip_mode = 0 vip_dev_qty = 1 vip_define_sensor_list = 0 vip_csi_pck = port:PE00<2> vip_csi_mck = port:PE01<2> vip_csi_hsync = port:PE02<2> vip_csi_vsync = port:PE03<2> vip_csi_d0 = port:PE04<2> vip_csi_d1 = port:PE05<2> vip_csi_d2 = port:PE06<2> vip_csi_d3 = port:PE07<2> vip_csi_d4 = port:PE08<2> vip_csi_d5 = port:PE09<2> vip_csi_d6 = port:PE10<2> vip_csi_d7 = port:PE11<2> vip_csi_sck = port:PE12<2> vip_csi_sda = port:PE13<2> vip_dev0_mname = "gc2035" vip_dev0_pos = "front" vip_dev0_lane = 1 vip_dev0_twi_id = 2 vip_dev0_twi_addr = 120 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 vip_dev0_stby_mode = 0 vip_dev0_vflip = 1 vip_dev0_hflip = 1 vip_dev0_iovdd = "" vip_dev0_iovdd_vol = 2800000 vip_dev0_avdd = "" vip_dev0_avdd_vol = 2800000 vip_dev0_dvdd = "" vip_dev0_dvdd_vol = 1800000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = 2800000 vip_dev0_power_en = port:PA17<1><1> vip_dev0_reset = port:PE14<1><1> vip_dev0_pwdn = port:PE15<1><0> vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = vip_dev0_act_used = 0 vip_dev0_act_name = "ad5820_act" vip_dev0_act_slave = 24 vip_dev1_mname = "" vip_dev1_pos = "rear" vip_dev1_lane = 1 vip_dev1_twi_id = 0 vip_dev1_twi_addr = vip_dev1_isp_used = 0 vip_dev1_fmt = 1 vip_dev1_stby_mode = 0 vip_dev1_vflip = 0 vip_dev1_hflip = 0 vip_dev1_iovdd = "" vip_dev1_iovdd_vol = 2800000 vip_dev1_avdd = "" vip_dev1_avdd_vol = 2800000 vip_dev1_dvdd = "" vip_dev1_dvdd_vol = 1500000 vip_dev1_afvdd = "" vip_dev1_afvdd_vol = 2800000 vip_dev1_power_en = vip_dev1_reset = vip_dev1_pwdn = vip_dev1_flash_en = vip_dev1_flash_mode = vip_dev1_af_pwdn = [tvout_para] tvout_used = 1 tvout_channel_num = 1 tv_en = [tvin_para] tvin_used = 0 tvin_channel_num = [di_para] di_used = 1 [mmc0_para] sdc_used = 1 sdc_detmode = 3 sdc_buswidth = 4 sdc_clk = port:PF02<2><1><2> sdc_cmd = port:PF03<2><1><2> sdc_d0 = port:PF01<2><1><2> sdc_d1 = port:PF00<2><1><2> sdc_d2 = port:PF05<2><1><2> sdc_d3 = port:PF04<2><1><2> sdc_det = port:PF06<0><1><2> sdc_use_wp = 0 sdc_wp = sdc_isio = 0 sdc_regulator = "none" sdc_power_supply = "none" [mmc1_para] sdc_used = 1 sdc_detmode = 4 sdc_buswidth = 4 sdc_clk = port:PG00<2><1><2> sdc_cmd = port:PG01<2><1><2> sdc_d0 = port:PG02<2><1><2> sdc_d1 = port:PG03<2><1><2> sdc_d2 = port:PG04<2><1><2> sdc_d3 = port:PG05<2><1><2> sdc_det = sdc_use_wp = 0 sdc_wp = sdc_isio = 1 sdc_regulator = "none" sdc_power_supply = "none" sdc_2xmode = 1 sdc_ddrmode = 1 [mmc2_para] sdc_used = 0 sdc_detmode = 3 sdc_buswidth = 8 sdc_clk = port:PC05<3><1><2> sdc_cmd = port:PC06<3><1><2> sdc_d0 = port:PC08<3><1><2> sdc_d1 = port:PC09<3><1><2> sdc_d2 = port:PC10<3><1><2> sdc_d3 = port:PC11<3><1><2> sdc_d4 = port:PC12<3><1><2> sdc_d5 = port:PC13<3><1><2> sdc_d6 = port:PC14<3><1><2> sdc_d7 = port:PC15<3><1><2> emmc_rst = port:PC16<3><1><2> sdc_det = sdc_use_wp = 0 sdc_wp = sdc_isio = 0 sdc_regulator = "none" sdc_power_supply = "none" sdc_2xmode = 1 sdc_ddrmode = 1 [smc_para] smc_used = smc_rst = port:PA09<2> smc_vppen = port:PA20<3> smc_vppp = port:PA21<3> smc_det = port:PA10<2> smc_vccen = port:PA06<2> smc_sck = port:PA07<2> smc_sda = port:PA08<2> [usbc0] usb_used = 1 usb_port_type = 2 usb_detect_type = 0 usb_id_gpio = port:PG12<0><1> usb_det_vbus_gpio = port:PG12<0><1> usb_drv_vbus_gpio = port:PL02<1><0><0> usb_host_init_state = 1 usb_restrict_gpio = usb_restric_flag = 0 usb_restric_voltage = 3550000 usb_restric_capacity = 5 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 [usbc1] usb_used = 1 usb_drv_vbus_gpio = usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 [usbc2] usb_used = 1 usb_drv_vbus_gpio = usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 [usbc3] usb_used = 1 usb_drv_vbus_gpio = usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 [usb_feature] vendor_id = 6353 mass_storage_id = 1 adb_id = 2 manufacturer_name = "USB Developer" product_name = "Android" serial_number = "20080411" [msc_feature] vendor_name = "USB 2.0" product_name = "USB Flash Driver" release = 100 luns = 3 [serial_feature] serial_unique = 0 [module_para] module_power0 = port:PA20<1><0> module_power0_vol = 1 module_power1 = module_power1_vol = module_power2 = module_power2_vol = module_power3 = module_power3_vol = module_select_pin0 = module_select_pin1 = chip_en = lpo_use_apclk = "losc_out" [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 3 wifi_usbc_type = 1 wl_reg_on = port:PL07<1><0> wl_host_wake = port:PG10<0><0> wl_host_wake_invert = 0 [bt_para] bt_used = 0 bt_uart_id = 1 bt_uart_baud = 1500000 bt_rst_n = port:PL01<1><0> bt_wake = port:PA12<1><0> bt_host_wake = port:PL06<0><0> bt_host_wake_invert = 0 [pcm0] daudio_used = 0 daudio_master = 4 daudio_select = 1 audio_format = 1 signal_inversion = 1 mclk_fs = 128 sample_resolution = 16 slot_width_select = 32 pcm_lrck_period = 32 pcm_lrckr_period = 1 msb_lsb_first = 0 sign_extend = 0 slot_index = 0 slot_width = 32 frame_width = 0 tx_data_mode = 0 rx_data_mode = 0 i2s_mclk = port:PA18<2><1> i2s_bclk = port:PA19<2><1> i2s_dout0 = port:PA20<2><1> i2s_din = port:PA21<2><1> [pcm1] daudio_used = 0 daudio_master = 4 daudio_select = 1 audio_format = 1 signal_inversion = 1 mclk_fs = 128 sample_resolution = 16 slot_width_select = 32 pcm_lrck_period = 32 pcm_lrckr_period = 1 msb_lsb_first = 0 sign_extend = 0 slot_index = 0 slot_width = 32 frame_width = 0 tx_data_mode = 0 rx_data_mode = 0 i2s_mclk = port:PG10<2><1> i2s_bclk = port:PG11<2><1> i2s_dout0 = port:PG12<2><1> i2s_din = port:PG13<2><1> [audio0] audio_used = 1 lineout_vol = 31 cap_vol = 5 audio_hp_ldo = "none" adcagc_used = 0 adcdrc_used = 0 dacdrc_used = 0 adchpf_used = 0 dachpf_used = 0 audio_pa_ctrl = port:PA10<1><0> [spdif0] spdif_used = 0 spdif_dout = port:PA17<2><1> [audiohub] hub_used = 0 codec_used = 1 spdif_used = 1 hdmi_used = 0 [s_cir0] ir_used = 1 ir_rx = port:PL11<2><1> ir_power_key_code0 = 87 ir_addr_code0 = 40704 ir_power_key_code1 = 26 ir_addr_code1 = 64260 ir_power_key_code2 = 20 ir_addr_code2 = 32640 ir_power_key_code3 = 21 ir_addr_code3 = 32640 ir_power_key_code4 = 11 ir_addr_code4 = 63240 ir_power_key_code5 = 3 ir_addr_code5 = 239 ir_power_key_code6 = 159 ir_addr_code6 = 19635 ir_power_key_code7 = 10 ir_addr_code7 = 30536 ir_power_key_code8 = 69 ir_addr_code8 = 48386 ir_power_key_code9 = 77 ir_addr_code9 = 56865 ir_power_key_code10 = 24 ir_addr_code10 = 65025 ir_power_key_code11 = 87 ir_addr_code11 = 65280 ir_power_key_code12 = 77 ir_addr_code12 = 65344 ir_power_key_code13 = 136 ir_addr_code13 = 56610 [cir] ir_used = 0 ir_tx = port:PH07<2> [dvfs_table] pmuic_type = 1 pmu_gpio0 = port:PL06<1><1><2><1> pmu_level0 = 11300 pmu_level1 = 1100 max_freq = 1200000000 min_freq = 240000000 boot_freq = 1008000000 LV_count = 6 LV1_freq = 1200000000 LV1_volt = 1300 LV2_freq = 1008000000 LV2_volt = 1300 LV3_freq = 912000000 LV3_volt = 1100 LV4_freq = 648000000 LV4_volt = 1100 LV5_freq = 480000000 LV5_volt = 1100 LV6_freq = 240000000 LV6_volt = 1100 [gpu_dvfs_table] G_LV_count = 3 G_LV0_freq = 312000000 G_LV0_volt = 1200000 G_LV1_freq = 384000000 G_LV1_volt = 1200000 G_LV2_freq = 456000000 G_LV2_volt = 1200000 [board_vendor] vid_used = 0 vid_count = 6 vid_bit_0 = port:PD16<0><1> vid_bit_1 = port:PD15<0><1> vid_bit_2 = port:PD14<0><1> vid_bit_3 = port:PD13<0><1> vid_bit_4 = port:PD12<0><1> vid_bit_5 = port:PD17<0><1> [Vdevice] Vdevice_used = 0 Vdevice_0 = port:PH10<5><1><2> Vdevice_1 = port:PH11<5><1><2> [s_uart0] s_uart_used = 0 s_uart_tx = port:PL02<2> s_uart_rx = port:PL03<2> [s_rsb0] s_rsb_used = 1 s_rsb_sck = port:PL00<2><1><2> s_rsb_sda = port:PL01<2><1><2> [s_jtag0] s_jtag_used = 0 s_jtag_tms = port:PL04<2><1><2> s_jtag_tck = port:PL05<2><1><2> s_jtag_tdo = port:PL06<2><1><2> s_jtag_tdi = port:PL07<2><1><2> [s_powchk] s_powchk_used = -2147483648 s_power_reg = 0 s_system_power = 50 [sim0] scr_used = 0 scr_vccen = port:PA06<2> scr_slk = port:PA07<2> scr_sda = port:PA08<2> scr_rst = port:PA09<2> scr_det = port:PA10<2> [ts0] tsc_used = 0 tsc_clk = port:PE00<3> tsc_err = port:PE01<3> tsc_sync = port:PE02<3> tsc_dvld = port:PE03<3> tsc_d0 = port:PE04<3> tsc_d1 = port:PE05<3> tsc_d2 = port:PE06<3> tsc_d3 = port:PE07<3> tsc_d4 = port:PE08<3> tsc_d5 = port:PE09<3> tsc_d6 = port:PE10<3> tsc_d7 = port:PE11<3> [gpio_power_key] key_used = 0 key_io = port:PL03<6><0> [key_para] key_used = 0 key_cnt = 5 key1_vol = 222 key2_vol = 444 key3_vol = 666 key4_vol = 857 key5_vol = 2000 [d7s_para] d7s_used = 0 din_gpio = port:PD00<1><1> clk_gpio = port:PD01<1><1> stb_gpio = port:PD02<1><1> [mali_para] mali_used = 0 mali_clkdiv = 1 mali_extreme_freq = 600 mali_extreme_vol = 1400 [w1_para] w1_used = 1 gpio = 10 [corekeeper] corekeeper_enabled = 1 ### Loaded modules: Module Size Used by 8189es 1075930 0 zram 8964 4 pcf8591 3363 0 bmp085 3487 0 cdc_ether 3679 0 usbnet 14096 1 cdc_ether g_serial 28549 0 btrfs 712409 0 ### Current sysinfo: Linux 3.4.113-sun8i (orangepi) 11/04/2017 _armv7l_ (4 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 2.27 0.00 1.35 1.29 0.00 95.10 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn ram0 0.00 0.00 0.00 0 0 ram1 0.00 0.00 0.00 0 0 ram2 0.00 0.00 0.00 0 0 ram3 0.00 0.00 0.00 0 0 ram4 0.00 0.00 0.00 0 0 ram5 0.00 0.00 0.00 0 0 ram6 0.00 0.00 0.00 0 0 ram7 0.00 0.00 0.00 0 0 mmcblk0 6.66 305.10 107.75 169889 60000 mmcblk0p1 6.34 297.11 107.75 165441 59996 zram0 0.00 0.00 0.00 0 0 zram1 0.00 0.00 0.00 0 0 zram2 0.00 0.00 0.00 0 0 zram3 0.00 0.00 0.00 0 0 procs -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu-------- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 108072 5128 101776 0 0 78 27 97 126 2 1 95 1 0 total used free shared buff/cache available Mem: 241M 31M 105M 2.8M 104M 190M Swap: 120M 0B 120M [ 1.616813] usbcore: registered new interface driver ums-freecom [ 1.616916] usbcore: registered new interface driver ums-isd200 [ 1.617012] usbcore: registered new interface driver ums-jumpshot [ 1.617110] usbcore: registered new interface driver ums-karma [ 1.617207] usbcore: registered new interface driver ums-onetouch [ 1.617334] usbcore: registered new interface driver ums-realtek [ 1.617441] usbcore: registered new interface driver ums-sddr09 [ 1.617549] usbcore: registered new interface driver ums-sddr55 [ 1.617648] usbcore: registered new interface driver ums-usbat [ 1.618095] uinput result 0 , vmouse_init [ 1.619359] mousedev: PS/2 mouse device common for all mice [ 1.619839] sunxikbd_init failed. [ 1.619863] sunxikbd_init failed. [ 1.619886] ls_fetch_sysconfig_para: type err device_used = 0. [ 1.619904] =========script_get_err============ [ 1.619921] ltr_init: ls_fetch_sysconfig_para err. [ 1.620592] [RTC] WARNING: Rtc time will be wrong!! [ 1.620613] [RTC] WARNING: use *internal OSC* as clock source [ 1.621130] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 1.621231] i2c /dev entries driver [ 1.622055] sunxi cedar version 0.1 [ 1.622144] [cedar]: install start!!! [ 1.622522] [cedar]: install end!!! [ 1.622890] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.623107] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.623312] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.623515] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.623717] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.623921] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.624122] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.624349] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.624568] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.624816] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 1.625053] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 1.625290] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 1.625526] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 1.625763] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 1.626000] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 1.626235] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 1.626472] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 1.626708] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 1.626740] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 1.627085] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 1.627388] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 1.627415] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 1.627437] timeout_to_interv, line 167 [ 1.627454] interv_to_timeout, line 189 [ 1.627474] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 1.628342] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.628744] calibrat: max_cpufreq 1008Mhz Type 1! [ 1.628771] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 1.629400] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 4 2017 at 07:44:08 [ 1.629469] [mmc]: get mmc0's sdc_power is null! [ 1.629526] [mmc]: get mmc1's sdc_power is null! [ 1.629545] [mmc]: get mmc1's 2xmode ok, val = 1 [ 1.629565] [mmc]: get mmc1's ddrmode ok, val = 1 [ 1.629598] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 [ 1.634202] [mmc]: sdc0 power_supply is null [ 1.636950] no blue_led, ignore it! [ 1.637418] Registered led device: red_led [ 1.637649] Registered led device: green_led [ 1.637682] no led_0, ignore it! [ 1.637699] no led_1, ignore it! [ 1.637714] no led_2, ignore it! [ 1.637729] no led_3, ignore it! [ 1.637743] no led_4, ignore it! [ 1.637758] no led_5, ignore it! [ 1.637773] no led_6, ignore it! [ 1.637788] no led_7, ignore it! [ 1.639448] usbcore: registered new interface driver usbhid [ 1.639471] usbhid: USB HID core driver [ 1.648052] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.650392] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.650775] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.650804] [DAUDIO0] driver not init,just return. [ 1.657863] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 1.660630] oprofile: using arm/armv7-ca7 [ 1.661000] u32 classifier [ 1.661019] Performance counters on [ 1.661035] input device check on [ 1.661050] Actions configured [ 1.661694] TCP: bic registered [ 1.661715] TCP: cubic registered [ 1.661731] TCP: westwood registered [ 1.661748] TCP: highspeed registered [ 1.661764] TCP: hybla registered [ 1.661780] TCP: htcp registered [ 1.661795] TCP: vegas registered [ 1.661811] TCP: veno registered [ 1.661827] TCP: scalable registered [ 1.661843] TCP: lp registered [ 1.661858] TCP: yeah registered [ 1.661874] TCP: illinois registered [ 1.661890] Initializing XFRM netlink socket [ 1.662310] NET: Registered protocol family 10 [ 1.664436] NET: Registered protocol family 17 [ 1.664497] NET: Registered protocol family 15 [ 1.664603] Registering the dns_resolver key type [ 1.665773] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 1.665818] ThumbEE CPU extension supported. [ 1.665859] Registering SWP/SWPB emulation handler [ 1.667048] registered taskstats version 1 [ 1.668600] cmdline,disp= [ 1.668974] [DISP] disp_init_tv,line:539:screen 0 do not support TV TYPE! [ 1.669012] [DISP] bsp_disp_tv_register,line:998:'ptv is null [ 1.669035] tv registered!! [ 1.669109] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=11 [ 1.670607] ths_fetch_sysconfig_para: type err device_used = 1. [ 1.673320] CPU Budget:corekeeper enabled [ 1.673875] CPU Budget:Register notifier [ 1.673900] CPU Budget:register Success [ 1.673926] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 1.680731] [rf_pm]: Did not config module_power1 in sys_config [ 1.680761] [rf_pm]: Did not config module_power2 in sys_config [ 1.680783] [rf_pm]: Did not config module_power3 in sys_config [ 1.680804] [rf_pm]: mod has no chip_en gpio [ 1.680822] [rf_pm]: regulator on. [ 1.680851] [rf_pm]: set losc_out 32k out[wifi_pm]: set wl_reg_on 1 ! [ 1.696580] ehci_irq: highspeed device connect [ 1.713708] mmc0: new high speed SDHC card at address b368 [ 1.714672] mmcblk0: mmc0:b368 USD 7.45 GiB [ 1.716904] mmcblk0: p1 [ 1.718036] mmcblk mmc0:b368: Card claimed for testing. [ 1.718066] mmc0:b368: USD 7.45 GiB [ 1.781446] hci: ERR: sunxi_ehci is already enable, can not enable again [ 1.781474] hci: ERR: sunxi_ohci is already enable, can not enable again [ 1.783011] [mmc]: sdc1 power_supply is null [ 1.840076] mmc1: new high speed SDIO card at address 0001 [ 1.881575] [wifi_pm]: wifi gpio init is OK !! [ 1.881686] [rfkill]: init no bt used in configuration [ 1.881710] ALSA device list: [ 1.881725] #0: audiocodec [ 1.881740] #1: sndhdmi [ 1.883507] Freeing init memory: 328K [ 1.970187] usb 2-1: new high-speed USB device number 2 using sunxi-ehci [ 2.635418] vmouse_input_dev_open [ 2.690284] vmouse_input_dev_close [ 3.002593] Btrfs loaded [ 3.438764] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 4.042464] systemd[1]: System time before build time, advancing clock. [ 4.580566] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.581207] systemd[1]: Detected architecture arm. [ 4.611398] systemd[1]: Set hostname to . [ 5.170985] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.190429] systemd[1]: Reached target Encrypted Volumes. [ 5.210328] systemd[1]: Reached target Remote File Systems (Pre). [ 5.230736] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.250615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.271259] systemd[1]: Created slice System Slice. [ 5.291109] systemd[1]: Created slice system-serial-getty.slice. [ 5.310356] systemd[1]: Reached target Swap. [ 5.330714] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 5.351576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.370633] systemd[1]: Listening on udev Kernel Socket. [ 5.390760] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.410955] systemd[1]: Listening on Journal Audit Socket. [ 5.430373] systemd[1]: Reached target Remote File Systems. [ 5.450979] systemd[1]: Created slice User and Session Slice. [ 5.470364] systemd[1]: Reached target Slices. [ 5.490325] systemd[1]: Reached target Paths. [ 5.510538] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.530475] systemd[1]: Listening on Syslog Socket. [ 5.550599] systemd[1]: Listening on udev Control Socket. [ 5.570668] systemd[1]: Listening on Journal Socket. [ 5.671241] systemd[1]: Starting Load Kernel Modules... [ 5.788430] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6b033c0, ep1in-bulk) [ 5.788474] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xc6b033c0, ep1in-bulk) [ 5.788504] ep_matches, wrn: endpoint already claimed, ep(0xc09791f8, 0xc6b033c0, ep1out-bulk) [ 5.788527] gadget_is_softwinner_otg is not -int [ 5.788543] gadget_is_softwinner_otg is not -int [ 5.788580] g_serial gadget: Gadget Serial v2.4 [ 5.788612] g_serial gadget: g_serial ready [ 5.830697] systemd[1]: Mounting Debug File System... [ 5.991332] systemd[1]: Starting Set console keymap... [ 6.002593] [wifi_pm]: set wl_reg_on 1 ! [ 6.010901] bFWReady == _FALSE call reset 8051... [ 6.111484] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.230753] systemd[1]: Starting Nameserver information manager... [ 6.351371] systemd[1]: Starting Restore / save the current clock... [ 6.490649] systemd[1]: Mounting POSIX Message Queue File System... [ 6.621225] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.715110] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.736600] systemd[1]: Mounted POSIX Message Queue File System. [ 6.760623] systemd[1]: Mounted Debug File System. [ 6.781274] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 6.950205] systemd[1]: Failed to start Load Kernel Modules. [ 6.990275] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 6.991570] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 7.130261] systemd[1]: Started Set console keymap. [ 7.300255] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.730358] systemd[1]: Started Restore / save the current clock. [ 7.900283] systemd[1]: Started Remount Root and Kernel File Systems. [ 8.121085] systemd[1]: Started Nameserver information manager. [ 8.218117] systemd[1]: Time has been changed [ 8.449663] systemd[1]: Reached target Network (Pre). [ 8.551151] systemd[1]: Starting Load/Save Random Seed... [ 8.691206] systemd[1]: Starting udev Coldplug all Devices... [ 8.881336] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.980813] systemd[1]: Mounting FUSE Control File System... [ 9.081127] systemd[1]: Starting Apply Kernel Variables... [ 9.119763] systemd[1]: Mounted FUSE Control File System. [ 9.390285] systemd[1]: Started Load/Save Random Seed. [ 9.930469] systemd[1]: Started Create Static Device Nodes in /dev. [ 10.100302] systemd[1]: Started Apply Kernel Variables. [ 10.230249] systemd[1]: Started udev Coldplug all Devices. [ 10.391402] systemd[1]: Starting udev Kernel Device Manager... [ 10.410374] systemd[1]: Reached target Local File Systems (Pre). [ 10.560676] systemd[1]: Mounting /tmp... [ 10.649272] systemd[1]: Started udev Kernel Device Manager. [ 10.669179] systemd[1]: Mounted /tmp. [ 10.751500] systemd[1]: Started Entropy daemon using the HAVEGE algorithm. [ 10.771744] systemd[1]: Reached target Local File Systems. [ 10.880960] systemd[1]: Starting Raise network interfaces... [ 11.011960] systemd[1]: Starting Armbian enhanced Log2Ram... [ 11.162764] systemd[1]: Starting Set console font and keymap... [ 11.214506] cdc_ether 2-1:2.0: eth1: register 'cdc_ether' at usb-sunxi-ehci-1, CDC Ethernet Device, c0:74:2b:ff:e8:ff [ 11.214894] usbcore: registered new interface driver cdc_ether [ 11.527640] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 11.527722] bmp085: probe of 0-0077 failed with error -70 [ 11.546214] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 11.550322] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 11.650947] systemd[1]: Started Armbian enhanced Log2Ram. [ 11.782812] systemd[1]: Found device /dev/ttyS0. [ 11.839159] vmouse_input_dev_open [ 11.875334] vmouse_input_dev_close [ 11.875399] systemd[1]: Reached target Sound Card. [ 11.971703] systemd[1]: Starting Journal Service... [ 12.076421] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.221656] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.331092] systemd[1]: Started Journal Service. [ 12.939204] systemd-journald[360]: Received request to flush runtime journal from PID 1 [ 24.556913] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 24.558470] zram: Creating 4 devices ... [ 24.676263] Adding 30960k swap on /dev/zram0. Priority:5 extents:1 across:30960k SS [ 24.723301] Adding 30960k swap on /dev/zram1. Priority:5 extents:1 across:30960k SS [ 24.765547] Adding 30960k swap on /dev/zram2. Priority:5 extents:1 across:30960k SS [ 24.807610] Adding 30960k swap on /dev/zram3. Priority:5 extents:1 across:30960k SS [ 25.936397] gmac0: probed [ 25.936874] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) [ 28.625214] mmc1: card 0001 removed [ 28.625715] [mmc]: sdc1 power_supply is null [ 28.762728] [wifi_pm]: set wl_reg_on 0 ! [ 28.829972] [mmc]: sdc1 power_supply is null [ 28.896266] mmc1: new high speed SDIO card at address 0001 [ 28.938670] [wifi_pm]: set wl_reg_on 1 ! [ 28.945895] bFWReady == _FALSE call reset 8051... [ 29.760517] ==> rtl8188e_iol_efuse_patch [ 29.990994] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 474.217486] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 528.392524] ADDRCONF(NETDEV_UP): eth0: link is not ready