Paste output
======== /flash/config.txt ==============
======== /flash/cmdline.txt ==============
======== /storage/.kodi/temp/kodi.log ==============
01:00:19.269 T:4101959680 NOTICE: special://profile/ is mapped to: special://masterprofile/
01:00:19.270 T:4101959680 NOTICE: -----------------------------------------------------------------------
01:00:19.270 T:4101959680 NOTICE: Starting Kodi (17.5 Git:5bd45ab). Platform: Linux ARM (Thumb) 32-bit
01:00:19.270 T:4101959680 NOTICE: Using Release Kodi x32 build
01:00:19.270 T:4101959680 NOTICE: Kodi compiled Oct 28 2017 by GCC 6.2.0 for Linux ARM (Thumb) 32-bit version 3.14.29 (200221)
01:00:19.270 T:4101959680 NOTICE: Running on LibreELEC (community): 8.2.0.1, kernel: Linux ARM 64-bit version 3.14.29
01:00:19.270 T:4101959680 NOTICE: FFmpeg version/source: ffmpeg-3.1-kodi
01:00:19.270 T:4101959680 NOTICE: Host CPU: AArch64 Processor rev 4 (aarch64), 8 cores available
01:00:19.270 T:4101959680 NOTICE: ARM Features: Neon enabled
01:00:19.270 T:4101959680 NOTICE: special://xbmc/ is mapped to: /usr/share/kodi/
01:00:19.270 T:4101959680 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/kodi
01:00:19.270 T:4101959680 NOTICE: special://xbmcbinaddons/ is mapped to: /usr/lib/kodi/addons
01:00:19.270 T:4101959680 NOTICE: special://masterprofile/ is mapped to: /storage/.kodi/userdata
01:00:19.270 T:4101959680 NOTICE: special://envhome/ is mapped to: /storage
01:00:19.270 T:4101959680 NOTICE: special://home/ is mapped to: /storage/.kodi
01:00:19.270 T:4101959680 NOTICE: special://temp/ is mapped to: /storage/.kodi/temp
01:00:19.270 T:4101959680 NOTICE: special://logpath/ is mapped to: /storage/.kodi/temp
01:00:19.270 T:4101959680 NOTICE: The executable running is: /usr/lib/kodi/kodi.bin
01:00:19.270 T:4101959680 NOTICE: Local hostname: LibreS92
01:00:19.270 T:4101959680 NOTICE: Log File is located: /storage/.kodi/temp//kodi.log
01:00:19.275 T:4101959680 NOTICE: -----------------------------------------------------------------------
01:00:19.334 T:4101959680 ERROR: DBus: Error org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.UPower was not provided by any .service files
01:00:19.346 T:4101959680 NOTICE: load settings...
01:00:19.346 T:4101959680 NOTICE: AML device detected
01:00:19.467 T:4101959680 NOTICE: Found 2 Lists of Devices
01:00:19.467 T:4101959680 NOTICE: Enumerated ALSA devices:
01:00:19.467 T:4101959680 NOTICE: Device 1
01:00:19.467 T:4101959680 NOTICE: m_deviceName : default
01:00:19.467 T:4101959680 NOTICE: m_displayName : Default (AML-M8AUDIO Analog)
01:00:19.467 T:4101959680 NOTICE: m_displayNameExtra: PCM
01:00:19.467 T:4101959680 NOTICE: m_deviceType : AE_DEVTYPE_PCM
01:00:19.467 T:4101959680 NOTICE: m_channels : FL,FR,UNKNOWN1,LFE,BL,BR,FC,BC,BLOC,BROC
01:00:19.467 T:4101959680 NOTICE: m_sampleRates : 32000,44100,48000,88200,96000,176400,192000
01:00:19.467 T:4101959680 NOTICE: m_dataFormats : AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S16LE
01:00:19.467 T:4101959680 NOTICE: m_streamTypes : No passthrough capabilities
01:00:19.467 T:4101959680 NOTICE: Device 2
01:00:19.467 T:4101959680 NOTICE: m_deviceName : hdmi:CARD=AMLM8AUDIO,DEV=0
01:00:19.467 T:4101959680 NOTICE: m_displayName : AML-M8AUDIO
01:00:19.467 T:4101959680 NOTICE: m_displayNameExtra: HDMI
01:00:19.467 T:4101959680 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
01:00:19.467 T:4101959680 NOTICE: m_channels : FL,FR,BL,BR,FC,LFE,SL,SR
01:00:19.467 T:4101959680 NOTICE: m_sampleRates : 32000,44100,48000,88200,96000,176400,192000
01:00:19.468 T:4101959680 NOTICE: m_dataFormats : AE_FMT_S16NE,AE_FMT_S16LE,AE_FMT_RAW
01:00:19.468 T:4101959680 NOTICE: m_streamTypes : STREAM_TYPE_AC3,STREAM_TYPE_DTSHD,STREAM_TYPE_DTSHD_CORE,STREAM_TYPE_DTS_1024,STREAM_TYPE_DTS_2048,STREAM_TYPE_DTS_512,STREAM_TYPE_EAC3,STREAM_TYPE_TRUEHD
01:00:19.468 T:4101959680 NOTICE: Enumerated PULSE devices:
01:00:19.468 T:4101959680 NOTICE: Device 1
01:00:19.468 T:4101959680 NOTICE: m_deviceName : Default
01:00:19.468 T:4101959680 NOTICE: m_displayName : Default
01:00:19.468 T:4101959680 NOTICE: m_displayNameExtra: Bluetooth Audio (PULSEAUDIO)
01:00:19.468 T:4101959680 NOTICE: m_deviceType : AE_DEVTYPE_PCM
01:00:19.468 T:4101959680 NOTICE: m_channels : FL,FR
01:00:19.468 T:4101959680 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
01:00:19.468 T:4101959680 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
01:00:19.468 T:4101959680 NOTICE: m_streamTypes : No passthrough capabilities
01:00:19.489 T:4101959680 NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml
01:00:19.489 T:4101959680 NOTICE: Contents of special://xbmc/system/advancedsettings.xml are...
false
30
01:00:19.498 T:4101959680 NOTICE: Loaded settings file from special://profile/advancedsettings.xml
01:00:19.498 T:4101959680 NOTICE: Contents of special://profile/advancedsettings.xml are...
mysql
192.168.1.210
3306
kodi
*****
mysql
192.168.1.210
3306
kodi
*****
true
true
01:00:19.498 T:4101959680 WARNING: VIDEO database configuration is experimental.
01:00:19.499 T:4101959680 NOTICE: Default Video Player: VideoPlayer
01:00:19.499 T:4101959680 NOTICE: Default Audio Player: paplayer
01:00:19.499 T:4101959680 NOTICE: Disabled debug logging due to GUI setting. Level 0.
01:00:19.499 T:4101959680 NOTICE: Log level changed to "LOG_LEVEL_NORMAL"
01:00:19.499 T:4101959680 NOTICE: CMediaSourceSettings: loading media sources from special://masterprofile/sources.xml
01:00:19.526 T:4101959680 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
01:00:19.527 T:4101959680 NOTICE: Loaded playercorefactory configuration
01:00:19.527 T:4101959680 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
01:00:19.527 T:4101959680 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
01:00:19.660 T:4101959680 NOTICE: Running database version Addons27
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.kodi.game
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.libreelec.tv
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.xbmc.org
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.zachmorris
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.kodinerds
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.aeon.nox.silvo
01:00:19.925 T:4101959680 NOTICE: ADDONS: Using repository repository.marcelveldt
01:00:20.023 T:4101959680 NOTICE: InitWindowSystem: Using EGL Implementation: amlogic
01:00:20.150 T:4101959680 ERROR: GetString: error reading /storage/.kodi/userdata/disp_cap
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 60.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 59.940060 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 59.940060 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080i @ 50.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 30.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 29.970030 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 50.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 24.000000 Hz
01:00:20.151 T:4101959680 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 23.976025 Hz
01:00:20.151 T:4101959680 NOTICE: Found (1920x1080@60.000000) at 18, setting to RES_DESKTOP at 16
01:00:20.151 T:4101959680 NOTICE: Checking resolution 16
01:00:20.834 T:4101959680 NOTICE: GL_VENDOR = ARM
01:00:20.835 T:4101959680 NOTICE: GL_RENDERER = Mali-T820
01:00:20.835 T:4101959680 NOTICE: GL_VERSION = OpenGL ES 2.0 (OpenGL ES 3.2 v1.r11p0-00rel0.f83e33152085d4fe92
01:00:20.835 T:4101959680 NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 3.20
01:00:20.835 T:4101959680 NOTICE: GL_EXTENSIONS = GL_EXT_debug_marker GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth24 GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_EXT_read_format_bgra GL_OES_compressed_paletted_texture GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_image_external_essl3 GL_OES_EGL_sync GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_required_internalformat GL_OES_vertex_array_object GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_EXT_texture_rg GL_EXT_texture_type_2_10_10_10_REV GL_OES_fbo_render_mipmap GL_OES_element_index_uint GL_EXT_shadow_samplers GL_OES_texture_compression_astc GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_hdr GL_KHR_texture_compression_astc_sliced_3d GL_KHR_debug GL_EXT_occlusion_query_boolean GL_EXT_disjoint_timer_query GL_EXT_blend_minmax GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_OES_texture_3D GL_EXT_texture_storage GL_EXT_multisampled_render_to_texture GL_OES_surfaceless_context GL_OES_texture_stencil8 GL_EXT_shader_pixel_local_storage GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_ARM_mali_program_binary GL_EXT_sRGB GL_EXT_sRGB_write_control GL_EXT_texture_sRGB_decode GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_OES_texture_storage_multisample_2d_array GL_OES_shader_image_atomic GL_EXT_robustness GL_EXT_draw_buffers_indexed GL_OES_draw_buffers_indexed GL_EXT_texture_border_clamp GL_OES_texture_border_clamp GL_EXT_texture_cube_map_array GL_OES_texture_cube_map_array GL_OES_sample_variables GL_OES_sample_shading GL_OES_shader_multisample_interpolation GL_EXT_shader_io_blocks GL_OES_shader_io_blocks GL_EXT_tessellation_shader GL_OES_tessellation_shader GL_EXT_primitive_bounding_box GL_OES_primitive_bounding_box GL_EXT_geometry_shader GL_OES_geometry_shader GL_ANDROID_extension_pack_es31a GL_EXT_gpu_shader5 GL_OES_gpu_shader5 GL_EXT_texture_buffer GL_OES_texture_buffer GL_EXT_copy_image GL_OES_copy_image GL_EXT_color_buffer_half_float GL_EXT_color_buffer_float GL_OVR_multiview GL_OVR_multiview2 GL_OVR_multiview_multisampled_render_to_texture GL_ARM_packed_arithmetic GL_KHR_robustness GL_KHR_robust_buffer_access_behavior GL_EXT_draw_elements_base_vertex GL_OES_draw_elements_base_vertex
01:00:22.386 T:4010787680 NOTICE: Running database version Addons27
01:00:22.393 T:4010787680 NOTICE: Running database version ViewModes6
01:00:22.458 T:4010787680 NOTICE: Running database version Textures13
01:00:22.477 T:4010787680 ERROR: Unable to open database: MyMusic60 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.477 T:4010787680 ERROR: Unable to open database: MyMusic59 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.477 T:4010787680 ERROR: Unable to open database: MyMusic58 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic57 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic56 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic55 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic54 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic53 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic52 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic51 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic50 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.478 T:4010787680 ERROR: Unable to open database: MyMusic49 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic48 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic47 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic46 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic45 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic44 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic43 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic42 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic41 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.479 T:4010787680 ERROR: Unable to open database: MyMusic40 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic39 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic38 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic37 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic36 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic35 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic34 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic33 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.480 T:4010787680 ERROR: Unable to open database: MyMusic32 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyMusic60 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to create new database
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos107 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos106 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos105 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos104 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos103 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos102 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.481 T:4010787680 ERROR: Unable to open database: MyVideos101 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos100 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos99 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos98 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos97 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos96 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos95 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos94 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos93 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.482 T:4010787680 ERROR: Unable to open database: MyVideos92 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos91 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos90 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos89 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos88 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos87 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos86 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos85 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos84 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.483 T:4010787680 ERROR: Unable to open database: MyVideos83 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos82 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos81 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos80 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos79 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos78 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos77 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.484 T:4010787680 ERROR: Unable to open database: MyVideos76 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.485 T:4010787680 ERROR: Unable to open database: MyVideos75 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.485 T:4010787680 ERROR: Unable to open database: MyVideos107 [2003](Can't connect to MySQL server on '192.168.1.210' (101))
01:00:22.485 T:4010787680 ERROR: Unable to create new database
01:00:22.493 T:4010787680 NOTICE: Running database version TV29
01:00:22.496 T:4010787680 NOTICE: Running database version Epg11
01:00:22.518 T:4101959680 NOTICE: start dvd mediatype detection
01:00:22.565 T:3901735776 NOTICE: Register - new cec device registered on cec->AOCEC: CEC Adapter (0000:0000)
21:16:38.355 T:4101959680 WARNING: JSONRPC: Could not parse type "Setting.Details.SettingList"
21:16:38.760 T:4101959680 NOTICE: initialize done
21:16:38.760 T:4101959680 NOTICE: Running the application...
21:16:38.768 T:4101959680 NOTICE: starting zeroconf publishing
21:16:38.769 T:4101959680 NOTICE: CWebServer[8080]: Started
21:16:38.769 T:4101959680 NOTICE: starting upnp client
21:16:38.771 T:4101959680 NOTICE: starting upnp server
21:16:38.782 T:4101959680 NOTICE: starting upnp controller
21:16:38.782 T:4101959680 NOTICE: starting upnp renderer
21:16:38.794 T:3601478496 NOTICE: ES: Starting UDP Event server on port 9777
21:16:38.794 T:3601478496 NOTICE: UDP: Listening on port 9777 (ipv6 : true)
21:16:41.025 T:3806319456 NOTICE: script.tv.show.next.aired --> TV Show - Next Aired version 7.0.1 started
21:16:41.086 T:3739210592 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:16:41.457 T:3443712864 NOTICE: Skin Helper Service --> Starting WebService on port 52307
21:16:41.459 T:3825193824 NOTICE: Skin Helper Service --> Skin Helper Service version 1.1.23 started
21:16:42.591 T:3393381216 NOTICE: Skin Helper Backgrounds --> BackgroundsUpdater - started
21:16:42.611 T:3814708064 NOTICE: Skin Helper Widgets --> Backgroundservice started
21:16:43.784 T:3730035552 WARNING: CSkinInfo: failed to load skin settings
21:16:44.069 T:3711894368 NOTICE: [plugin.video.youtube] Startup: detected Krypton (Kodi-17.5), setting DASH_SUPPORT_BUILTIN = False, DASH_SUPPORT_ADDON = True
21:16:44.187 T:4010787680 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/tvshows.jpg
21:16:44.919 T:3739210592 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:16:45.213 T:3772765024 NOTICE: script.grab.fanart: Grab Fanart Service Started
21:16:45.435 T:3508523872 NOTICE: script.tv.show.next.aired --> Updating TheTVDB info for all continuing Kodi tv shows...
21:16:45.470 T:3508523872 NOTICE: script.tv.show.next.aired --> Retrieving next airing episodes for all continuing Kodi tv shows...
21:16:45.514 T:3508523872 NOTICE: script.tv.show.next.aired --> Update complete
21:16:46.529 T:3739210592 ERROR: GetDirectory - Error getting
21:18:27.659 T:4101959680 ERROR: Previous line repeats 6 times.
21:18:27.660 T:4101959680 NOTICE: Samba is idle. Closing the remaining connections
21:19:45.921 T:3274429280 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:19:49.354 T:3274429280 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/power.jpg
21:19:50.671 T:3274429280 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:19:51.095 T:3498029920 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/tvshows.jpg
21:21:00.327 T:4101959680 ERROR: GetDirectory - Error getting smb://USERNAME:PASSWORD@NSA320/photos/
21:21:00.327 T:4101959680 ERROR: CGUIDialogFileBrowser::GetDirectory(smb://USERNAME:PASSWORD@NSA320/photos/) failed
21:21:25.790 T:3274429280 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/tvshows.jpg
21:21:29.149 T:3274429280 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:21:29.778 T:3498029920 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/power.jpg
21:21:44.393 T:4101959680 NOTICE: stopping upnp controller
21:21:44.393 T:4101959680 NOTICE: stopping upnp server
21:22:34.708 T:3274429280 ERROR: GetDirectory - Error getting
21:22:42.733 T:4101959680 ERROR: Previous line repeats 2 times.
21:22:42.733 T:4101959680 ERROR: Control 55 in window 10001 has been asked to focus, but it can't
21:22:46.671 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/addons.xml
21:22:46.672 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/files.xml
21:22:46.673 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/playlists.xml
21:22:46.674 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/actors.xml
21:22:46.675 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/country.xml
21:22:46.676 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/directors.xml
21:22:46.677 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/genres.xml
21:22:46.677 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/index.xml
21:22:46.678 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/recentlyaddedmovies.xml
21:22:46.678 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/sets.xml
21:22:46.679 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/studios.xml
21:22:46.680 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/tags.xml
21:22:46.680 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/titles.xml
21:22:46.681 T:3568309088 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/years.xml
21:22:51.916 T:4101959680 ERROR: Control 55 in window 10001 has been asked to focus, but it can't
21:22:56.561 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/addons.xml
21:22:56.582 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/files.xml
21:22:56.582 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/playlists.xml
21:22:56.584 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/actors.xml
21:22:56.585 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/country.xml
21:22:56.586 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/directors.xml
21:22:56.586 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/genres.xml
21:22:56.587 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/index.xml
21:22:56.588 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/recentlyaddedmovies.xml
21:22:56.589 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/sets.xml
21:22:56.589 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/studios.xml
21:22:56.590 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/tags.xml
21:22:56.591 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/titles.xml
21:22:56.591 T:3551515488 ERROR: Delete - Error deleting file /storage/.kodi/userdata/library/video/movies/years.xml
21:23:01.130 T:3559904096 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/power.jpg
21:23:01.695 T:3498029920 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/movies.jpg
21:24:03.638 T:3559904096 ERROR: Previous line repeats 1 times.
21:24:03.638 T:3559904096 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/tvshows.jpg
21:24:06.857 T:3526349664 ERROR: DoWork - Direct texture file loading failed for resource://resource.images.skinbackgrounds.titanium/video.jpg
21:24:40.586 T:3635032928 ERROR: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
- NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
Error Type:
Error Contents: ('result',)
Traceback (most recent call last):
File "/storage/.kodi/addons/script.toolbox/default.py", line 146, in
Main()
File "/storage/.kodi/addons/script.toolbox/default.py", line 27, in __init__
self.selection_dialog()
File "/storage/.kodi/addons/script.toolbox/default.py", line 140, in selection_dialog
AddArtToLibrary("extrathumb", "Movie", "extrathumbs", EXTRATHUMB_LIMIT)
File "/storage/.kodi/addons/script.toolbox/resources/lib/Utils.py", line 50, in AddArtToLibrary
if (json_response['result'] is not None) and ('%ss' % (media.lower()) in json_response['result']):
KeyError: ('result',)
-->End of Python script error report<--
21:24:40.660 T:4101959680 NOTICE: Samba is idle. Closing the remaining connections
21:25:05.492 T:4101959680 ERROR: GetDirectory - Error getting /var/media/EXTERNAL/Movies/
21:25:05.492 T:4101959680 ERROR: CGUIMediaWindow::GetDirectory(/var/media/EXTERNAL/Movies/) failed
21:26:43.961 T:4101959680 NOTICE: Samba is idle. Closing the remaining connections
21:27:08.983 T:3559904096 ERROR: GetDirectory - Error getting
21:27:59.274 T:3274429280 ERROR: Previous line repeats 2 times.
21:27:59.274 T:3274429280 WARNING: CSkinInfo: failed to load skin settings
21:27:59.305 T:4101959680 ERROR: Window Translator: Can't find window videolibrary
21:27:59.307 T:4101959680 WARNING: Label Formating: $VAR[GlobalFanartVar] is not defined
21:27:59.512 T:4101959680 ERROR: Control 1000 in window 13001 has been asked to focus, but it can't
======== /storage/.kodi/temp/dmesg.txt ==============
[ 0.000000@0] Initializing cgroup subsys cpuset
[ 0.000000@0] Initializing cgroup subsys cpu
[ 0.000000@0] Initializing cgroup subsys cpuacct
[ 0.000000@0] Linux version 3.14.29 (kszaq@cvm) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP Sat Oct 28 12:59:24 CEST 2017
[ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000@0] no prop version_code
[ 0.000000@0] bootconsole [earlycon0] enabled
[ 0.000000@0] fdt Reserved memory table:
[ 0.000000@0] linux,di: 0x000000007d300000 - 0x000000007f100000 (30 MiB)
[ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007d300000, size 30 MiB
[ 0.000000@0] linux,ion-dev: 0x0000000079300000 - 0x000000007d300000 (64 MiB)
[ 0.000000@0] linux,vdin1_cma: 0x0000000078000000 - 0x0000000079000000 (16 MiB)
[ 0.000000@0] cma: Reserved 16 MiB at 78000000, total cma pages:4096
[ 0.000000@0] linux,ppmgr: 0x0000000079300000 - 0x0000000079300000 (0 MiB)
[ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
[ 0.000000@0] cma: Reserved 192 MiB at 67c00000, total cma pages:53248
[ 0.000000@0] linux,picdec: 0x0000000079300000 - 0x0000000079300000 (0 MiB)
[ 0.000000@0] Reserved memory: incorrect alignment of CMA region
[ 0.000000@0] linux,codec_mm_reserved: 0x0000000073f00000 - 0x0000000078000000 (65 MiB)
[ 0.000000@0] fdt Reserved memory total: 370 MiB
[ 0.000000@0] cma: Reserved 8 MiB at 67400000, total cma pages:55296
[ 0.000000@0] On node 0 totalpages: 519424
[ 0.000000@0] Normal zone: 11176 pages used for memmap
[ 0.000000@0] Normal zone: 0 pages reserved
[ 0.000000@0] Normal zone: 519424 pages, LIFO batch:31
[ 0.000000@0] psci: probing function IDs from device-tree
[ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07926c000 s17216 r8192 d23744 u49152
[ 0.000000@0] pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508248
[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=disabled logo=osd1,loaded,0x3d800000,1080p60hz maxcpus=8 vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=fa:ab:6e:16:13:f0 androidboot.mac=fa:ab:6e:16:13:f0 bootfromext console=tty0 systemd.show_status=auto noswap
[ 0.000000@0] logo: osd1
[ 0.000000@0] logo: loaded
[ 0.000000@0] logo: 0x3d800000
[ 0.000000@0] logo: 1080p60hz
[ 0.000000@0] vout_serve: 1080p60hz
[ 0.000000@0] vout_serve: en: 1
[ 0.000000@0] vout_serve: set_vout_init_vmode: 1080p60hz
[ 0.000000@0] vout_serve: 1080p60hz
[ 0.000000@0] vout_serve: enable: 1
[ 0.000000@0] logo: get hdmimode: 1080p60hz
[ 0.000000@0] logo: get cvbsmode: 576cvbs
[ 0.000000@0] tv_vout: cvbs performance line = 0
[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000@0] Memory: 1627020K/2077696K available (6745K kernel code, 722K rwdata, 2496K rodata, 904K init, 2919K bss, 450676K reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
[ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042bbd800 ( 43 MB)
[ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07f100000 ( 2033 MB)
[ 0.000000@0] .init : 0xffffffc001988000 - 0xffffffc001a6a340 ( 905 kB)
[ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001987684 ( 9246 kB)
[ 0.000000@0] .data : 0xffffffc001a6b000 - 0xffffffc001b1fa10 ( 723 kB)
[ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01986fff]
[ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000@0] arch_multi_cluster:1
[ 0.000000@0] Hierarchical RCU implementation.
[ 0.000000@0] RCU debugfs-based tracing is enabled.
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.008246@0] meson_bc_timer: mclk->mux_reg =ffffff8000014990,mclk->reg =ffffff8000016994
[ 0.016777@0] Console: colour dummy device 80x25
[ 0.021088@0] console [tty0] enabled
[ 0.024673@0] bootconsole [earlycon0] disabled
[ 0.030699@0] allocated 8388608 bytes of page_cgroup
[ 0.030710@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.030734@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.030751@0] pid_max: default: 32768 minimum: 301
[ 0.030883@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.030895@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.036397@0] Initializing cgroup subsys memory
[ 0.036433@0] Initializing cgroup subsys devices
[ 0.036443@0] Initializing cgroup subsys freezer
[ 0.036453@0] Initializing cgroup subsys blkio
[ 0.036500@0] ftrace: allocating 23495 entries in 92 pages
[ 0.064934@0] /cpus/cpu@0: Missing clock-frequency property
[ 0.064959@0] /cpus/cpu@1: Missing clock-frequency property
[ 0.064970@0] /cpus/cpu@2: Missing clock-frequency property
[ 0.064982@0] /cpus/cpu@3: Missing clock-frequency property
[ 0.064993@0] /cpus/cpu@100: Missing clock-frequency property
[ 0.065007@0] /cpus/cpu@101: Missing clock-frequency property
[ 0.065020@0] /cpus/cpu@102: Missing clock-frequency property
[ 0.065034@0] /cpus/cpu@103: Missing clock-frequency property
[ 0.065647@0] Meson chip version = RevA (22:A - 82:0)
[ 0.066086@1] CPU1: Booted secondary processor
[ 0.066490@2] CPU2: Booted secondary processor
[ 0.066856@3] CPU3: Booted secondary processor
[ 0.067226@4] CPU4: Booted secondary processor
[ 0.067640@5] CPU5: Booted secondary processor
[ 0.068016@6] CPU6: Booted secondary processor
[ 0.068398@7] CPU7: Booted secondary processor
[ 0.068484@0] Brought up 8 CPUs
[ 0.068547@0] SMP: Total of 8 processors activated.
[ 0.069072@0] devtmpfs: initialized
[ 0.075698@2] sched: registering cpufreq notifiers for scale-invariant loads
[ 0.075741@2] instabooting: 0
[ 0.084066@2] cma: cma_init_reserved_areas, use_cma_first:1
[ 0.084148@2] pinctrl core: initialized pinctrl subsystem
[ 0.084707@2] regulator-dummy: no parameters
[ 0.085397@0] NET: Registered protocol family 16
[ 0.086823@2] ramoops: using module parameters
[ 0.087444@2] pstore: Registered ramoops as persistent store backend
[ 0.087465@2] ramoops: attached 0x100000@0x7300000, ecc: 0/0
[ 0.088242@0] aml_vdac_init: module init
[ 0.088396@3] register canvas platform driver
[ 0.088468@2] register rdma platform driver
[ 0.089711@2] vdso: 2 pages (1 code, 1 data) at base ffffffc001a74000
[ 0.090100@2] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.091057@2] software IO TLB [mem 0x62c00000-0x63000000] (4MB) mapped at [ffffffc062c00000-ffffffc062ffffff]
[ 0.091463@0] aml_i2c version: 20140813
[ 0.091660@0] i2c-core: driver [pmu4] using legacy resume method
[ 0.091762@2] codec_mm:codec_mm_module_init
[ 0.092125@3] gxbb_mpll_clk: register mpll_clk_out0 success done
[ 0.092139@3] gxbb_mpll_clk: register mpll_clk_out1 success done
[ 0.092151@3] gxbb_mpll_clk: register mpll_clk_out2 success done
[ 0.092357@3] clk_sys: register PLL sys_pll success done
[ 0.092375@3] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
[ 0.092384@3] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
[ 0.092394@3] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
[ 0.092403@3] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
[ 0.092412@3] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
[ 0.092421@3] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
[ 0.092430@3] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
[ 0.092439@3] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
[ 0.092447@3] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
[ 0.092481@3] gxl_clk: clock initialization complete
[ 0.092669@3] clkmsr: Gxl msr_clk_reg0=ffffff800003c75c,msr_clk_reg2=ffffff800003e764
[ 0.094937@2] aml_iomap: amlogic iomap probe done
[ 0.095491@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
[ 0.096318@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
[ 0.096774@3] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[ 0.096803@3] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[ 0.096972@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
[ 0.096994@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
[ 0.099264@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
[ 0.099276@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
[ 0.099285@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
[ 0.099295@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
[ 0.099304@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
[ 0.099313@0] dvfs [scpi_dvfs_get_opps] - buf.opp[5].freq_hz = 1200000000
[ 0.099323@0] dvfs [scpi_dvfs_get_opps] - buf.opp[6].freq_hz = 1512000000
[ 0.099332@0] dvfs [scpi_dvfs_get_opps] - new count 7, max_freq 1512000000
[ 0.101502@0] dvfs [scpi_dvfs_get_opps] - buf.opp[0].freq_hz = 100000000
[ 0.101513@0] dvfs [scpi_dvfs_get_opps] - buf.opp[1].freq_hz = 250000000
[ 0.101522@0] dvfs [scpi_dvfs_get_opps] - buf.opp[2].freq_hz = 500000000
[ 0.101532@0] dvfs [scpi_dvfs_get_opps] - buf.opp[3].freq_hz = 667000000
[ 0.101541@0] dvfs [scpi_dvfs_get_opps] - buf.opp[4].freq_hz = 1000000000
[ 0.101550@0] dvfs [scpi_dvfs_get_opps] - new count 5, max_freq 1000000000
[ 0.103350@0] codec_mm has 2 memory regions
[ 0.103399@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[ 0.103418@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.103516@2] codec_mm has 2 memory regions
[ 0.103536@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[ 0.103552@2] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.105395@3] vpu: driver version: v03
[ 0.105439@3] vpu: load vpu_clk: 666667000Hz(7)
[ 0.105523@0] vpu: vpu_probe OK
[ 0.106825@3] tv_vout: tvout_probe
[ 0.106847@3] tv_vout: chrdev devno 265289728 for disp
[ 0.106856@3] vout_notify: vout_register_server
[ 0.106863@3] tv_vout: register tv module server ok
[ 0.107124@2] tv_vout: create cdev tv
[ 0.107137@2] tv_vout: tvout_probe OK
[ 0.107631@2] canvas_probe reg=00000000c8838000,size=400
[ 0.107668@2] canvas maped reg_base =ffffff800009a000
[ 0.111352@0] rdma_probe
[ 0.331226@2] bio: create slab at 0
[ 0.332145@2] SCSI subsystem initialized
[ 0.332650@3] usbcore: registered new interface driver usbfs
[ 0.332741@0] usbcore: registered new interface driver hub
[ 0.332864@2] usbcore: registered new device driver usb
[ 0.333615@2] i2c-gpio i2c_gpio.40: using pins 172 (SDA) and 173 (SCL)
[ 0.333813@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.333825@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.333893@2] PTP clock support registered
[ 0.334385@3] hdmitx: system: amhdmitx_init
[ 0.334397@3] hdmitx: system: Ver: 2014May6
[ 0.334582@3] hdmitx: system: amhdmitx_probe
[ 0.334908@0] hdmitx: system: not find match init-data
[ 0.334954@0] hdmitx hpd irq = 89
[ 0.335520@3] hdmitx20: Mapped PHY: 0xc0800000
[ 0.335539@3] hdmitx20: Mapped PHY: 0xc1104400
[ 0.335564@3] hdmitx20: Mapped PHY: 0xc8100000
[ 0.335574@3] hdmitx20: Mapped PHY: 0xc8834000
[ 0.335583@3] hdmitx20: Mapped PHY: 0xc883a000
[ 0.335592@3] hdmitx20: Mapped PHY: 0xc883c000
[ 0.335604@3] hdmitx20: Mapped PHY: 0xd0100000
[ 0.335613@3] hdmitx20: Mapped PHY: 0xda83a000
[ 0.335629@3] hdmitx: alread display in uboot 0x10
[ 0.335671@3] avmute set to 1
[ 0.335959@3] vout_serve: vout_init_module
[ 0.336098@3] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 0.336111@3] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 0.336128@3] tv_vout: already display in uboot
[ 0.336137@3] vout_serve: vinfo mode is: 1080p60hz
[ 0.336146@3] vout_serve: init mode 1080p60hz
[ 0.336363@0] vout_serve: create_vout_fops OK
[ 0.336373@0] vout_serve: create vout attribute OK
[ 0.336381@0] vout_serve: meson_vout_probe OK
[ 0.336571@1] logo: logo_init
[ 0.336820@1] osd_rdma: osd_rdma_init: rdma_table p=0x67441000,op=0x67441000 , v=0xffffff800009e000
[ 0.336854@1] rdma_register, rdma_table_addr ffffff80000a9000 rdma_table_addr_phy 67442000 reg_buf ffffffc0103a6000
[ 0.336868@1] rdma_register success, handle 1 table_size 4096
[ 0.336877@1] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
[ 0.336901@1] rdma_register, rdma_table_addr ffffff80000b9000 rdma_table_addr_phy 67443000 reg_buf ffffffc0001a6000
[ 0.336914@1] rdma_register success, handle 2 table_size 4096
[ 0.336923@1] osd_rdma: osd_rdma_init:osd rdma handle = 2.
[ 0.337346@0] Advanced Linux Sound Architecture Driver Initialized.
[ 0.339409@0] Switched to clocksource arch_sys_counter
[ 0.342702@0] hdmitx: system: irq 80000002
[ 0.348360@0] FS-Cache: Loaded
[ 0.356947@0] NET: Registered protocol family 2
[ 0.357376@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.357501@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.357729@0] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.357799@0] TCP: reno registered
[ 0.357817@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.357865@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.358093@0] NET: Registered protocol family 1
[ 0.358648@3] pwm: probe ok
[ 0.358913@3] wifi: power_on_pin_OD = 0;
[ 0.358930@3] aml_wifi wifi.35: [wifi_dev_probe] no power_on_pin2
[ 0.358968@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm phandle val=31;pwm-channel1=4;pwm-channel2=12
[ 0.358983@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[0] = 30541
[ 0.358996@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[0] = 30518
[ 0.359008@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[1] = 15270
[ 0.359021@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[1] = 15259
[ 0.359034@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config1[2] = 6
[ 0.359046@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] pwm_config2[2] = 9
[ 0.359058@3] aml_wifi wifi.35: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.359085@3] aml_wifi wifi.35: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.359142@3] aml_wifi wifi.35: [wifi_dev_probe] dhd_static_buf setup
[ 0.359211@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
[ 0.359225@3] aml_wifi wifi.35: [wifi_dev_probe] interrupt_pin=241
[ 0.359236@3] aml_wifi wifi.35: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
[ 0.359248@3] aml_wifi wifi.35: [wifi_dev_probe] power_on_pin=240
[ 0.359259@3] aml_wifi wifi.35: [wifi_dev_probe] clock_32k_pin=0
[ 0.359549@1] aml_wifi wifi.35: [wifi_setup_dt] wifi_setup_dt
[ 0.359595@1] aml_wifi wifi.35: [wifi_setup_dt] interrupt_pin(241)
[ 0.359615@1] aml_wifi wifi.35: [wifi_setup_dt] power_on_pin(240)
[ 0.359805@3] Unpacking initramfs...
[ 0.411975@3] Freeing initrd memory: 1996K (ffffffc073cc2000 - ffffffc073eb5000)
[ 0.414836@1] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.423944@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.424426@0] msgmni has been set to 3613
[ 0.425529@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.425636@0] io scheduler noop registered
[ 0.425646@0] io scheduler deadline registered
[ 0.425674@0] io scheduler cfq registered (default)
[ 0.426515@1] meson-rng c8834000.rng: hwrng registered
[ 0.430111@3] loop: module loaded
[ 0.431901@3] tun: Universal TUN/TAP device driver, 1.6
[ 0.431924@3] tun: (C) 1999-2004 Max Krasnyansky
[ 0.556367@2] libphy: stmmac: probed
[ 0.556392@2] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 0.556403@2] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[ 0.556849@1] PPP generic driver version 2.4.2
[ 0.557114@0] NET: Registered protocol family 24
[ 0.557240@1] usbcore: registered new interface driver smsc95xx
[ 0.557586@2] platform c9000000.dwc3: Driver dwc3 requests probe deferral
[ 0.557712@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.557724@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[ 0.557934@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.558253@0] usbcore: registered new interface driver usb-storage
[ 0.558479@2] usbcore: registered new interface driver usbserial
[ 0.558563@0] usbcore: registered new interface driver usbserial_generic
[ 0.558648@1] usbserial: USB Serial support registered for generic
[ 0.558732@2] usbcore: registered new interface driver pl2303
[ 0.558811@0] usbserial: USB Serial support registered for pl2303
[ 0.559331@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000fa000
[ 0.559625@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[ 0.559700@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000fc080
[ 0.560045@2] mousedev: PS/2 mouse device common for all mice
[ 0.560257@1] i2c /dev entries driver
[ 0.561044@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 0.563289@0] cpu cpu4: bL_cpufreq_init: CPU 4 initialized
[ 0.564560@0] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 0.565000@1] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.565148@0] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.567173@0] usbcore: registered new interface driver usbhid
[ 0.567194@0] usbhid: USB HID core driver
[ 0.567369@1] ashmem: initialized
[ 0.567742@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fe4c0
[ 0.567778@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[ 0.567800@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[ 0.669481@0] hdmitx: plugin
[ 0.724300@0] EDID Parser:
[ 0.724559@0] dump_dtd_info[1762]
[ 0.724561@0] pixel_clock 13850
[ 0.724562@0] h_active 1920
[ 0.724563@0] h_blank 160
[ 0.724564@0] v_active 1080
[ 0.724565@0] v_blank 31
[ 0.724566@0] h_sync_offset 48
[ 0.724567@0] h_sync 32
[ 0.724568@0] v_sync_offset 3
[ 0.724569@0] v_sync 5
[ 0.724570@0] dump_dtd_info[1762]
[ 0.724571@0] pixel_clock 8475
[ 0.724572@0] h_active 1360
[ 0.724573@0] h_blank 416
[ 0.724574@0] v_active 768
[ 0.724575@0] v_blank 30
[ 0.724576@0] h_sync_offset 72
[ 0.724577@0] h_sync 136
[ 0.724578@0] v_sync_offset 3
[ 0.724579@0] v_sync 5
[ 0.724596@0] dump_dtd_info[1762]
[ 0.724597@0] pixel_clock 7425
[ 0.724598@0] h_active 1280
[ 0.724599@0] h_blank 384
[ 0.724600@0] v_active 720
[ 0.724601@0] v_blank 28
[ 0.724602@0] h_sync_offset 64
[ 0.724603@0] h_sync 128
[ 0.724604@0] v_sync_offset 3
[ 0.724605@0] v_sync 5
[ 0.724607@0] hdmitx: edid: find IEEEOUT
[ 0.724610@0] hdmitx: edid: check sum valid
[ 0.724611@0] hdmitx: edid: check sum valid
[ 0.724615@0] hdmitx: update RX hdr info 0
[ 0.724619@0] hdmitx: edid: check sum valid
[ 0.724620@0] hdmitx: edid: check sum valid
[ 0.724622@0] hdmitx: edid: blk0 raw data
[ 0.724654@0] 00ffffffffffff001e6d0100010101010114010380a05a780ad9b0a357499c25
[ 0.724654@0] 11494ba1080031404540614081809040d1c0010101011a3680a070381f403020
[ 0.724654@0] 3500e8263200001a1b2150a051001e3048883500bc862100001c000000fd0038
[ 0.724654@0] 3e1c5312000a202020202020000000fc004c472054560a2020202020202001e2
[ 0.724654@0]
[ 0.724654@0]
[ 0.724655@0] hdmitx: edid: blk1 raw data
[ 0.724686@0] 020329f1510102030607151611121384140520221f1026150750097f0767030c
[ 0.724686@0] 002000b82de3050301011d008051d01c2040803500bc882100001e4e1f008051
[ 0.724686@0] 001e3040803700bc8821000018023a801871382d40582c450006442100001e01
[ 0.724686@0] 1d8018711c1620582c2500c48e2100009e0000000000000000000000000000a4
[ 0.724686@0]
[ 0.724686@0]
[ 0.724707@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[ 0.724713@0] hdmitx: video: get current mode: 1080p60hz
[ 0.724714@0] hdmitx: update rx hdr info 0
[ 0.724715@0] hdmitx: update physcial size: 1600 900
[ 0.724732@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
[ 0.724737@0] hdmtix: set audio
[ 0.724746@0] hdmitx tx_aud_src = 0
[ 0.724771@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148500
[ 0.724772@0] hdmitx aud_n_para = 6144
[ 0.724789@0] hdmitx set channel status
[ 2.445345@4] console [ttyS0] enabled
[ 2.449369@3] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800010a4c0
[ 2.456039@3] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[ 2.465861@1] meson-gpu-clkgen c883c000.gpu_clk: can't request region for resource [mem 0xc883c000-0xc883cfff]
[ 2.475373@1] meson-gpu-clkgen: probe of c883c000.gpu_clk failed with error -16
[ 2.482808@1] hdmitx: system: hdmitx_hdcp_init
[ 2.487585@2] aml_vrtc rtc.34: rtc core: registered aml_vrtc as rtc0
[ 2.493673@2] secmon has 1 memory regions
[ 2.497183@2] secmon: share in base: 0xffffff800011c000, share out base: 0xffffff800011e000
[ 2.505452@2] secmon secmon.4: assigned reserved memory node linux,secmon ok
[ 2.512418@2] secmon: probe done
[ 2.515996@3] storage: storage in base: 0xffffff8001800000
[ 2.521053@3] storage: storage out base: 0xffffff8001880000
[ 2.526557@3] storage: storage block base: 0xffffff8001900000
[ 2.532254@3] storage: probe done!
[ 2.536159@2] aml_sd_emmc_probe: line 3594
[ 2.539687@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[ 2.549677@2] aml_sd_emmc_reg_init 1149
[ 2.552916@2] get property: ocr_avail, value:0x00200080
[ 2.559334@2] get property: f_min, value:300000
[ 2.565473@2] get property: f_max, value:100000000
[ 2.571849@2] get property: max_req_size, value:0x00020000
[ 2.578314@2] get property: pinname, str:emmc
[ 2.584096@2] get property: card_type, value:1
[ 2.589793@2] get property: gpio_dat3, str:
[ 2.595215@2] get property: hw_reset, str:
[ 2.600681@2] emmc:pdata->caps = c0000d47
[ 2.604618@2] emmc:pdata->caps2 = 18060
[ 2.608410@2] emmc:pdata->pm_caps = 0
[ 2.612054@2] storage 1, boot 1
[ 2.615136@2] get_storage_dev return 1
[ 2.649418@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.649648@3] aml_sd_emmc_probe: line 3594
[ 2.654135@3] aml_sd_emmc_reg_init 1149
[ 2.657526@3] get property: ocr_avail, value:0x00200080
[ 2.663953@3] get property: f_min, value:400000
[ 2.670068@3] get property: f_max, value:100000000
[ 2.676445@3] get property: max_req_size, value:0x00020000
[ 2.682919@3] get property: irq_in, value:3
[ 2.688605@3] get property: irq_out, value:5
[ 2.694319@3] get property: gpio_cd, str:
[ 2.699745@3] get property: pinname, str:sd
[ 2.705340@3] get property: jtag_pin, str:
[ 2.710780@3] get property: card_type, value:5
[ 2.716464@3] get property: card_in_delay, value:400
[ 2.722337@3] get property: gpio_dat3, str:
[ 2.727774@3] sd:pdata->caps = 7
[ 2.730959@3] sd:pdata->caps2 = 0
[ 2.734231@3] sd:pdata->pm_caps = 0
[ 2.769698@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.769927@3] aml_sd_emmc_probe: line 3594
[ 2.774429@3] aml_sd_emmc_reg_init 1149
[ 2.777793@3] get property: ocr_avail, value:0x00200080
[ 2.784245@3] get property: f_min, value:400000
[ 2.790343@3] get property: f_max, value:200000000
[ 2.796720@3] get property: max_req_size, value:0x00020000
[ 2.803197@3] get property: pinname, str:sdio
[ 2.808967@3] get property: card_type, value:3
[ 2.814691@3] sdio:pdata->caps = 78107
[ 2.818368@3] sdio:pdata->caps2 = 0
[ 2.821823@3] sdio:pdata->pm_caps = 1
[ 2.836137@1] emmc: BKOPS_EN bit is not set
[ 2.845285@1] emmc: trying cali 0-th time(s)
[ 2.857426@1] emmc: delay[0]= 4800 padding= 1, bidx=4
[ 2.857453@1] emmc: delay[1]= 4600 padding= 2, bidx=4
[ 2.859417@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.859771@0] ion_dev has 1 memory regions
[ 2.871686@1] emmc: delay[2]= 4600 padding= 2, bidx=4
[ 2.876674@1] emmc: delay[3]= 5000 padding= 5, bidx=0
[ 2.881463@3] fb: osd_init_module
[ 2.881595@3] fb: viu vsync irq: 35
[ 2.881601@3] fb: failed to init reserved memory
[ 2.881618@3] fb: osd_probe vinfo:ffffffc001ad1f00
[ 2.881623@3] fb: init fbdev bpp is:32
[ 2.901440@1] emmc: delay[4]= 5000 padding= 5, bidx=0
[ 2.906433@1] emmc: delay[5]= 4800 padding= 1, bidx=4
[ 2.906440@1] emmc: delay[6]= 4800 padding= 1, bidx=4
[ 2.906443@1] emmc: delay[7]= 5200 padding= 4, bidx=0
[ 2.906446@1] emmc: calibration result @ 0: max(5200), min(4600)
[ 2.906449@1] emmc: line_delay =0x2211332, max_cal_result =5200
[ 2.906451@1] emmc: base_index_max 0, base_index_min 0
[ 2.906457@1] emmc: clk 100000000 SDR mode tuning start
[ 2.907212@1] emmc: rx_tuning_result[0] = 10
[ 2.907743@1] emmc: rx_tuning_result[1] = 10
[ 2.908278@1] emmc: rx_tuning_result[2] = 10
[ 2.908813@1] emmc: rx_tuning_result[3] = 10
[ 2.909349@1] emmc: rx_tuning_result[4] = 10
[ 2.910021@1] emmc: rx_tuning_result[5] = 10
[ 2.911335@2] emmc: rx_tuning_result[6] = 10
[ 2.912635@2] emmc: rx_tuning_result[7] = 10
[ 2.913863@2] emmc: rx_tuning_result[8] = 10
[ 2.913993@2] emmc: best_win_start =0, best_win_size =9
[ 2.913996@2] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x42000
[ 2.914002@2] emmc: gclock =0x100024a, gdelay=0x2211332, gadjust=0x42000
[ 2.914653@2] emmc: new HS200 MMC card at address 0001
[ 2.915446@2] emmc: clock 100000000, 8-bit-bus-width
[ 2.915446@2]
[ 2.915446@2] mmcblk0: emmc:0001 NCard 14.4 GiB
[ 2.915696@2] mmcblk0boot0: emmc:0001 NCard partition 1 4.00 MiB
[ 2.915925@2] mmcblk0boot1: emmc:0001 NCard partition 2 4.00 MiB
[ 2.916144@2] mmcblk0rpmb: emmc:0001 NCard partition 3 4.00 MiB
[ 2.917407@1] mmcblk0: unknown partition table
[ 2.918703@2] [mmc_read_partition_tbl] mmc read partition OK!
[ 2.918705@2] add_emmc_partition
[ 2.919057@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 2.919283@2] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 2.919590@2] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
[ 2.919815@0] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
[ 2.920045@2] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
[ 2.920248@0] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
[ 2.920463@2] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
[ 2.920681@0] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
[ 2.920883@2] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
[ 2.921085@0] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
[ 2.921312@2] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
[ 2.921523@0] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
[ 2.921726@2] [mmcblk0p13] system offset 0x000057400000, size 0x000080000000
[ 2.921934@0] [mmcblk0p14] data offset 0x0000d7c00000, size 0x0002c5400000
[ 2.921987@0] card key: card_blk_probe.
[ 2.921992@0] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
[ 2.921996@0] emmc key: emmc_key_init:552 ok.
[ 2.926985@0] amlmmc_dtb_init: register dtb chardev
[ 2.926986@0] calc 5bd1cbaa, store 61205d73
[ 2.926989@0] cpy 1 is not valid
[ 2.931839@0] calc eb5719af, store 28008050
[ 2.931842@0] cpy 0 is not valid
[ 2.931843@0] total valid 0
[ 2.932606@2] amlmmc_dtb_init: register dtb chardev OK
[ 2.932607@2] Exit aml_emmc_partition_ops OK.
[ 2.934612@0] mmcblk0boot1: unknown partition table
[ 2.936243@0] mmcblk0boot0: unknown partition table
[ 2.936693@2] clear_emmc_wait_flag
[ 3.170421@4] [aml_is_card_insert] card IN
[ 3.230347@7] fb: set osd0 reverse as NONE
[ 3.241592@3] fb: osd probe OK
[ 3.242057@3] ge2d: ge2d_init_module
[ 3.242601@3] ge2d: ge2d_dev major:241
[ 3.246857@3] ge2d: ge2d clock is 400 MHZ
[ 3.250295@3] ge2d: ge2d: pdev=ffffffc00025c200, irq=182, rstc=0xffffffc06269ae40, clk=ffffffc000214400
[ 3.259650@3] ge2d: mapped phy: 0xd0160000
[ 3.263639@3] ge2d: ge2d start monitor
[ 3.267427@1] ge2d: ge2d workqueue monitor start
[ 3.267959@0] codec:Amlogic A/V streaming port init
[ 3.270123@3] codec:get gate demux control ok ffffffc062699a80
[ 3.270129@3] codec:get gate parser_top control ok ffffffc062699b00
[ 3.270133@3] codec:get gate vpu_intr control ok ffffffc062699b80
[ 3.270138@3] codec:get gate vdec control ok ffffffc062699c00
[ 3.271149@3] codec:[tsync_pcr_init]init success.
[ 3.271348@3] codec:amvideocap_probe,amvideocap
[ 3.271352@3] codec:use cma buf.
[ 3.273561@4] normal card in
[ 3.274128@3] codec:vdec_request_irq ffffffc00153fe48, vsync
[ 3.274464@0] codec:create_ge2d_work_queue video task ok
[ 3.326651@3] rdma_register, rdma_table_addr ffffff8000256000 rdma_table_addr_phy 67450000 reg_buf ffffffc062750000
[ 3.336874@3] rdma_register success, handle 3 table_size 32768
[ 3.342645@3] video_rdma:rdma_init video rdma handle = 3.
[ 3.347989@3] codec:used fix clk for vdec clk source!
[ 3.352996@3] codec:register clk_set_setting cpu[34]
[ 3.358535@0] DI: di_module_init ok.
[ 3.361458@0] DI: di_module_init: major 237
[ 3.365784@3] DI: di_probe
[ 3.368403@3] deinterlace has 1 memory regions
[ 3.372695@3] DI: di reveser memory 0x7d300000, size 30MB.
[ 3.372704@3] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[ 3.380260@3] DI-di_probe: get flag_cma error.
[ 3.384914@3] di_irq:78,timerc_irq:38
[ 3.388519@3] rdma_register, rdma_table_addr ffffff800017d000 rdma_table_addr_phy 6744a000 reg_buf ffffffc062066000
[ 3.398793@3] rdma_register success, handle 4 table_size 8192
[ 3.404341@3] DI: di_probe allocate rdma channel 4.
[ 3.409141@3] DI: DI hw version 2.
[ 3.412532@3] 0x000000db:Y=db,U=0,V=0
[ 3.416122@3] 0x000000dc:Y=dc,U=0,V=0
[ 3.419821@3] 0x000000dd:Y=dd,U=0,V=0
[ 3.423367@3] 0x000000de:Y=de,U=0,V=0
[ 3.426990@3] 0x000000df:Y=df,U=0,V=0
[ 3.430642@3] 0x000000e0:Y=e0,U=0,V=0
[ 3.434235@3] 0x000000e1:Y=e1,U=0,V=0
[ 3.437857@3] 0x000000e2:Y=e2,U=0,V=0
[ 3.441508@3] 0x000000e3:Y=e3,U=0,V=0
[ 3.445102@3] 0x000000f0:Y=f0,U=0,V=0
[ 3.448728@3] 0x000000f1:Y=f1,U=0,V=0
[ 3.452356@3] 0x000000f2:Y=f2,U=0,V=0
[ 3.455970@3] 0x000000f3:Y=f3,U=0,V=0
[ 3.459603@3] 0x000000f4:Y=f4,U=0,V=0
[ 3.463215@3] 0x000000f5:Y=f5,U=0,V=0
[ 3.466837@3] 0x000000f6:Y=f6,U=0,V=0
[ 3.470475@3] 0x000000f7:Y=f7,U=0,V=0
[ 3.474083@3] 0x000000f8:Y=f8,U=0,V=0
[ 3.477705@3] 0x000000f9:Y=f9,U=0,V=0
[ 3.481340@3] 0x000000fa:Y=fa,U=0,V=0
[ 3.484950@3] 0x000000fb:Y=fb,U=0,V=0
[ 3.488572@3] 0x000000fc:Y=fc,U=0,V=0
[ 3.493047@3] efusekeynum: 4
[ 3.495052@3] efusekeyname: mac offset: 0 size: 6
[ 3.501462@3] efusekeyname: mac_bt offset: 6 size: 6
[ 3.507810@3] efusekeyname: mac_wifi offset: 12 size: 6
[ 3.514202@3] efusekeyname: usid offset: 18 size: 16
[ 3.521101@2] efuse efuse.10: probe OK!
[ 3.524851@3] key unify config unifykey-num is 14
[ 3.529073@3] key unify fact unifykey-num is 14
[ 3.533532@3] aml_unifykeys_probe:1280=============unifykey_devno:eb00000
[ 3.536835@0] sd: new high speed SDHC card at address aaaa
[ 3.537531@2] sd: clock 50000000, 4-bit-bus-width
[ 3.537531@2]
[ 3.537532@2] mmcblk1: sd:aaaa SL16G 14.8 GiB
[ 3.539807@0] mmcblk1: p1 p2
[ 3.559882@3] 6unifykey: device unifykeys created ok
[ 3.564552@3] 6aml_unifykeys_init done!
[ 3.568270@3] PPMGRDRV: warn: ppmgr module init func called
[ 3.574063@3] PPMGRDRV: err: ppmgr_driver_probe called
[ 3.578879@3] ppmgr has 1 memory regions
[ 3.582889@3] PPMGRDRV: info: ppmgr_dev major:234
[ 3.587927@3] PPMGRDRV: info: ppmgr_probe done
[ 3.592470@2] amlogic rfkill init
[ 3.595210@2] enter bt_probe of_node
[ 3.598667@2] not get gpio_en
[ 3.601629@2] power on valid level is high
[ 3.605443@2] bt: power_on_pin_OD = 0;
[ 4.030927@2] audio_dsp: [dsp]register dsp to char divece(257)
[ 4.038145@2] amaudio: amaudio: driver amaudio succuess!
[ 4.039003@2] vdin_drv_init: major 233
[ 4.044316@3] rdma_register, rdma_table_addr ffffff800018b000 rdma_table_addr_phy 6744c000 reg_buf ffffffc062799800
[ 4.052203@3] rdma_register success, handle 5 table_size 512
[ 4.057620@3] vdin_drv_probe:vdin.0 rdma hanld 5.
[ 4.064209@2]
[ 4.064209@2] vdin memory resource undefined!!
[ 4.068415@2] vdin0 cma_mem_size = 16 MB
[ 4.072309@2] vdin0 irq: 115 rdma irq: 2
[ 4.076249@2] vdin_drv_probe: fclk_div5 is 400 MHZ
[ 4.080971@2] vdin_drv_probe: vdin[0] clock is 50 MHZ
[ 4.086413@2] vdin_drv_probe: driver initialized ok
[ 4.091132@2] rdma_register, rdma_table_addr ffffff800018d000 rdma_table_addr_phy 6744d000 reg_buf ffffffc06206f200
[ 4.101145@2] rdma_register success, handle 6 table_size 512
[ 4.106678@2] vdin_drv_probe:vdin.1 rdma hanld 6.
[ 4.111976@3] vdin1 has 1 memory regions
[ 4.115291@3] vdin vdin1.28: assigned reserved memory node linux,vdin1_cma ok
[ 4.122314@3]
[ 4.122314@3] vdin memory resource done.
[ 4.127901@3] vdin1 cma_mem_size = 16 MB
[ 4.131823@3] vdin1 irq: 117 rdma irq: 4
[ 4.135742@3] vdin_drv_probe: fclk_div5 is 400 MHZ
[ 4.140429@3] vdin_drv_probe: vdin[1] clock is 50 MHZ
[ 4.145913@2] vdin_drv_probe: driver initialized ok
[ 4.150648@2] vdin_drv_init: vdin driver init done
[ 4.154986@2] tvafe_drv_init: major 232
[ 4.159647@2] tvafe: tvafe_init.
[ 4.162634@3] [RX]-hdmirx: hdmirx_init.
[ 4.165762@3] ESM HLD: Initializing...
[ 4.169503@3] ESM HLD: Registering device range 'esm_rx'...
[ 4.175010@3] ESM HLD: Device range 'esm_rx' has been registered.
[ 4.181034@3] ESM HLD: Creating class /sys/class/elliptic_rx...
[ 4.187110@3] ESM HLD: The class /sys/class/elliptic_rx has been created.
[ 4.193658@3] ESM HLD: Creating device 'esm_rx'...
[ 4.198707@2] ESM HLD: Device 'esm_rx' has been created.
[ 4.203638@2] ESM HLD: Done initializing the HLD driver.
[ 4.208884@2] module init
[ 4.211748@2]
[ 4.211748@2] VECM probe start
[ 4.216801@3] dolby_vision_init_receiver(dvel)
[ 4.220658@3] dolby_vision_init_receiver: dvel
[ 4.225010@3] aml_vecm_probe: ok
[ 4.228937@2] saradc c1108680.saradc: initialized by BL30
[ 4.233634@2] saradc c1108680.saradc: calibration start:
[ 4.238857@2] saradc c1108680.saradc: nominal=0, value=5
[ 4.244137@2] saradc c1108680.saradc: nominal=256, value=251
[ 4.249734@2] saradc c1108680.saradc: nominal=512, value=500
[ 4.255329@2] saradc c1108680.saradc: nominal=768, value=750
[ 4.260949@2] saradc c1108680.saradc: nominal=1023, value=1000
[ 4.266671@2] saradc c1108680.saradc: calibration end: coef=4202
[ 4.273085@3] remote: Driver init
[ 4.276058@3] remote: platform_data g_remote_ao_offset=580
[ 4.281383@3] remote: platform_data irq =228
[ 4.285643@3] remote: set drvdata completed
[ 4.289815@3] remote: device_create_file completed
[ 4.295158@3] input: aml_keypad as /devices/meson-remote.12/input/input0
[ 4.301935@2] remote: input_register_device completed
[ 4.306633@2] remote: set_remote_mode[78]
[ 4.310608@2] remote: remote config major:229
[ 4.315307@3] remote: physical address:0x62794000
[ 4.320252@2] gpio-key gpio_keypad.50: gpio_key: 0 name(power) pin()
[ 4.325842@2] gpio-key gpio_keypad.50: amlogic_gpio_name_map_num pin 0!::
[ 4.332650@2] gpio-key gpio_keypad.50: gpio_key: 0 power(147)
[ 4.338345@2] gpio-key gpio_keypad.50: start setup_timer
[ 4.343556@2] gpio-key gpio_keypad.50: power key(116) registed.
[ 4.349828@2] input: gpio_keypad as /devices/gpio_keypad.50/input/input1
[ 4.356320@3] gpio-key gpio_keypad.50: gpio keypad register input device completed.
[ 4.363648@3] input input1: gpio keypad major:228
[ 4.368956@3] cpuinfo: probe done
[ 4.373116@3] input: cec_input as /devices/virtual/input/input2
[ 4.377908@3] cectx aocec: aml_cec_probe(): no hdmirx reg resource
[ 4.383569@3] cectx aocec: aml_cec_probe(): no hhi reg resource
[ 4.389585@3] cectx aocec: aml_cec_probe(): can't find hdmirx
[ 4.396233@3] cec: wake up flag:0
[ 4.400911@3] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[ 4.407644@2] aml-i2s-dai I2S.42: I2S Mic is in platform!
[ 4.411190@2] aml_pcm_dai: pcm mode detection =1
[ 4.439455@2] input input1: key 116 up
[ 4.621026@2] aml_snd_card: headphone detection disable=1
[ 4.621250@2] aml_snd_card: no spk event delay time set
[ 4.630744@2] aml_snd_m8_card aml_m8_snd.49: T9015-audio-hifi <-> I2S.42 mapping ok
[ 4.637247@2] aml_snd_m8_card aml_m8_snd.49: dit-hifi <-> SPDIF.43 mapping ok
[ 4.641475@2] aml_pcm: enter aml_pcm_new dai->name: PCM.44 dai->id: 0
[ 4.648415@2] aml_snd_m8_card aml_m8_snd.49: pcm2bt-pcm <-> PCM.44 mapping ok
[ 4.654668@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTL
[ 4.661962@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[ 4.670736@2] aml_snd_m8_card aml_m8_snd.49: ASoC: no source widget found for LOUTR
[ 4.678219@2] aml_snd_m8_card aml_m8_snd.49: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[ 4.690374@2] TCP: cubic registered
[ 4.694347@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
[ 4.694866@3] NET: Registered protocol family 10
[ 4.695930@2] NET: Registered protocol family 17
[ 4.695974@2] Key type dns_resolver registered
[ 4.697543@2] Registering SWP/SWPB emulation handler
[ 4.698665@3] regulator-dummy: disabling
[ 5.426161@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.426243@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.434917@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
[ 5.440164@3] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.446906@3] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.454250@3] usb usb1: Product: xHCI Host Controller
[ 5.459240@3] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
[ 5.464876@3] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 5.471655@3] hub 1-0:1.0: USB hub found
[ 5.473761@3] hub 1-0:1.0: 3 ports detected
[ 5.478169@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.483524@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.491391@3] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.498140@3] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.505484@3] usb usb2: Product: xHCI Host Controller
[ 5.510484@3] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
[ 5.516079@3] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 5.523180@1] hub 2-0:1.0: USB hub found
[ 5.525020@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.534400@7] console [netcon0] enabled
[ 5.536014@7] netconsole: network logging started
[ 5.540998@7] aml_vrtc rtc.34: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[ 5.558122@7] hdmirx_ext: [hdmiin_drv_init] ver: Jul042016.1
[ 5.559812@7] gxbb_pm: enter meson_pm_probe!
[ 5.562688@7] gxbb_pm: meson_pm_probe done
[ 5.570634@1] cpucore_cooling_register, max_cpu_core_num:4
[ 5.572131@1] cpucore_cooling_register, max_cpu_core_num:4
[ 5.592734@0] aml_istbt_dev_ready NULL
[ 5.592806@0] ALSA device list:
[ 5.593970@0] #0: AML-M8AUDIO
[ 5.597628@0] Freeing unused kernel memory: 904K (ffffffc001988000 - ffffffc001a6a000)
[ 5.643234@1] fb: use ion buffer for fb memory
[ 5.643940@1] meson-fb meson-fb.16: create ion_client ffffffc062846a80, handle=ffffffc062098b00
[ 5.643949@1] meson-fb meson-fb.16: ion memory(0): created fb at 0x0000000079300000, size 24 MiB
[ 5.643955@1] fb: Frame buffer memory assigned at
[ 5.643961@1] fb: 0, phy: 0x0000000079300000, vir:0xffffff8001cf5000, size=24900K
[ 5.643961@1]
[ 5.643970@1] fb: ---------------clear fb0 memory ffffff8001cf5000
[ 5.653944@1] fb: osd[0] canvas.idx =0x40
[ 5.653950@1] fb: osd[0] canvas.addr=0x79300000
[ 5.653955@1] fb: osd[0] canvas.width=7680
[ 5.653959@1] fb: osd[0] canvas.height=3240
[ 5.653964@1] fb: osd[0] frame.width=1920
[ 5.653968@1] fb: osd[0] frame.height=1080
[ 5.658334@0] fb: osd[0] canvas.idx =0x40
[ 5.658336@0] fb: osd[0] canvas.addr=0x79300000
[ 5.658338@0] fb: osd[0] canvas.width=7680
[ 5.658340@0] fb: osd[0] canvas.height=2160
[ 5.658341@0] fb: osd[0] frame.width=1920
[ 5.658343@0] fb: osd[0] frame.height=1080
[ 5.679226@3] fb: use ion buffer for fb memory
[ 5.679689@3] meson-fb meson-fb.16: create ion_client ffffffc062846a80, handle=ffffffc0620e7480
[ 5.679714@3] meson-fb meson-fb.16: ion memory(1): created fb at 0x000000007ab51000, size 1 MiB
[ 5.679725@3] fb: Frame buffer memory assigned at
[ 5.679739@3] fb: 1, phy: 0x000000007ab51000, vir:0xffffff8003547000, size=1024K
[ 5.679739@3]
[ 5.679755@3] fb: fb1 open, logo index:1
[ 5.708844@5] codec:free_alloced_keep_buffer (null). (null). (null)
[ 5.710105@5] vfm_map_store:rm default
[ 5.710105@5]
[ 5.710689@5] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 5.710689@5]
[ 5.711465@5] fb: osd[0] enable: 1 (platform_init)
[ 5.725741@5] fb: osd[1] enable: 0 (platform_init)
[ 5.789475@5] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[ 5.791619@3] Console: switching to colour frame buffer device 240x67
[ 5.829184@3] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[ 5.929369@1] dwc_otg: Core Release: 3.10a
[ 5.929379@1] dwc_otg: Setting default values for core params
[ 5.929394@1] dwc_otg: curmode: 0, host_only: 0
[ 5.932464@5] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[ 5.932475@5] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.932482@5] usb 1-1: Product: USB Receiver
[ 5.932489@5] usb 1-1: Manufacturer: Logitech
[ 5.941598@1] dwc_otg: Using Buffer DMA mode
[ 5.941608@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 5.941612@1] dwc_otg: Working on port type = SLAVE
[ 5.941618@1] dwc_otg: Dedicated Tx FIFOs mode
[ 5.958001@7] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1/input2
[ 6.012257@3] input: Logitech Unifying Device. Wireless PID:4008 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input3
[ 6.012849@3] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-xhci-hcd.0.auto-1:1
[ 6.014555@3] input: Logitech Unifying Device. Wireless PID:4003 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input4
[ 6.014944@3] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-xhci-hcd.0.auto-1:2
[ 6.016153@3] input: Logitech Unifying Device. Wireless PID:4013 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input5
[ 6.016675@3] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4013] on usb-xhci-hcd.0.auto-1:3
[ 6.018380@3] input: Logitech Unifying Device. Wireless PID:4008 as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0007/input/input6
[ 6.019091@3] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4008] on usb-xhci-hcd.0.auto-1:4
[ 6.289507@5] usb 1-2: new full-speed USB device number 3 using xhci-hcd
[ 6.437779@4] usb 1-2: config 1 interface 2 altsetting 0 endpoint 0x5 has an invalid bInterval 0, changing to 32
[ 6.440844@4] usb 1-2: New USB device found, idVendor=0c40, idProduct=7a17
[ 6.440857@4] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.440863@4] usb 1-2: Product: SAGE AirMouse
[ 6.460035@7] input: SAGE AirMouse as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:0C40:7A17.0008/input/input7
[ 6.460590@7] hid-generic 0003:0C40:7A17.0008: input,hidraw5: USB HID v1.11 Mouse [SAGE AirMouse] on usb-xhci-hcd.0.auto-2/input0
[ 6.464668@7] input: SAGE AirMouse as /devices/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.1/0003:0C40:7A17.0009/input/input8
[ 6.465047@7] hid-generic 0003:0C40:7A17.0009: input,hidraw6: USB HID v1.11 Keyboard [SAGE AirMouse] on usb-xhci-hcd.0.auto-2/input1
[ 6.468681@7] hid-generic 0003:0C40:7A17.000A: hiddev0,hidraw7: USB HID v1.11 Device [SAGE AirMouse] on usb-xhci-hcd.0.auto-2/input2
[ 7.141647@4] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[ 7.142166@5] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[ 7.152185@6] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 13.277738@3] systemd[1]: System time before build time, advancing clock.
[ 13.286415@3] random: systemd urandom read with 122 bits of entropy available
[ 13.290500@3] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 13.290905@3] systemd[1]: Detected architecture arm64.
[ 13.291124@3] systemd[1]: Set hostname to .
[ 13.371653@3] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.372156@3] systemd[1]: Listening on udev Control Socket.
[ 13.372517@3] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.373247@3] systemd[1]: Created slice System Slice.
[ 13.374903@3] systemd[1]: Mounting Debug File System...
[ 13.376611@3] systemd[1]: Mounting Variable Directory...
[ 13.378788@3] systemd[1]: Starting Debug Shell on /dev/ttyS0...
[ 13.379493@3] systemd[1]: Listening on udev Kernel Socket.
[ 13.379982@3] systemd[1]: Created slice User and Session Slice.
[ 13.380145@3] systemd[1]: Reached target Slices.
[ 13.380424@3] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.380799@3] systemd[1]: Listening on Journal Socket.
[ 13.381304@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 13.381307@3] systemd[1]: Reached target Swap.
[ 13.383026@3] systemd[1]: Mounting Temporary Directory...
[ 13.385076@3] systemd[1]: Starting Show Version...
[ 13.385634@3] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 13.385818@3] systemd[1]: Reached target RPC Port Mapper.
[ 13.387652@3] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.389584@3] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.390097@3] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.390316@3] systemd[1]: Reached target Paths.
[ 13.392190@3] systemd[1]: Starting Samba Configuration...
[ 13.394147@3] systemd[1]: Starting Setup machine-id...
[ 13.400439@3] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.407255@3] systemd[1]: Starting Load Kernel Modules...
[ 13.412834@3] systemd[1]: Mounted Debug File System.
[ 13.413015@3] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.413108@3] systemd[1]: Mounted Variable Directory.
[ 13.413185@3] systemd[1]: Mounted Temporary Directory.
[ 13.415380@3] systemd[1]: Started Debug Shell on /dev/ttyS0.
[ 13.415566@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 13.416647@3] systemd[1]: Started Show Version.
[ 13.417762@3] systemd[1]: Started Remount Root and Kernel File Systems.
[ 13.418940@3] systemd[1]: Started Samba Configuration.
[ 13.419769@3] systemd[1]: Started Setup machine-id.
[ 13.420464@3] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 13.423859@3] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.425656@3] systemd[1]: Starting Journal Service...
[ 13.430321@3] systemd[1]: Starting udev Coldplug all Devices...
[ 13.435590@3] systemd[1]: Starting Setup Timezone data...
[ 13.441802@1] media: Linux media interface: v0.10
[ 13.444139@6] systemd[1]: Started Create Static Device Nodes in /dev.
[ 13.445005@6] systemd[1]: Reached target Local File Systems (Pre).
[ 13.445302@6] systemd[1]: Reached target Local File Systems.
[ 13.449322@2] systemd[1]: Started Setup Timezone data.
[ 13.449637@2] Linux video capture interface: v2.00
[ 13.449649@2] WARNING: You are using an experimental version of the media stack.
[ 13.449649@2] As the driver is backported to an older kernel, it doesn't offer
[ 13.449649@2] enough quality for its usage in production.
[ 13.449649@2] Use it with care.
[ 13.449649@2] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 13.449649@2] a83dbc951051ded0ec728f65cc918b7320600b55 Remove unused stv6120 headers.
[ 13.456500@1] amlvid:err: amlvideo_init called
[ 13.456509@1] amlvid:err: amlvideo_create_instance called
[ 13.456518@1] amlvid:err: v4l2_dev.name=:amlvideo-000
[ 13.456796@2] amlvideo-000: V4L2 device registered as video10
[ 13.458419@1] systemd[1]: Started Load Kernel Modules.
[ 13.460402@1] systemd[1]: Starting Apply Kernel Variables...
[ 13.462391@1] systemd[1]: Mounting Configuration File System...
[ 13.468087@1] systemd[1]: Mounted Configuration File System.
[ 13.477973@1] systemd[1]: Started Apply Kernel Variables.
[ 13.543589@3] systemd[1]: Started Journal Service.
[ 13.561852@0] systemd-journald[1984]: Received request to flush runtime journal from PID 1
[ 13.699502@0] random: nonblocking pool is initialized
[ 14.290723@6] Console: switching to colour dummy device 80x25
[ 14.298747@1] Triggered SDIO WiFi power on and bus rescan.
[ 14.298784@1] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240
[ 14.337735@0] remote: cur_mode = 0
[ 14.337756@0] remote: set_remote_mode[78]
[ 14.465880@1] ftrace: Allocated trace_printk buffers
[ 14.470877@2] mali d00c0000.t82x: Continuing without Mali regulator control
[ 14.470966@2] mali d00c0000.t82x: set min pp to default 1
[ 14.470973@2] mali d00c0000.t82x: set min clk default to 0
[ 14.471039@2] mali d00c0000.t82x: dvfs table is 5
[ 14.471046@2] mali d00c0000.t82x: dvfs table addr ffffffc062b59218, ele size=48
[ 14.471051@2] mali d00c0000.t82x: max clk set 3
[ 14.471056@2] mali d00c0000.t82x: turbo clk set to 4
[ 14.471061@2] mali d00c0000.t82x: default clk set to 4
[ 14.471144@2] mali_plat=ffffffbffc106760
[ 14.485678@2] gpu cooling register okay with err=0
[ 14.487699@2] gpu core cooling register okay with err=0
[ 14.487850@2] gpu_power_main, 63
[ 14.488214@2] mali d00c0000.t82x: GPU identified as 0x0820 r1p0 status 0
[ 14.492322@2] mali d00c0000.t82x: Probed as mali0
[ 14.599508@1] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240
[ 14.687881@5] 8021q: 802.1Q VLAN Support v1.8
[ 14.910651@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
[ 14.910666@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 14.910705@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 14.911760@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
[ 14.911774@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 14.911818@6] aml_sd_emmc_data_thread 2639 sdio: cmd:52
[ 14.916549@0] [aml_sd_emmc_irq] sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
[ 14.916562@6] [aml_host_bus_fsm_show] sdio: err: wait for irq service, bus_fsm:0x8
[ 14.916602@6] aml_sd_emmc_data_thread 2639 sdio: cmd:8
[ 14.946718@4] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
[ 14.959804@4] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
[ 14.965169@4] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
[ 14.966259@4] sdio: queuing unknown CIS tuple 0x14 (0 bytes)
[ 14.969098@4] sdio: clk 200000000 SDR mode tuning start
[ 14.969373@4] sdio: rx_tuning_result[1] = 10
[ 14.969825@4] sdio: rx_tuning_result[2] = 10
[ 14.970056@4] sdio: rx_tuning_result[3] = 10
[ 14.970281@4] sdio: rx_tuning_result[4] = 10
[ 14.970288@4] sdio: best_win_start =1, best_win_size =4
[ 14.970294@4] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x32000
[ 14.970306@4] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x32000
[ 14.971495@4] sdio: queuing unknown CIS tuple 0x80 (1 bytes)
[ 14.971562@4] sdio: queuing unknown CIS tuple 0x81 (1 bytes)
[ 14.971626@4] sdio: queuing unknown CIS tuple 0x82 (1 bytes)
[ 14.971661@4] sdio: new ultra high speed SDR104 SDIO card at address 0001
[ 14.971668@6] sdio: clock 200000000, 4-bit-bus-width
[ 14.971668@6]
[ 14.972116@6] [sdio_reinit] finish
[ 14.999210@7] cfg80211: Calling CRDA to update world regulatory domain
[ 15.080788@0] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Disable! 240
[ 15.280859@0] aml_wifi wifi.35: [extern_wifi_set_enable] WIFI Enable! 240
[ 15.480938@0] sdio_reset_comm():
[ 15.516201@2] sdio: queuing unknown CIS tuple 0x01 (3 bytes)
[ 15.528457@2] sdio: queuing unknown CIS tuple 0x1a (5 bytes)
[ 15.533750@2] sdio: queuing unknown CIS tuple 0x1b (8 bytes)
[ 15.537643@2] sdio: clk 200000000 SDR mode tuning start
[ 15.537925@2] sdio: rx_tuning_result[1] = 10
[ 15.538165@2] sdio: rx_tuning_result[2] = 10
[ 15.538405@2] sdio: rx_tuning_result[3] = 10
[ 15.538648@2] sdio: rx_tuning_result[4] = 10
[ 15.538653@2] sdio: best_win_start =1, best_win_size =4
[ 15.538657@2] sdio: sd_emmc_regs->gclock=0x1000245,sd_emmc_regs->gadjust=0x32000
[ 15.538664@2] sdio: gclock =0x1000245, gdelay=0x0, gadjust=0x32000
[ 15.538668@2] [sdio_reinit] finish
[ 15.538676@2] wlan: loading driver v4.5.20.037
[ 15.538978@2] hifDeviceInserted: Dumping clocks (50000000,200000000)
[ 15.538985@2] Decrease host clock from 50000000 to 200000000(50000000,200000000)
[ 15.538992@2] HIFDumpCCCR 0(43) 1(3) 2(0) 3(0) 4(0) 5(0) 6(0) 7(6) 8(17) 9(0) A(10) B(0) C(0) D(0) E(0) F(0) 10(0) 11(0) 12(1) 13(7) 14(7) 15(37) 16(1)
[ 15.539711@2] host caps:0x00078107, card_sd3_bus_mode:0x0000001C
[ 15.539718@2] hifDeviceInserted: Set MMC bus mode to SDR104.
[ 15.539863@2] AR6000: Set async interrupt delay clock as 2.
[ 15.541404@2] ath_hif_sdio: HIF (Atheros/multi-bss)
[ 15.649823@4] AR6000: configuration opcode 3 is not used for Linux SDIO stack
[ 15.650352@6] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[ 15.657636@7] Board extended Data download address: 0x0
[ 15.672918@5] ol_download_firmware: Using 0x1234 for the remainder of init
[ 15.716618@5] ol_transfer_bin_file: Loading setup file qsetup30.bin
[ 15.716889@5] android_readwrite_file: file /lib/firmware/qsetup30.bin filp_open error
[ 15.716897@5] ol_transfer_bin_file: Failed to get qsetup30.bin
[ 16.790177@5] HIF Interrupt processing is SYNC ONLY
[ 16.790194@5] AR6000: configuration opcode 7 is only used for RTOS systems, not Linux systems
[ 16.790200@5] AR6000: configuration opcode 5 is not used for Linux SDIO stack
[ 16.790373@5] WDA_open-4688: WMA --> wmi_unified_attach - success
[ 16.790405@5] ol_if_dfs_attach: called; ptr=ffffffc05be01b54, radar_info=ffffffc063123b88
[ 16.790773@5] +HWT
[ 16.799583@6] -HWT
[ 16.799683@7] MAILBOX SWAP Service is enabled!
[ 16.799689@7] Reduced Tx Complete service is enabled!
[ 16.800886@7] is_full_reorder_offloaded? 0
[ 16.809532@7] HTC Service:0x0300 ep:1 TX flow control disabled
[ 16.809584@7] htt_tx_attach:htt_desc_start:0xffffffc059c20000 htt_desc_end:0xffffffc059c3c200
[ 16.819614@6] wma_pre_start-5056: WMA --> wmi_unified_connect_htc_service - success
[ 16.819655@0] wma_mc_process_msg-21956: McThread: WNI_CFG_DNLD_REQ
[ 16.839622@5] __wmi_control_rx: WMI UNIFIED SERVICE READY event
[ 16.839641@5] wma_rx_service_ready_event-24791: WMA <-- WMI_SERVICE_READY_EVENTID
[ 16.839655@5] wma_rx_service_ready_event-24906: WMA --> WMI_INIT_CMDID
[ 16.849526@5] __wmi_control_rx: WMI UNIFIED READY event
[ 16.849534@5] wma_rx_ready_event-24935: WMA <-- WMI_READY_EVENTID
[ 16.850656@6] android_readwrite_file: file /lib/firmware/wlan/wlan_mac.bin filp_open error
[ 16.851086@6] session id - 0, AddSta session - 0
[ 16.851130@7] wma_vdev_attach-5905: vdev_id 0, txrx_vdev_handle = ffffffc062359a00
[ 16.852713@6] session id - 1, AddSta session - 0
[ 16.852762@7] wma_vdev_attach-5905: vdev_id 1, txrx_vdev_handle = ffffffc062359800
[ 16.852773@7] wma_vdev_attach-5971: P2P Device: creating self peer f2:03:8c:a6:35:b5, vdev_id 1
[ 16.855565@6] Host SW:4.5.20.037, FW:0.0.0.60, HW:QCA9377_REV1_1
[ 16.855645@6] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 0 NumBuff = 32
[ 16.855827@7] wlan_logging_sock_activate_svc: Activated wlan_logging svc
[ 16.855921@2] wlan: driver loaded
[ 16.869707@5] target uses HTT version 3.32; host uses 3.23
[ 16.869721@5] *** Warning: host/target HTT versions are different, though compatible!
[ 16.870427@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 0 to 9600
[ 16.870481@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 9600
[ 16.870503@3] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 9600 to 115200
[ 16.979537@5] TXRX: ol_txrx_peer_find_add_id: Delete Peer ffffffc062253000
[ 17.019869@6] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.182904@4] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.427551@0] audio_dsp: buf=0
[ 17.427567@0] audio_dsp: IEC958_mode_raw=0
[ 17.427604@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 17.427608@0] audio_dsp: last mode 0,now 0
[ 17.433508@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 17.433569@0] aml_spdif_dai: share the same clock
[ 17.433579@0] aml_audio_hw: IEC958 PCM32
[ 17.433586@0] hdmitx: audio: aout notify rate 44100
[ 17.433589@0] hdmitx: audio: aout notify size 32
[ 17.433594@0] hdmitx: audio: aout notify format CT_PCM
[ 17.433598@0] hdmtix: set audio
[ 17.433612@0] hdmitx tx_aud_src = 0
[ 17.433639@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 17.433643@0] hdmitx aud_n_para = 6272
[ 17.433662@0] hdmitx set channel status
[ 17.433722@0] hdmitx: audio: Audio Type: PCM
[ 17.433725@0] hdmitx: audio: set audio param
[ 17.433735@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 17.434074@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 17.434081@0] aml_spdif_dai: share the same clock
[ 17.434090@0] aml_audio_hw: IEC958 PCM32
[ 17.434095@0] hdmitx: audio: aout notify rate 44100
[ 17.434098@0] hdmitx: audio: aout notify size 32
[ 17.434101@0] hdmitx: audio: no update
[ 17.434108@0] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 17.434337@0] channel count should be 8, we got 2 aborting
[ 17.436556@0] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
[ 17.436571@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
[ 17.598457@0] fb: afbc: 0
[ 17.598718@0] fb: osd[0] canvas.idx =0x40
[ 17.598721@0] fb: osd[0] canvas.addr=0x79300000
[ 17.598723@0] fb: osd[0] canvas.width=7680
[ 17.598725@0] fb: osd[0] canvas.height=3240
[ 17.598726@0] fb: osd[0] frame.width=1920
[ 17.598728@0] fb: osd[0] frame.height=1080
[ 18.085702@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
[ 18.085722@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
[ 18.085775@6] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 18.085793@6] aml_spdif_dai: share the same clock
[ 18.085804@6] aml_audio_hw: IEC958 PCM32
[ 18.085812@6] hdmitx: audio: aout notify rate 44100
[ 18.085817@6] hdmitx: audio: aout notify size 32
[ 18.085822@6] hdmitx: audio: no update
[ 18.085831@6] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 18.086385@0] vout_serve: vmode set to null
[ 18.086416@0] fb: current vmode=1080p60hz, cmd: 0x50000
[ 18.086425@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=59
[ 18.086432@0] tv_vout: mode is 59,sync_duration_den=1,sync_duration_num=60
[ 18.086447@0] tv_vout: 3Invalid video output modes.
[ 18.086452@0] tv_vout: new mode =null set ok
[ 18.086457@0] vout_serve: vinfo mode is: null
[ 18.086462@0] vout_serve: new mode null set ok
[ 18.086476@0] hdmitx: edid: not find mapped vic
[ 18.086484@0] hdmitx: video: get current mode: null
[ 18.086489@0] hdmitx: update rx hdr info 0
[ 18.086493@0] hdmitx: update physcial size: 1600 900
[ 18.086498@0] hdmitx: video: null not valid hdmi mode
[ 18.086526@0] fb: current vmode=null, cmd: 0x10000
[ 18.091708@4] hdmitx: set frac_rate_policy as 0
[ 18.091743@4] vout_serve: vmode set to 1080p60hz
[ 18.091763@4] vout_serve: disable HDMI PHY as soon as possible
[ 18.091770@4] fb: current vmode=null, cmd: 0x50000
[ 18.091777@4] tv_vout: tv_set_current_vmode[919]fps_target_mode=16
[ 18.091784@4] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
[ 18.091796@4] tv_vout: TV mode 1080p60hz selected.
[ 18.091803@4]
[ 18.091803@4] vdac_enable: on:0,module_sel:8
[ 18.091816@4]
[ 18.091816@4] vdac_enable: on:0,module_sel:8
[ 18.091827@4] tv_vout: new mode =1080p60hz set ok
[ 18.091831@4] vout_serve: vinfo mode is: 1080p60hz
[ 18.091836@4] vout_serve: new mode 1080p60hz set ok
[ 18.091854@4] hdmitx: video: get current mode: 1080p60hz
[ 18.091859@4] hdmitx: update rx hdr info 0
[ 18.091863@4] hdmitx: update physcial size: 1600 900
[ 18.091912@4] hdmitx: system: already init VIC = 0 Now VIC = 16
[ 18.091919@4] hdmitx: rx no SCDC present indicator
[ 18.093932@4] hdmitx: ddc rd8b error 0x54 0x01
[ 18.095945@4] hdmitx: ddc rd8b error 0x54 0x01
[ 18.095952@4] hdmirx version is 1.4 or below
[ 18.095957@4] hdmitx div40: 0
[ 18.119440@6] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
[ 18.119448@6] hdmitx: system: set pll
[ 18.119452@6] hdmitx: system: param->VIC:16
[ 18.119458@6] hdmitx: set clk: VIC = 16 cd = 4 frac_rate = 0
[ 18.119471@6] config HPLL = 2970000
[ 18.119495@6] HPLL: 0xc000027b
[ 18.119499@6] config HPLL done
[ 18.119510@6] set_hpll_od3_clk_div[437] div = 6
[ 18.119521@6] j = 4 vid_clk_div = 1
[ 18.119533@6] hdmitx: set enc for VIC: 16
[ 18.119557@6] hdmitx_set_hw[4941] set VIC = 16
[ 18.119779@0] hdmitx: system: irq 80000001
[ 18.119812@0] Start = 0x10000100 End = 0x100001ff
[ 18.119826@0] [0x10000104]: 0x00000001
[ 18.120033@0] [0x10000180]: 0x000000ff
[ 18.120040@0] [0x10000181]: 0x000000ff
[ 18.120046@0] [0x10000182]: 0x00000003
[ 18.120052@0] [0x10000183]: 0x00000007
[ 18.120059@0] [0x10000184]: 0x0000003f
[ 18.120067@0] [0x10000185]: 0x00000002
[ 18.120075@0] [0x10000187]: 0x000000ff
[ 18.120081@0] [0x10000188]: 0x00000003
[ 18.131432@6] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 18.133446@6] hdmitx: ddc w1b error 0x54 0x20 0x00
[ 18.135459@6] hdmitx: ddc rd8b error 0x54 0x21
[ 18.251421@6] hdmitx: system: PHY Setting Done
[ 18.255444@6] Sink is HDMI device
[ 18.255460@6] hdmitx: system: packet: can't get vendor data
[ 18.255466@6] 1080p60hz 60 1
[ 18.255473@6] 1080p60hz 60 1
[ 18.255479@6] hdmtix: set audio
[ 18.255491@6] hdmitx tx_aud_src = 0
[ 18.255523@6] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
[ 18.255529@6] hdmitx aud_n_para = 6272
[ 18.255551@6] hdmitx set channel status
[ 18.255618@6] hdmitx: audio: Audio Type: PCM
[ 18.255638@6] fb: current vmode=1080p60hz, cmd: 0x10000
[ 18.317743@6] fb: osd[0] enable: 1 (kodi.bin)
[ 19.987380@4] audio_dsp: buf=0
[ 19.987397@4] audio_dsp: IEC958_mode_raw=0
[ 19.987439@4] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 19.987445@4] audio_dsp: last mode 0,now 0
[ 19.994892@4] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 19.994897@4] aml_spdif_dai: share the same clock
[ 19.994904@4] aml_audio_hw: IEC958 PCM32
[ 19.994909@4] hdmitx: audio: aout notify rate 44100
[ 19.994911@4] hdmitx: audio: aout notify size 32
[ 19.994913@4] hdmitx: audio: no update
[ 19.994923@4] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 19.995132@4] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 19.995134@4] aml_spdif_dai: share the same clock
[ 19.995140@4] aml_audio_hw: IEC958 PCM32
[ 19.995143@4] hdmitx: audio: aout notify rate 44100
[ 19.995145@4] hdmitx: audio: aout notify size 32
[ 19.995146@4] hdmitx: audio: no update
[ 19.995152@4] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 19.995309@4] channel count should be 8, we got 2 aborting
[ 19.996696@4] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
[ 19.996703@4] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
[ 20.179700@4] libphy: stmmac-0:00 - Link is Up - 100/Full
[ 20.179727@4] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.309485@2] meson_uart c11084c0.serial: ttyS1 use xtal(8M) 24000000 change 115200 to 2000000
[ 21.445774@3] Bluetooth: Core ver 2.18
[ 21.445927@3] NET: Registered protocol family 31
[ 21.445932@3] Bluetooth: HCI device and connection manager initialized
[ 21.445960@3] Bluetooth: HCI socket layer initialized
[ 21.445969@3] Bluetooth: L2CAP socket layer initialized
[ 21.445995@3] Bluetooth: SCO socket layer initialized
[ 21.448884@3] Bluetooth: HCI UART driver ver 2.2
[ 21.448898@3] Bluetooth: HCI H4 protocol initialized
[ 21.448902@3] Bluetooth: HCI BCSP protocol initialized
[ 21.448906@3] Bluetooth: HCILL protocol initialized
[ 21.448910@3] Bluetooth: HCIATH3K protocol initialized
[ 21.448914@3] Bluetooth: HCI Three-wire UART (H5) protocol initialized
[ 99.593726@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
[ 99.593745@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
[ 99.593817@7] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 99.593829@7] aml_spdif_dai: share the same clock
[ 99.593840@7] aml_audio_hw: IEC958 PCM32
[ 99.593848@7] hdmitx: audio: aout notify rate 44100
[ 99.593853@7] hdmitx: audio: aout notify size 32
[ 99.593858@7] hdmitx: audio: no update
[ 99.593867@7] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 207.787119@5] audio_dsp: buf=0
[ 207.787135@5] audio_dsp: IEC958_mode_raw=0
[ 207.787182@5] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 207.787187@5] audio_dsp: last mode 0,now 0
[ 207.794576@5] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 207.794591@5] aml_spdif_dai: share the same clock
[ 207.794602@5] aml_audio_hw: IEC958 PCM32
[ 207.794610@5] hdmitx: audio: aout notify rate 44100
[ 207.794615@5] hdmitx: audio: aout notify size 32
[ 207.794620@5] hdmitx: audio: no update
[ 207.794633@5] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 207.794838@5] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 207.794846@5] aml_spdif_dai: share the same clock
[ 207.794855@5] aml_audio_hw: IEC958 PCM32
[ 207.794862@5] hdmitx: audio: aout notify rate 44100
[ 207.794867@5] hdmitx: audio: aout notify size 32
[ 207.794871@5] hdmitx: audio: no update
[ 207.794881@5] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 207.795086@5] channel count should be 8, we got 2 aborting
[ 207.795899@5] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
[ 207.795913@5] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
[ 465.703139@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 465.828251@4] remote: scancode is 0x0041,invalid key is 0x0000.
[ 467.273912@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 467.398257@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 467.967131@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 468.188283@2] remote: scancode is 0x0041,invalid key is 0x0000.
[ 468.331384@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 468.458247@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 474.272247@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 474.498250@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 474.802846@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 474.928248@4] remote: scancode is 0x0044,invalid key is 0x0000.
[ 476.502678@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 476.728256@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 479.031413@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 479.258247@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 479.305403@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 479.528245@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 480.550463@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 480.778248@5] remote: scancode is 0x0041,invalid key is 0x0000.
[ 480.864353@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 480.988245@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 482.172360@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 482.298238@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 483.288367@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 483.418231@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 483.517968@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 483.638248@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 484.068622@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 484.198239@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 485.414490@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 485.638228@6] remote: scancode is 0x0007,invalid key is 0x0000.
[ 485.753525@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 485.878230@4] remote: scancode is 0x0044,invalid key is 0x0000.
[ 489.109739@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 489.338239@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 489.918885@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 490.048232@6] remote: scancode is 0x0044,invalid key is 0x0000.
[ 493.441101@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 493.668225@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 494.307365@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 494.428220@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 496.958540@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 497.188239@4] remote: scancode is 0x0041,invalid key is 0x0000.
[ 497.279205@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 497.508234@4] remote: scancode is 0x0041,invalid key is 0x0000.
[ 501.504023@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 501.628218@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 501.705148@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 501.928219@1] remote: scancode is 0x0041,invalid key is 0x0000.
[ 502.360976@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 502.488215@5] remote: scancode is 0x0044,invalid key is 0x0000.
[ 504.488449@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 504.718226@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 505.965327@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 506.088217@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 506.156841@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 506.278210@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 506.758383@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 506.888212@4] remote: scancode is 0x0041,invalid key is 0x0000.
[ 507.305279@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 507.428209@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 509.652661@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 509.878206@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 510.290569@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 510.518227@1] remote: scancode is 0x0028,invalid key is 0x0000.
[ 512.077355@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 512.298221@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 513.116544@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 513.338223@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 514.164896@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 514.388208@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 514.497467@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 514.618210@4] remote: scancode is 0x0040,invalid key is 0x0000.
[ 514.929462@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 515.058208@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 515.343345@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 515.468221@6] remote: scancode is 0x0040,invalid key is 0x0000.
[ 515.920371@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 516.148217@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 517.152770@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 517.378202@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 519.613447@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 519.838215@6] remote: scancode is 0x0028,invalid key is 0x0000.
[ 520.517534@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 520.738218@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 522.430193@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 522.658200@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 523.219249@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 523.448210@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 525.055281@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 525.278196@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 526.509076@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 526.738195@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 527.221868@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 527.348205@4] remote: scancode is 0x0044,invalid key is 0x0000.
[ 528.668745@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 528.898202@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 529.902177@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 530.128203@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 530.409397@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 530.538211@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 531.392865@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 531.618217@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 533.404128@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 533.628191@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 534.543457@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 534.768196@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 535.252450@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 535.478193@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 535.639646@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 535.768196@4] remote: scancode is 0x0028,invalid key is 0x0000.
[ 536.404929@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 536.628196@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 537.053562@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 537.178191@4] remote: scancode is 0x0028,invalid key is 0x0000.
[ 597.891350@0] aml_snd_m8_card aml_m8_snd.49: I2S playback disable
[ 597.891369@0] aml_snd_m8_card aml_m8_snd.49: IEC958 playback disable
[ 597.891460@7] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 597.891473@7] aml_spdif_dai: share the same clock
[ 597.891484@7] aml_audio_hw: IEC958 PCM32
[ 597.891492@7] hdmitx: audio: aout notify rate 44100
[ 597.891497@7] hdmitx: audio: aout notify size 32
[ 597.891502@7] hdmitx: audio: no update
[ 597.891512@7] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 624.289122@5] audio_dsp: buf=0
[ 624.289138@5] audio_dsp: IEC958_mode_raw=0
[ 624.289182@5] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 624.289187@5] audio_dsp: last mode 0,now 0
[ 624.297539@5] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 624.297553@5] aml_spdif_dai: share the same clock
[ 624.297564@5] aml_audio_hw: IEC958 PCM32
[ 624.297572@5] hdmitx: audio: aout notify rate 44100
[ 624.297576@5] hdmitx: audio: aout notify size 32
[ 624.297581@5] hdmitx: audio: no update
[ 624.297594@5] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 624.297773@5] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[ 624.297780@5] aml_spdif_dai: share the same clock
[ 624.297789@5] aml_audio_hw: IEC958 PCM32
[ 624.297795@5] hdmitx: audio: aout notify rate 44100
[ 624.297800@5] hdmitx: audio: aout notify size 32
[ 624.297804@5] hdmitx: audio: no update
[ 624.297813@5] aml_snd_m8_card aml_m8_snd.49: i2s/958 same source
[ 624.297978@5] channel count should be 8, we got 2 aborting
[ 624.298886@5] aml_snd_m8_card aml_m8_snd.49: I2S playback enable
[ 624.298901@5] aml_snd_m8_card aml_m8_snd.49: IEC958 playback enable
[ 625.131557@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.358138@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.400234@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.628153@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.662923@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.788137@3] remote: scancode is 0x0041,invalid key is 0x0000.
[ 625.950282@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.078152@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.129246@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.258136@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.326905@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.548131@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.838600@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 626.968140@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 627.102556@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 627.228152@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 627.518462@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 627.648142@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 628.456034@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 628.578140@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 630.686915@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 630.808129@6] remote: scancode is 0x0006,invalid key is 0x0000.
[ 631.406768@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 631.628160@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 631.788970@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 631.918156@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 631.998598@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 632.128133@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 632.408498@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 632.538147@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 634.713864@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 634.938150@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 637.164823@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 637.288126@6] remote: scancode is 0x0006,invalid key is 0x0000.
[ 637.672230@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 637.798133@4] remote: scancode is 0x0040,invalid key is 0x0000.
[ 637.918686@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 638.148145@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 638.734890@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 638.958130@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 639.971978@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 640.198124@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 640.601101@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 640.728125@7] remote: scancode is 0x0044,invalid key is 0x0000.
[ 643.481309@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 643.708136@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 645.656355@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 645.878123@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 647.936320@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 648.158142@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 649.566188@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 649.788132@4] remote: scancode is 0x0041,invalid key is 0x0000.
[ 650.119387@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 650.248129@5] remote: scancode is 0x0041,invalid key is 0x0000.
[ 650.522788@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 650.648128@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 653.049980@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 653.278140@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 654.084073@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 654.208136@5] remote: scancode is 0x0006,invalid key is 0x0000.
[ 654.841503@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 654.968119@5] remote: scancode is 0x0041,invalid key is 0x0000.
[ 655.244990@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 655.368120@5] remote: scancode is 0x0006,invalid key is 0x0000.
[ 655.571136@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 655.698123@7] remote: scancode is 0x0044,invalid key is 0x0000.
[ 656.812511@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 657.038136@2] remote: scancode is 0x0044,invalid key is 0x0000.
[ 657.783223@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 658.008128@1] remote: scancode is 0x0028,invalid key is 0x0000.
[ 658.685517@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 658.808115@5] remote: scancode is 0x0028,invalid key is 0x0000.
[ 660.410052@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 660.538116@6] remote: scancode is 0x0006,invalid key is 0x0000.
[ 661.789237@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 662.018119@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 663.433400@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 663.558118@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 664.603241@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 664.828113@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 666.329066@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 666.558121@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 671.349008@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 671.578112@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 672.253884@0] remote: scancode is 0x0028,invalid key is 0x0000.
[ 672.378110@4] remote: scancode is 0x0028,invalid key is 0x0000.
[ 673.873479@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 674.098115@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 674.185888@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 674.308121@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 674.754902@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 674.878109@6] remote: scancode is 0x0040,invalid key is 0x0000.
[ 675.480730@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 675.608112@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 675.999700@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 676.228119@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 676.606458@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 676.728107@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 676.959122@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 677.088126@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 678.130321@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 678.258113@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 678.551988@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 678.778119@3] remote: scancode is 0x0044,invalid key is 0x0000.
[ 680.020514@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 680.148111@7] remote: scancode is 0x0006,invalid key is 0x0000.
[ 680.247816@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 680.368125@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 680.416042@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 680.538122@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 681.312749@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 681.538115@6] remote: scancode is 0x0007,invalid key is 0x0000.
[ 681.729513@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 681.858110@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 685.174639@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 685.398119@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 685.606965@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 685.728103@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 685.888552@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 686.018127@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 686.066564@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 686.188108@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 686.751345@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 686.878099@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 687.577729@0] remote: scancode is 0x0006,invalid key is 0x0000.
[ 687.698104@7] remote: scancode is 0x0006,invalid key is 0x0000.
[ 688.308214@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 688.538111@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 688.725457@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 688.848113@7] remote: scancode is 0x0041,invalid key is 0x0000.
[ 689.000021@0] remote: scancode is 0x0041,invalid key is 0x0000.
[ 689.228108@6] remote: scancode is 0x0041,invalid key is 0x0000.
[ 689.438391@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 689.668125@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 692.307046@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 692.528101@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 695.963076@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 696.188125@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 697.893318@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 698.118125@0] remote: scancode is 0x0040,invalid key is 0x0000.
[ 698.449170@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 698.578118@1] remote: scancode is 0x0044,invalid key is 0x0000.
[ 700.399192@0] remote: scancode is 0x0007,invalid key is 0x0000.
[ 700.628119@4] remote: scancode is 0x0007,invalid key is 0x0000.
[ 701.095636@0] remote: scancode is 0x0044,invalid key is 0x0000.
[ 701.218098@5] remote: scancode is 0x0044,invalid key is 0x0000.