### lsusb: Bus 005 Device 002: ID 0781:5590 SanDisk Corp. Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=orion-ehci/1p, 480M ### lspci: 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04) 00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04) 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 02:00.0 SATA controller: Marvell Technology Group Ltd. Device 9215 (rev 11) ### Installed packages: ii armbian-firmware 5.33 armhf Linux firmware ii armbian-tools-jessie 5.33 armhf Armbian tools, temper, Cubie bt utils ii hostapd 1:2.5~armbian5.31+1 armhf IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator ii linux-base 3.5 all Linux image base package hi linux-dtb-next-mvebu 5.32 armhf Linux DTB, version 4.12.13-mvebu hi linux-headers-next-mvebu 5.32 armhf Linux kernel headers for 4.12.13-mvebu on armhf hi linux-image-next-mvebu 5.32 armhf Linux kernel, version 4.12.13-mvebu hi linux-jessie-root-next-clearfogpro 5.33 armhf Armbian tweaks for jessie on clearfogpro (next branch) ii linux-libc-dev:armhf 3.16.43-2+deb8u3 armhf Linux support headers for userspace development hi linux-u-boot-clearfogpro-next 5.33 armhf Uboot loader 2013.01 ii openmediavault 3.0.88 all Open network attached storage solution ii openmediavault-flashmemory 3.5 all folder2ram plugin for OpenMediaVault ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive ii openmediavault-netatalk 3.2.10 all OpenMediaVault netatalk (AppleTalk Protocol Suite) plugin ii openmediavault-omvextrasorg 3.4.26 all OMV-Extras.org Package Repositories for OpenMediaVault ii sunxi-tools 1.4.2-1~armbian5.31+1 armhf tools for working with Allwinner (sunxi) ARM processors ### Loaded modules: Module Size Used by raid456 102400 1 async_raid6_recov 16384 1 raid456 async_memcpy 16384 1 raid456 async_pq 16384 1 raid456 async_xor 16384 2 async_pq,raid456 async_tx 16384 5 async_xor,async_pq,raid456,async_memcpy,async_raid6_recov binfmt_misc 16384 1 cfg80211 188416 0 rfkill 20480 1 cfg80211 zram 20480 2 zsmalloc 20480 1 zram nfsd 180224 2 marvell_cesa 28672 0 zfs 2240512 0 zunicode 327680 1 zfs zavl 16384 1 zfs icp 225280 1 zfs zcommon 53248 1 zfs znvpair 49152 2 zcommon,zfs spl 61440 4 znvpair,zcommon,zfs,icp mv_cesa 20480 0 md_mod 90112 2 raid456 mv88e6xxx 49152 5 dsa_core 24576 1 mv88e6xxx devlink 28672 1 dsa_core ### nand-sata-install.log: Thu Sep 14 17:50:13 CEST 2017: Start nand-sata-install. Performing full device TRIM (11.44GiB) ... Detected a SSD, turning off metadata duplication. Mkfs with -m dup if you want to force metadata duplication. Btrfs v3.17 See http://btrfs.wiki.kernel.org for more information. Turning ON incompat feature 'extref': increased hardlink limit per file to 65536 fs created label (null) on /dev/sda1 nodesize 16384 leafsize 16384 sectorsize 4096 size 11.44GiB Old UUID: UUID=886631bb-15c3-4ced-bac7-6beabb256d56 SD UUID: UUID=36658cbe-06c8-4af6-991c-8a9a4cdb6b32 SATA UUID: UUID=2cbc4700-b0c1-48bd-87bd-17c91b33b30a eMMC UUID: Boot: $1 Root: $2 /dev/sda1 btrfs Usage: 868 Dest: 11449 /etc/fstab: UUID=886631bb-15c3-4ced-bac7-6beabb256d56 / btrfs defaults,noatime,nodiratime,commit=600,compress=lzo 0 1 UUID=36658cbe-06c8-4af6-991c-8a9a4cdb6b32 /boot ext4 defaults,commit=600,errors=remount-ro 0 2 tmpfs /tmp tmpfs defaults 0 0 /etc/mtab: /dev/mmcblk0p1 /boot ext4 rw,relatime,errors=remount-ro,commit=600,data=ordered 0 0 /dev/mmcblk0p2 / btrfs rw,noatime,nodiratime,compress=lzo,ssd,space_cache,commit=600,subvolid=5,subvol=/ 0 0 /dev/sda1 /mnt/nand-sata-install.BnmfId/rootfs btrfs rw,relatime,compress-force=zlib,ssd,space_cache,subvolid=5,subvol=/ 0 0 Files currently open for writing: master 1486 root 10u REG 0,19 17 51797 /var/lib/postfix/master.lock nmbd 1520 root 5w REG 0,19 2 82792 /var/cache/samba/lck/1520 smbd 1530 root 4w REG 0,19 20 82796 /var/cache/samba/lck/1530 smbd 1530 root 6u REG 0,19 430080 51876 /var/lib/samba/private/secrets.tdb smbd 1530 root 25u REG 0,19 421888 51881 /var/lib/samba/share_info.tdb smbd 1530 root 26u REG 0,19 430080 51883 /var/cache/samba/gencache.tdb smbd 1530 root 28u REG 0,19 696 51884 /var/lib/samba/group_mapping.tdb smbd 1530 root 29u REG 0,19 421888 51885 /var/lib/samba/account_policy.tdb smbd 1530 root 30u REG 0,19 421888 51887 /var/lib/samba/private/passdb.tdb dhclient 1653 root 4w REG 0,19 1118 51638 /var/lib/dhcp/dhclient.eth0.leases Trying to stop running services to minimize open files: Stopping smbd.service Stopping proftpd.service Stopping nmbd.service Stopping nfs-common.service Stopping netatalk.service Stopping monit.service Stopping cron.service Stopping anacron.service Stopping snmpd.service Stopping postfix.service Stopping nginx.service Checking again for open files: Copying 80547 files to /dev/sda1. ### Current sysinfo: Linux 4.12.13-mvebu (clearfogpro) 09/18/2017 _armv7l_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 1.01 0.00 0.84 0.09 0.00 98.05 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn mmcblk0 0.18 3.44 6.47 801208 1509216 mmcblk0p1 0.00 0.04 0.04 9188 9796 mmcblk0p2 0.09 2.72 6.43 634206 1499420 mmcblk0p3 0.08 0.66 0.00 154612 0 sda 6.80 544.19 237.30 126870941 55323399 sdb 6.78 544.14 237.30 126859864 55323415 sdc 6.82 544.39 237.30 126918970 55323527 sdd 0.00 0.02 0.00 5427 36 sdd1 0.00 0.02 0.00 4372 36 zram0 0.10 0.08 0.32 18040 75596 zram1 0.10 0.07 0.32 17392 74804 md0 12.79 181.80 134.80 42383661 31425872 procs ---------------memory-------------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 96768 728696 320 73316 0 0 56 71 79 75 1 1 98 0 0 total used free shared buffers cached Mem: 1.0G 292M 711M 1.1M 320K 71M -/+ buffers/cache: 220M 783M Swap: 502M 94M 407M [ 3.895226] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601 [ 3.895246] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x0007] [ 3.895257] pci 0000:01:00.0: reg 0x14: [io 0x0000-0x0003] [ 3.895267] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x0007] [ 3.895276] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x0003] [ 3.895286] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x001f] [ 3.895296] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 3.895307] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 3.895484] PCI: bus1: Fast back to back transfers disabled [ 3.895492] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.895590] pci 0000:02:00.0: [1b4b:9215] type 00 class 0x010601 [ 3.895610] pci 0000:02:00.0: reg 0x10: [io 0x8000-0x8007] [ 3.895621] pci 0000:02:00.0: reg 0x14: [io 0x8040-0x8043] [ 3.895631] pci 0000:02:00.0: reg 0x18: [io 0x8100-0x8107] [ 3.895642] pci 0000:02:00.0: reg 0x1c: [io 0x8140-0x8143] [ 3.895652] pci 0000:02:00.0: reg 0x20: [io 0x800000-0x80001f] [ 3.895664] pci 0000:02:00.0: reg 0x24: [mem 0x00900000-0x009007ff] [ 3.895675] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.895726] pci 0000:02:00.0: PME# supported from D3hot [ 3.895885] PCI: bus2: Fast back to back transfers disabled [ 3.895893] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.896012] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff] [ 3.896020] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0100000-0xe01fffff] [ 3.896027] pci 0000:00:02.0: BAR 7: assigned [io 0x10000-0x10fff] [ 3.896034] pci 0000:00:03.0: BAR 7: assigned [io 0x20000-0x20fff] [ 3.896045] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 3.896052] pci 0000:01:00.0: BAR 5: assigned [mem 0xe0010000-0xe00101ff] [ 3.896061] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1001f] [ 3.896069] pci 0000:01:00.0: BAR 0: assigned [io 0x10020-0x10027] [ 3.896078] pci 0000:01:00.0: BAR 2: assigned [io 0x10028-0x1002f] [ 3.896086] pci 0000:01:00.0: BAR 1: assigned [io 0x10030-0x10033] [ 3.896094] pci 0000:01:00.0: BAR 3: assigned [io 0x10034-0x10037] [ 3.896103] pci 0000:00:02.0: PCI bridge to [bus 01] [ 3.896109] pci 0000:00:02.0: bridge window [io 0x10000-0x10fff] [ 3.896116] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe00fffff] [ 3.896129] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0100000-0xe013ffff pref] [ 3.896138] pci 0000:02:00.0: BAR 5: assigned [mem 0xe0140000-0xe01407ff] [ 3.896146] pci 0000:02:00.0: BAR 4: assigned [io 0x20000-0x2001f] [ 3.896154] pci 0000:02:00.0: BAR 0: assigned [io 0x20020-0x20027] [ 3.896162] pci 0000:02:00.0: BAR 2: assigned [io 0x20028-0x2002f] [ 3.896169] pci 0000:02:00.0: BAR 1: assigned [io 0x20030-0x20033] [ 3.896177] pci 0000:02:00.0: BAR 3: assigned [io 0x20034-0x20037] [ 3.896185] pci 0000:00:03.0: PCI bridge to [bus 02] [ 3.896191] pci 0000:00:03.0: bridge window [io 0x20000-0x20fff] [ 3.896199] pci 0000:00:03.0: bridge window [mem 0xe0100000-0xe01fffff] [ 3.896359] ahci 0000:01:00.0: version 3.0 [ 3.896371] pci 0000:00:02.0: enabling device (0140 -> 0143) [ 3.896390] ahci 0000:01:00.0: enabling device (0140 -> 0143) [ 3.896512] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 3.896548] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 3.896557] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 3.897541] scsi host5: ahci [ 3.897840] scsi host6: ahci [ 3.898050] ata5: SATA max UDMA/133 abar m512@0xe0010000 port 0xe0010100 irq 55 [ 3.898055] ata6: SATA max UDMA/133 abar m512@0xe0010000 port 0xe0010180 irq 55 [ 3.898188] pci 0000:00:03.0: enabling device (0140 -> 0143) [ 3.909293] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 3.909303] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 3.911274] scsi host7: ahci [ 3.911613] scsi host8: ahci [ 3.911947] scsi host9: ahci [ 3.912271] scsi host10: ahci [ 3.912521] ata7: SATA max UDMA/133 abar m2048@0xe0140000 port 0xe0140100 irq 56 [ 3.912526] ata8: SATA max UDMA/133 abar m2048@0xe0140000 port 0xe0140180 irq 56 [ 3.912531] ata9: SATA max UDMA/133 abar m2048@0xe0140000 port 0xe0140200 irq 56 [ 3.912536] ata10: SATA max UDMA/133 abar m2048@0xe0140000 port 0xe0140280 irq 56 [ 3.913095] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.975368] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.976036] ata1.00: ATA-10: TS120GMTS420, P1025F8, max UDMA/133 [ 3.976042] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 3.976438] ata1.00: configured for UDMA/133 [ 3.976783] scsi 0:0:0:0: Direct-Access ATA TS120GMTS420 5F8 PQ: 0 ANSI: 5 [ 3.977608] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.977645] sd 0:0:0:0: [sda] Write Protect is off [ 3.977653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.977716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.980570] sda: sda1 sda9 [ 3.981530] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.222820] ata5: SATA link down (SStatus 0 SControl 300) [ 4.242073] ata8: SATA link down (SStatus 0 SControl 300) [ 4.243057] ata10: SATA link down (SStatus 0 SControl 300) [ 4.244455] ata7: SATA link down (SStatus 0 SControl 300) [ 4.414658] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.415334] ata9.00: ATA-10: INTEL SSDSC2KW120H6, LSF036C, max UDMA/133 [ 4.415340] ata9.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.415783] ata9.00: configured for UDMA/133 [ 4.759883] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.762056] ata6.00: NCQ Send/Recv Log not supported [ 4.762061] ata6.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133 [ 4.762067] ata6.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 4.762534] ata6.00: NCQ Send/Recv Log not supported [ 4.762543] ata6.00: configured for UDMA/133 [ 4.762850] scsi 6:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5 [ 4.763562] sd 6:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 4.763599] sd 6:0:0:0: [sdb] Write Protect is off [ 4.763606] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.763678] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.763839] scsi 9:0:0:0: Direct-Access ATA INTEL SSDSC2KW12 036C PQ: 0 ANSI: 5 [ 4.764724] sd 9:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 4.764759] sd 9:0:0:0: [sdc] Write Protect is off [ 4.764766] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.764825] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.768107] sdc: sdc1 sdc9 [ 4.769125] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 4.791001] sdb: sdb1 sdb9 [ 4.792048] sd 6:0:0:0: [sdb] Attached SCSI disk [ 4.792976] Freeing unused kernel memory: 1024K [ 4.828637] systemd-udevd[171]: starting version 215 [ 4.904781] scsi 4:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [ 4.905740] sd 4:0:0:0: [sdd] 242614272 512-byte logical blocks: (124 GB/116 GiB) [ 4.906646] sd 4:0:0:0: [sdd] Write Protect is off [ 4.906654] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 4.906983] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.936198] sdd: sdd1 [ 4.937737] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 4.950660] mv88e6085 f1072004.mdio-mii:04: switch 0x176 detected: Marvell 88E6176, revision 1 [ 5.238430] libphy: mv88e6xxx SMI: probed [ 5.238487] DSA: switch 0 0 parsed [ 5.238490] DSA: tree 0 parsed [ 6.125083] Marvell 88E1540 mv88e6xxx-0:00: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:00, irq=-1) [ 6.237312] Marvell 88E1540 mv88e6xxx-0:01: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:01, irq=-1) [ 6.345078] Marvell 88E1540 mv88e6xxx-0:02: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:02, irq=-1) [ 6.455077] Marvell 88E1540 mv88e6xxx-0:03: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:03, irq=-1) [ 6.564668] Marvell 88E1540 mv88e6xxx-0:04: attached PHY driver [Marvell 88E1540] (mii_bus:phy_addr=mv88e6xxx-0:04, irq=-1) [ 6.575626] Generic PHY fixed-0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:03, irq=-1) [ 6.925403] BTRFS: device fsid 886631bb-15c3-4ced-bac7-6beabb256d56 devid 1 transid 882 /dev/mmcblk0p2 [ 7.000002] BTRFS info (device mmcblk0p2): disk space caching is enabled [ 7.000008] BTRFS info (device mmcblk0p2): has skinny extents [ 7.029550] BTRFS info (device mmcblk0p2): detected SSD devices, enabling SSD mode [ 7.366486] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 7.366663] systemd[1]: Detected architecture 'arm'. [ 7.406220] systemd[1]: Set hostname to . [ 7.685781] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 7.688822] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 7.689126] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.689174] systemd[1]: Expecting device dev-ttyS0.device... [ 7.717599] systemd[1]: Starting Remote File Systems (Pre). [ 7.744498] systemd[1]: Reached target Remote File Systems (Pre). [ 7.744586] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 8.673861] spl: loading out-of-tree module taints kernel. [ 8.676320] SPL: Loaded module v0.7.0-12_g9df9692 [ 8.679430] znvpair: module license 'CDDL' taints kernel. [ 8.679434] Disabling lock debugging due to kernel taint [ 9.583788] systemd-udevd[330]: starting version 215 [ 10.297448] ZFS: Loaded module v0.7.0-71_g0107f69, ZFS pool version 5000, ZFS filesystem version 5 [ 10.311027] marvell-cesa f1090000.crypto: CESA device successfully registered [ 10.536390] BTRFS: device fsid 1f0cab5f-cc5d-4444-9f81-35d0d2dbaebb devid 1 transid 156 /dev/sdc [ 11.505010] BTRFS warning (device mmcblk0p2): excessive commit interval 600 [ 11.505018] BTRFS info (device mmcblk0p2): use lzo compression [ 11.505020] BTRFS info (device mmcblk0p2): disk space caching is enabled [ 11.736066] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl [ 11.866621] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: commit=600,errors=remount-ro [ 73.411239] random: crng init done [ 98.899250] systemd-journald[326]: Received request to flush runtime journal from PID 1 [ 99.949894] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 102.159278] zram: Added device: zram0 [ 102.161048] zram: Added device: zram1 [ 102.221341] zram0: detected capacity change from 0 to 263290880 [ 102.471553] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 102.687172] Adding 257116k swap on /dev/zram0. Priority:5 extents:1 across:257116k SSFS [ 102.689622] zram1: detected capacity change from 0 to 263290880 [ 102.769815] Adding 257116k swap on /dev/zram1. Priority:5 extents:1 across:257116k SSFS [ 105.750915] mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 105.830913] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off [ 105.913674] mv88e6085 f1072004.mdio-mii:04 lan6: Link is Up - 1Gbps/Full - flow control off [ 106.013203] mv88e6085 f1072004.mdio-mii:04 lan5: Link is Down [ 106.100592] mv88e6085 f1072004.mdio-mii:04 lan2: Link is Down [ 106.107692] mv88e6085 f1072004.mdio-mii:04 lan3: Link is Down [ 106.114696] mv88e6085 f1072004.mdio-mii:04 lan4: Link is Down [ 106.167841] mv88e6085 f1072004.mdio-mii:04 lan1: Link is Down [80979.287099] sda: sda1 sda9 [80979.289783] sda: sda1 sda9 [80979.297641] sda: sda1 sda9 [80979.613635] sdb: sdb1 sdb9 [80979.888480] sdc: sdc1 sdc9 [80979.896560] sdc: sdc1 sdc9 [228485.722350] sdb: sdb1 sdb9 [228500.781259] sdc: sdc1 sdc9 [228523.863365] sda: sda1 sda9 [228564.468427] async_tx: api initialized (async) [228564.510045] md/raid:md0: not clean -- starting background reconstruction [228564.510406] md/raid:md0: device sda operational as raid disk 2 [228564.510411] md/raid:md0: device sdb operational as raid disk 1 [228564.510415] md/raid:md0: device sdc operational as raid disk 0 [228564.522898] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2 [228564.534019] md0: detected capacity change from 0 to 239933063168 [228564.536932] md: resync of RAID array md0 [228847.023547] mmcblk0: error -84 transferring data, sector 31746, nr 1024, cmd response 0x900, card status 0xc00 [228847.191091] mmcblk0: error -84 transferring data, sector 45058, nr 1024, cmd response 0x900, card status 0xc00 [228847.732693] mmcblk0: error -84 transferring data, sector 57346, nr 1024, cmd response 0x900, card status 0xc00 [229155.541137] ata6.00: exception Emask 0x10 SAct 0x100000 SErr 0x400000 action 0x6 frozen [229155.541141] ata6.00: irq_stat 0x08000000, interface fatal error [229155.541145] ata6: SError: { Handshk } [229155.541150] ata6.00: failed command: WRITE FPDMA QUEUED [229155.541158] ata6.00: cmd 61/00:a0:00:04:68/04:00:06:00:00/40 tag 20 ncq dma 524288 out res 40/00:a0:00:04:68/00:00:06:00:00/40 Emask 0x10 (ATA bus error) [229155.541160] ata6.00: status: { DRDY } [229155.541165] ata6: hard resetting link [229156.041088] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [229156.041529] ata6.00: NCQ Send/Recv Log not supported [229156.041977] ata6.00: NCQ Send/Recv Log not supported [229156.041983] ata6.00: configured for UDMA/133 [229156.041997] ata6: EH complete [229411.209988] ata6.00: exception Emask 0x10 SAct 0x4 SErr 0x400000 action 0x6 frozen [229411.209993] ata6.00: irq_stat 0x08000000, interface fatal error [229411.209996] ata6: SError: { Handshk } [229411.210002] ata6.00: failed command: WRITE FPDMA QUEUED [229411.210009] ata6.00: cmd 61/20:10:00:44:40/02:00:09:00:00/40 tag 2 ncq dma 278528 out res 40/00:10:00:44:40/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [229411.210012] ata6.00: status: { DRDY } [229411.210019] ata6: hard resetting link [229411.709860] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [229411.710299] ata6.00: NCQ Send/Recv Log not supported [229411.710750] ata6.00: NCQ Send/Recv Log not supported [229411.710757] ata6.00: configured for UDMA/133 [229411.710771] ata6: EH complete [229536.014446] ata6.00: exception Emask 0x10 SAct 0x80 SErr 0x400000 action 0x6 frozen [229536.014450] ata6.00: irq_stat 0x08000000, interface fatal error [229536.014454] ata6: SError: { Handshk } [229536.014459] ata6.00: failed command: WRITE FPDMA QUEUED [229536.014466] ata6.00: cmd 61/00:38:00:40:a0/04:00:0a:00:00/40 tag 7 ncq dma 524288 out res 40/00:38:00:40:a0/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [229536.014469] ata6.00: status: { DRDY } [229536.014475] ata6: hard resetting link [229536.514379] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [229536.514818] ata6.00: NCQ Send/Recv Log not supported [229536.515273] ata6.00: NCQ Send/Recv Log not supported [229536.515280] ata6.00: configured for UDMA/133 [229536.515295] ata6: EH complete [229549.213847] ata6: limiting SATA link speed to 3.0 Gbps [229549.213854] ata6.00: exception Emask 0x10 SAct 0x20000 SErr 0x400000 action 0x6 frozen [229549.213856] ata6.00: irq_stat 0x08000000, interface fatal error [229549.213860] ata6: SError: { Handshk } [229549.213865] ata6.00: failed command: WRITE FPDMA QUEUED [229549.213872] ata6.00: cmd 61/00:88:00:1c:c4/04:00:0a:00:00/40 tag 17 ncq dma 524288 out res 40/00:88:00:1c:c4/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [229549.213874] ata6.00: status: { DRDY } [229549.213880] ata6: hard resetting link [229549.713796] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [229549.714241] ata6.00: NCQ Send/Recv Log not supported [229549.714701] ata6.00: NCQ Send/Recv Log not supported [229549.714708] ata6.00: configured for UDMA/133 [229549.714721] ata6: EH complete [229835.374091] md: md0: resync done. [230406.161359] EXT4-fs (md0): mounting with "discard" option, but the device does not support discard [230406.161365] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,discard,acl [230410.523259] systemd[1]: Started ACPI event daemon. [230410.523289] systemd[1]: Listening on ACPID Listen Socket. [230411.291441] systemd[1]: Started ACPI event daemon. [230411.291476] systemd[1]: Listening on ACPID Listen Socket.